Old firmware - again af9013 4.65.0 ?!?
Hi there,
in the meantime I've switched over to Arch Linux - you probably appreciate the choice. I did this because of the lean system and a more recent kernel (now 2.6.28 series). After compiling the latest v4l-dvb version, an
$ lsmod | grep af
results to the following:
af9013 21636 1 dvb_usb_af9015 26400 0 dvb_usb 20492 1 dvb_usb_af9015 i2c_core 22804 6 mc44s803,af9013,dvb_usb_af9015,dvb_usb,i2c_nforce2,nvidia usbcore 136848 5 dvb_usb_af9015,dvb_usb,ohci_hcd,ehci_hcd
The correct tuner module seems to be loaded. So far, so good. But dmesg | grep af shows it all:
[..]
af9013: firmware version:4.65.0
usbcore: registered new interface driver dvb_usb_af9015
This is the same when installing no firmware, or installing the file from
http://www.otit.fi/~crope/v4l-dvb/af9015/af9015_firmware_cutter/firmware_files/4.95.0/
into /lib/firmware, which should load 4.95.0 firmware.
What's going wrong?
Quoted 10 lines · [email protected] wrote:
af9013: firmware version:4.65.0
usbcore: registered new interface driverdvb_usb_af9015This is the same when installing no firmware, or installing the file from
http://www.otit.fi/~crope/v4l-dvb/af9015/af9015_firmware_cutter/firmware_files/4.95.0/
into
/lib/firmware, which should load 4.95.0 firmware.What's going wrong?
It (firmware 4.65.0) must be somewhere where it is downloaded to the device. Does it say it is loading fw from file?
firmware: requesting dvb-usb-af9015.fw
dvb-usb: downloading firmware from file 'dvb-usb-af9015.fw'
Run "updatedb" as root and then search where it is lurking by
"locate dvb-usb-af9015.fw". And remember also replug stick, take account that without re-plug it could be even downloaded by old windoze driver.
regards
Antti
Signature · 1 line
http://palosaari.fi/
Quoted 3 lines · Antti
And remember also replug stick, take account
that without re-plug it could be even downloaded by old windoze driver.
That did the trick! Thanks man!