Skip to contentSkip to conversation

2.4.13 and above causes many "Invalidate: Busy Buffer" messages.

DISCUSSION Emiliano Garcia 1 participant 1 message Nov 20, 2001

lore
Share & tools
lore
#0 lore raw

My web server is running software raid 5 on two promise ultra66 cards with an ALi alladin 5 chipset and a k6-2-500 with 300 megs of ram. The setup is 2 20 gig Maxtor 5400 RPM drives and one WD 30 gig 7200 rpm drive.. the raid size is 40 gigs, the chunks are 64kb, and I formated with stride = 16.

I've noticed great improvements in the throughput of my raid with
hdparm -Tt /dev/md0 but now I get "Invalidate: Busy Buffer" hundreds of times showing up in my dmesg. It only happens under heavy disk I/O and I really need to figure out if this is just a warning or causing damage. A dump causes this message to pop up at least 200 times.

Please advise as to what I need to do to help troubleshoot or what the fix is.

Emi.