Boot from different partitions based on some condition
Hi,
I want to set up for an upgrade of our embedded system, using a special kernel for the upgrade. The standard will be to load the system from mtd3 (kernel), mtd4 (devicetree) and mtd5 (rootfs).
When an update is to take place I want to run the upgrade system from mtd0.
So basically I need to have some sort of telling U-boot that it should launch the upgrade system instead of the standard system.
Any ideas how I set this up?
How to tell u-boot?
How to get u-boot to boot from another partition based on a condition like that?
Regards
Mats mailto:matsmanhav at tele2.se
Hello Mats,
Quoted 9 lines · Mats Jansson
Hi,
I want to set up for an upgrade of our embedded system, using a special kernel for the upgrade. The standard will be to load the system from mtd3 (kernel), mtd4 (devicetree) and mtd5 (rootfs).
When an update is to take place I want to run the upgrade system from mtd0.
Quoted 7 lines
So basically I need to have some sort of telling U-boot that it should launch the upgrade system instead of the standard system.
Any ideas how I set this up?
How to tell u-boot?
How to get u-boot to boot from another partition based on a condition like that?
The easiest way to instruct U-Boot to boot a different system (in your case from a different partition) is to set a U-Boot environment variable from within Linux. Your boot-script in U-Boot should then check this environment variable and boot into your upgrade system.
To do this, there are the envtools [1] found in the U-Boot sources in tools/env/. Alternatively, you can use libubootenv [2] which is a project separate from U-Boot but which archieves the same thing.
Both those packages contain an fw_setenv tool which you can use just like setenv on the U-Boot command-line. The only difference is that fw_setenv automatically saves the environment so you don't need any saveenv like command afterwards.
To make those tools work, you'll need to create a configuration file /etc/fw_env.config which tells the tool where the U-Boot environment is located. The example config [3] contains everything you need to know.
Quoted 3 lines
Regards
Mats mailto:matsmanhav at tele2.se
Hope this helps!
[1]: https://gitlab.denx.de/u-boot/u-boot/tree/master/tools/env
[2]: https://github.com/sbabic/libubootenv
[3]: https://gitlab.denx.de/u-boot/u-boot/blob/master/tools/env/fw_env.config
Signature · 1 line
Harald
Dear Mats,
Quoted 8 lines · In message <[email protected]> you wrote:
I want to set up for an upgrade of our embedded system, using a special kernel for the upgrade. The standard will be to load the system from mtd3 (kernel), mtd4 (devicetree) and mtd5 (rootfs).
When an update is to take place I want to run the upgrade system from mtd0.
Quoted 7 lines
So basically I need to have some sort of telling U-boot that it should launch the upgrade system instead of the standard system.
Any ideas how I set this up?
How to tell u-boot?
How to get u-boot to boot from another partition based on a condition like that?
In addition to Harald's advice you might also want to consider not reinventing the wheel yet agaib, but instead look into [1] where all these issues have already been solved (and tested, with many projects and a zillion devices in the field).
[1] https://sbabic.github.io/swupdate/
Best regards,
Wolfgang Denk
Signature · 5 lines
DENX Software Engineering GmbH, Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
Never underestimate the bandwidth of a station wagon full of tapes.
-- Dr. Warren Jackson, Director, UTCS