Linux 2.4.10-ac10
Well, the two notable difference in the syslog are:
1) Parport now reports that it is going to use DMA 7 instead of DMA 3;
2) On the second boot ioport 0x530 is reported not to be free and this prevents ad1816 from loading
Two questions:
1) Is the parport actually configured to use DMA7, not DMA3? Please check using "lspnp -v 0d" and also by any other methods you have access to
2) What is using 0x530? What's in /proc/ioports?
--
Thomas Hood
Quoted 5 lines · Thomas Hood
...
2) On the second boot ioport0x530is reported not to be free and this prevents ad1816 from loading
...
2) What is using0x530? What's in/proc/ioports?
# cat /proc/ioports 0000-001f : dma1 0020-003f : pic1 0040-005f : timer 0060-006f : keyboard 0070-007f : rtc 0080-008f : dma page reg 00a0-00bf : pic2 00c0-00df : dma2 00f0-00ff : fpu 0170-0177 : ide1 01f0-01f7 : ide0 0208-020f : PNP0c02 0213-0213 : isapnp read 02f8-02ff : serial(auto) 0376-0376 : ide1 0378-037a : parport0 03c0-03df : vga+ 03f6-03f6 : ide0 03f8-03ff : serial(auto) 0530-053f : AD1816 Sound 0a79-0a79 : isapnp write 0cf8-0cff : PCI conf1 5000-50ff : VIA Technologies, Inc. VT82C586B ACPI d000-dfff : PCI Bus #01 e000-e00f : VIA Technologies, Inc. Bus Master IDE e000-e007 : ide0 e008-e00f : ide1 e800-e81f : Realtek Semiconductor Co., Ltd. RTL-8029(AS) e800-e81f : ne2k-pci #
Two things that might perhaps have influence:
2.4.10-ac9
...
o Clean up ad1816 resource handling (Arnaldo Carvalho de Melo)
...
How does PnPBIOS work together with CONFIG_ISAPNP in the kernel?
cu
Adrian
Signature · 3 lines
Get my GPG key: finger [email protected] | gpg --import Fingerprint: B29C E71E FE19 6755 5C8A 84D4 99FC EA98 4F12 B400