Skip to contentSkip to conversation

Random Sig'11 in XF864 with kernel > 2.2.x

DISCUSSION Jeffrey Ingber 2 participants 2 messages Sep 15, 2001

lore
Share & tools
lore
#0 lore raw

Hello kernel developers:

I'm experiencing random Signal 11's on kernels in the 2.4 series with XFree86 4 and SMP configurations. Here a some threads to the XFree86 mailing lists which suggest that the Signal 11's are kernel related. Downgrading to a 2.2 series kernel solves these problems:

http://www.xfree86.org/pipermail/xpert/2001-September/011053.html
http://www.xfree86.org/pipermail/xpert/2001-September/011229.html

Here's a snippet from my posting to the list:

----

Quoted 3 lines

Dell PowerEdge 6300 (Quad Xeon 500) with ATI Rage 128 IBM Netfinity 5600 (Dual PIII 667) with Matrox MMS Quad Monitor Tyan Tunderbolt S1873UANG-R (Dual PIII 600) with Matrox Marvel G400

I'll bet it goes away if you don't use a 2.4 SMP kernel.
That is, use a 2.4 UP kernel or a 2.2 UP/SMP kernel.
---

And this turned out to be the case. Is there anything that I could do help fix this? Is there anyone else on this list that has had similar problems and has overcome this?

Thanks for listening.
Jeffrey H. Ingber (jhingber _at_ ix.netcom.com)

#1 lore raw
Quoted 18 lines · Jeffrey Ingber

Hello kernel developers:

I'm experiencing random Signal 11's on kernels in the 2.4 series with XFree86 4 and SMP configurations. Here a some threads to the XFree86 mailing lists which suggest that the Signal 11's are kernel related. Downgrading to a 2.2 series kernel solves these problems:

http://www.xfree86.org/pipermail/xpert/2001-September/011053.html
http://www.xfree86.org/pipermail/xpert/2001-September/011229.html

Here's a snippet from my posting to the list:

----

Quoted 3 lines

Dell PowerEdge 6300 (Quad Xeon 500) with ATI Rage 128 IBM Netfinity 5600 (Dual PIII 667) with Matrox MMS Quad Monitor Tyan Tunderbolt S1873UANG-R (Dual PIII 600) with Matrox Marvel G400

Quoted 8 lines

I'll bet it goes away if you don't use a 2.4 SMP kernel.
That is, use a 2.4 UP kernel or a 2.2 UP/SMP kernel.
---

And this turned out to be the case. Is there anything that I could do help fix this? Is there anyone else on this list that has had similar problems and has overcome this?

Hello..

I can only admit that i also know this problem.

I run a RH7.1 on a dual-PIII/850 with a Matrox G400/16MB, and i also had several crashes of X, mostly when Netscape runs, but some without it.

What i did:
I changed the default colourdepth from 24 to 16 and i got the "original" mga.o-modules from www.matrox.com.

But this did not help, i suffered a crash some days ago again, but this time i had a logentry, it said:

---------

Sep 12 13:14:27 falcon kernel: [drm] Process 850 dead (ctx 1, d_s =

0x00)
---------

I run XFree 4.0.3 and have enabled the Matrox-Options in the Kernel under "Character devices - Support for Matrox g200/g400", but this did not help either.

Another problem i got by using the modules from "matrox.com", i cannot switch between consoles and X anymore, if i switch back to X several times (one time usually is ok), the whole machine crashes, i have to reboot via SysRq and even that does not work everytime. But this is related to the "mga.o"-module from matrox, i hadnt this effect with the mga.o from XFree86.

Solong..
Frank.

--
Frank Schneider, <[email protected]>.
Microsoft isn't the answer.
Microsoft is the question, and the answer is NO.
... -.-