ax25 start up scripts
Hi, I have the following in a file called rc.ax25
#!/bin/bash
kissnetd /dev/ptysf /dev/ptyse &
#sleep 10
kissattach /dev/ttyS2 ax0 44.135.97.18 kissattach /dev/ttyS3 ax1 44.135.97.19 kissattach /dev/ttysf ax2 44.135.97.20 kissattach /dev/ttyse ax3 44.135.97.21
/sbin/ifconfig ax0 mtu 236 broadcast 44.135.97.255 up /sbin/ifconfig ax1 mtu 236 broadcast 44.135.97.255 up /sbin/ifconfig ax2 mtu 236 broadcast 44.135.97.255 up /sbin/ifconfig ax3 mtu 236 broadcast 44.135.97.255 up
The script works just fine if I execute it from a consol, but if I call it from rc.local and have it run at start up, ax0 and ax1 are created OK, but not ax2 and ax3.
This problem occurs in other situations too, where the file runs fine when manually started, but not when called at startup. Any ideas please?
Using Mandrake 8.2, with kernel 2.4.18-19
Athalon 1.3 ghz
Barry
Ve3nav/va3wi
Have you tried putting sleep 2 after the first 3 kissataches? I know that was a problem in the past.
Wilson, WJ3G
-----Original Message-----
From: [email protected] [mailto:[email protected]]On Behalf Of Barry
Sent: Friday, July 12, 2002 10:10 PM
To: Linux-Hams
Subject: ax25 start up scripts
Hi, I have the following in a file called rc.ax25
#!/bin/bash
kissnetd /dev/ptysf /dev/ptyse &
#sleep 10
kissattach /dev/ttyS2 ax0 44.135.97.18 kissattach /dev/ttyS3 ax1 44.135.97.19 kissattach /dev/ttysf ax2 44.135.97.20 kissattach /dev/ttyse ax3 44.135.97.21
/sbin/ifconfig ax0 mtu 236 broadcast 44.135.97.255 up /sbin/ifconfig ax1 mtu 236 broadcast 44.135.97.255 up /sbin/ifconfig ax2 mtu 236 broadcast 44.135.97.255 up /sbin/ifconfig ax3 mtu 236 broadcast 44.135.97.255 up
The script works just fine if I execute it from a consol, but if I call it from rc.local and have it run at start up, ax0 and ax1 are created OK, but not ax2 and ax3.
This problem occurs in other situations too, where the file runs fine when manually started, but not when called at startup. Any ideas please?
Using Mandrake 8.2, with kernel 2.4.18-19
Athalon 1.3 ghz
Barry
Ve3nav/va3wi
-
To unsubscribe from this list: send the line "unsubscribe linux-hams" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html