Skip to contentSkip to conversation

: Ali M1535 controller, AC'97 0 does not respond

ALSA - driver 0000851 [email protected] 1 participant 1 message Jan 28, 2005

lore
Share & tools
lore
#0 lore raw

A NOTE has been added to this issue.
======================================================================
<https://bugtrack.alsa-project.org/alsa-bug/view.php?id=851>
======================================================================
Reported By: omargosh
Assigned To:
======================================================================

Project:                    ALSA - driver
Issue ID:                   851
Category:                   PCI - ali5451
Reproducibility:            always
Severity:                   major
Priority:                   normal
Status:                     new
Distribution:               Fedora FC3
Kernel Version:             2.6.10
======================================================================
Date Submitted:             01-27-2005 21:46 CET
Last Modified:              01-28-2005 22:40 CET

======================================================================
Summary: Ali M1535 controller, AC'97 0 does not respond
Description:
My Ali5451 rev 1 based card (embedded in an Ali M1535 controller) is not detected.

dmesg shows:

PCI: Found IRQ 9 for device 0000:00:04.0 AC'97 0 does not respond - RESET
AC'97 0 access is not valid [0x0], removing mixer. ali mixer creating error.
ALI 5451: probe of 0000:00:04.0 failed with error -5
======================================================================

----------------------------------------------------------------------
omargosh - 01-28-05 22:40
----------------------------------------------------------------------
I've been playing around with the ali5451.c code trying to see why the codec does not respond. As a test I put a printk in the oss/ac97_codec.c to print out what it found for vendor id codes (below is a dmesg using the oss trident module). Its interesting to note that the oss/trident module continues to work even without being ablt to identify the codec id's where-as the alsa/ali5451 module will give up. The fact that the codec returns only 0 for it's ids may be specific only to the M1535 chipset. I'm willing to try any suggestions to tweak around with the code...

Trident 4DWave/SiS 7018/ALi 5451,Tvia CyberPro 5050 PCI Audio, version 0.14.10j-2.6, 15:30:31 Jan 28 2005
PCI: Found IRQ 9 for device 0000:00:04.0
trident: ALi Audio Accelerator found at IO 0x1000, IRQ 9
ac97_codec: AC97 codec, id(0,0): (Unknown)

Issue History
Date Modified Username Field Change
======================================================================

01-27-05 21:46 omargosh       New Issue                                    
01-27-05 21:46 omargosh       Distribution              => Fedora FC3      
01-27-05 21:46 omargosh       Kernel Version            => 2.6.10          
01-28-05 22:40 omargosh       Note Added: 0003437                          

======================================================================

-------------------------------------------------------
This SF.Net email is sponsored by: IntelliVIEW -- Interactive Reporting Tool for open source databases. Create drag-&-drop reports. Save time by over 75%! Publish reports on the web. Export to DOC, XLS, RTF, etc. Download a FREE copy at http://www.intelliview.com/go/osdn_nl