New: "can't resubmit intr status -19" when disconnecting USB device

http://bugme.osdl.org/show_bug.cgi?id=565

Summary: "can't resubmit intr status -19" when disconnecting USB
device
Kernel Version: 2.5.67-bk1
Status: NEW
Severity: low
Owner: [email protected]
Submitter: [email protected]

Distribution: Debian Testing

Hardware Environment:
Intel PIIX4, MS Wheelmouse Optical USB

Software Environment:
CONFIG_USB=y
CONFIG_USB_DEVICEFS=y
CONFIG_USB_UHCI_HCD=y
CONFIG_USB_HID=y
CONFIG_USB_HIDINPUT=y

Problem Description:

When disconnecting a USB mouse, I'm seeing this odd error on my console:
drivers/usb/input/hid-core.c: can't resubmit intr, 00:07.2-1/input0, status -19

The entire series of messages, from insert to removal, are:
hub 1-0:0: debounce: port 1: delay 100ms stable 4 status 0x301
hub 1-0:0: new USB device on port 1, assigned address 2
input: USB HID v1.10 Mouse [Microsoft Microsoft 3-Button Mouse with IntelliEye (TM)] on usb-00:07.2-1
<pull out USB cable here>
usb 1-1: USB disconnect, address 2
drivers/usb/input/hid-core.c: can't resubmit intr, 00:07.2-1/input0, status -19

dmesg | grep -i usb:
drivers/usb/core/usb.c: registered new driver usbfs drivers/usb/core/usb.c: registered new driver hub drivers/usb/host/uhci-hcd.c: USB Universal Host Controller Interface driver v2.0 Please use the 'usbfs' filetype instead, the 'usbdevfs' name is deprecated. uhci-hcd 00:07.2: new USB bus registered, assigned bus number 1
hub 1-0:0: USB hub found
drivers/usb/core/usb.c: registered new driver hid drivers/usb/input/hid-core.c: v2.0:USB HID core driver
hub 1-0:0: new USB device on port 1, assigned address 2
input: USB HID v1.10 Mouse [Microsoft Microsoft 3-Button Mouse with IntelliEye (TM)] on usb-00:07.2-1
usb 1-1: USB disconnect, address 2
drivers/usb/input/hid-core.c: can't resubmit intr, 00:07.2-1/input0, status -19

Steps to reproduce:
Insert USB mouse, then remove it from USB port.