Skip to contentSkip to conversation

wpa_supplicant on Raspberry Pi 2B

DISCUSSION Edward Vidal 3 participants 3 messages Oct 2, 2015

lore
Share & tools
lore
#0 lore raw

Hello all,I am using a Wi-Pi wireless adapter.
My image has the following packages installed. wpa-supplicant-2.4-r0.cortexa7hf_vfp_vfpv4_neon wpa-supplicant-cli-2.4-r0.cortexa7hf_vfp_vfpv4_neon wpa-supplicant-dev-2.4-r0.cortexa7hf_vfp_vfpv4_neon wpa-supplicant-doc-2.4-r0.cortexa7hf_vfp_vfpv4_neon wpa-supplicant-passphrase-2.4-r0.cortexa7hf_vfp_vfpv4_neon
Do I need any additional packages?
My wired eth0 works okay.
Which document has the most current information on setting up wireless networking?From the information at
http://trac.gateworks.com/wiki/Yocto/Wireless

I modified my /etc/wpa_supplicant.conf as below without success. ctrl_interface=/var/run/wpa_supplicant ctrl_interface_group=0
update_config=1

network={
        scan_ssid=1
        ssid="myssid"
        psk="mypsk"
        proto=WPA
        key_mgmt=WPA-PSK
}Below is the results I get when I run iwconfig.
iwconfig
wlan0     IEEE 802.11bgn  ESSID:off/any
          Mode:Managed  Access Point: Not-Associated   Tx-Power=0 dBm Retry short limit:7   RTS thr:off   Fragment thr:off Encryption key:off
          Power Management:off

lo        no wireless extensions.

eth0      no wireless extensions.
Thanks in advance.  Any help is appreciated.

Edward Vidal Jr. e-mail [email protected] 915-595-1613

#1 lore raw
Quoted 12 lines · Edward Vidal

Hello all,I am using a Wi-Pi wireless adapter.
My image has the following packages installed. wpa-supplicant-2.4-r0.cortexa7hf_vfp_vfpv4_neon wpa-supplicant-cli-2.4-r0.cortexa7hf_vfp_vfpv4_neon wpa-supplicant-dev-2.4-r0.cortexa7hf_vfp_vfpv4_neon wpa-supplicant-doc-2.4-r0.cortexa7hf_vfp_vfpv4_neon wpa-supplicant-passphrase-2.4-r0.cortexa7hf_vfp_vfpv4_neon
Do I need any additional packages?
My wired eth0 works okay.
Which document has the most current information on setting up wireless networking?From the information at
http://trac.gateworks.com/wiki/Yocto/Wireless

Quoted 5 lines

I modified my /etc/wpa_supplicant.conf as below without success. ctrl_interface=/var/run/wpa_supplicant ctrl_interface_group=0
update_config=1

Try modifying /etc/network/interfaces like this:

https://github.com/EttusResearch/meta-ettus/commit/da86e76d116798e386d073a18453aabb6179a09a#diff-063964fa6e41065c7868b13b1b1644eaR11

it seems wireless extensions are deprecated and you should use the nl80211 driver now.

Philip

Quoted 23 lines
network={
        scan_ssid=1
        ssid="myssid"
        psk="mypsk"
        proto=WPA
        key_mgmt=WPA-PSK
}Below is the results I get when I run iwconfig.

iwconfig
wlan0 IEEE 802.11bgn ESSID:off/any
Mode:Managed Access Point: Not-Associated Tx-Power=0 dBm
Retry short limit:7 RTS thr:off Fragment thr:off
Encryption key:off
Power Management:off

lo no wireless extensions.

eth0 no wireless extensions.
Thanks in advance. Any help is appreciated.

Edward Vidal Jr. e-mail [email protected] 915-595-1613

#2 lore raw

What `wpa_cli stat' returns?

Regards,

2015-10-02 11:56 GMT-03:00 Philip Balister <[email protected]>:

Quoted 57 lines · Edward Vidal
Quoted 12 lines

Hello all,I am using a Wi-Pi wireless adapter.
My image has the following packages installed. wpa-supplicant-2.4-r0.cortexa7hf_vfp_vfpv4_neon wpa-supplicant-cli-2.4-r0.cortexa7hf_vfp_vfpv4_neon wpa-supplicant-dev-2.4-r0.cortexa7hf_vfp_vfpv4_neon wpa-supplicant-doc-2.4-r0.cortexa7hf_vfp_vfpv4_neon wpa-supplicant-passphrase-2.4-r0.cortexa7hf_vfp_vfpv4_neon
Do I need any additional packages?
My wired eth0 works okay.
Which document has the most current information on setting up wireless networking?From the information at
http://trac.gateworks.com/wiki/Yocto/Wireless

Quoted 5 lines

I modified my /etc/wpa_supplicant.conf as below without success. ctrl_interface=/var/run/wpa_supplicant ctrl_interface_group=0
update_config=1

Try modifying /etc/network/interfaces like this:

https://github.com/EttusResearch/meta-ettus/commit/da86e76d116798e386d073a18453aabb6179a09a#diff-063964fa6e41065c7868b13b1b1644eaR11

it seems wireless extensions are deprecated and you should use the nl80211 driver now.

Philip

Quoted 14 lines
network={
        scan_ssid=1
        ssid="myssid"
        psk="mypsk"
        proto=WPA
        key_mgmt=WPA-PSK
}Below is the results I get when I run iwconfig.

iwconfig
wlan0 IEEE 802.11bgn ESSID:off/any
Mode:Managed Access Point: Not-Associated Tx-Power=0 dBm
Retry short limit:7 RTS thr:off Fragment thr:off
Encryption key:off
Power Management:off

Quoted 9 lines

lo no wireless extensions.

eth0 no wireless extensions.
Thanks in advance. Any help is appreciated.

Edward Vidal Jr. e-mail [email protected] 915-595-1613

--
_______________________________________________
yocto mailing list
[email protected]
https://lists.yoctoproject.org/listinfo/yocto

Signature · 2 lines
"Do or do not. There is no try"
  Yoda Master