2.5.8-dj1, add five help texts to arch/ppc/Config.help

@@ -315,6 +315,31 @@
   includes a server that supports the frame buffer device directly
   (XF68_FBDev).
 
+CONFIG_VIODASD
+  If you are running on an iSeries system and you want to use
+  virtual disks created and managed by OS/400, say Y.
+
+CONFIG_VIODASD_IDE
+  This causes the iSeries virtual disks to look like IDE disks.
+  If you have programs or utilities that only support certain
+  kinds of disks, this option will cause iSeries virtual disks
+  to pretend to be IDE disks, which may satisfy the program.
+
+CONFIG_VIOCD
+  If you are running Linux on an IBM iSeries system and you want to
+  read a CD drive owned by OS/400, say Y here.
+
+CONFIG_VIOTAPE
+  If you are running Linux on an iSeries system and you want Linux
+  to read and/or write a tape drive owned by OS/400, say Y here.
+
+CONFIG_PMAC_APM_EMU
+  This driver provides an emulated /dev/apm_bios and /proc/apm. The
+  first one is mostly intended for XFree to sleep & wakeup properly,
+  the second one provides some battery information to allow existing
+  APM utilities to work. It provides less useful information than
+  tools specifically designed for PowerBooks or /proc/pmu/battery_x.
+
 CONFIG_SCSI
   If you want to use a SCSI hard disk, SCSI tape drive, SCSI CD-ROM or
   any other SCSI device under Linux, say Y and make sure that you know