Bluetooth Subsystem PC Card drivers for 2.4.19-rc2
Subsystems (2)
Marcel Holtmann
maintainerPATCH 1/1 Bluetooth Subsystem PC Card drivers for 2.4.19-rc2
Hi Marcelo,
this patch updates the PC Card drivers of the Bluetooth subsystem. It modifies the following files:
linux-2.4.19-rc2/CREDITS
linux-2.4.19-rc2/MAINTAINERS
linux-2.4.19-rc2/Documentation/Configure.help
linux-2.4.19-rc2/drivers/bluetooth/Config.in
linux-2.4.19-rc2/drivers/bluetooth/Makefilelinux-2.4.19-rc2/drivers/bluetooth/bluecard_cs.clinux-2.4.19-rc2/drivers/bluetooth/bt3c_cs.clinux-2.4.19-rc2/drivers/bluetooth/dtl1_cs.c
All three drivers are complete independent and has been tested for a long time. The drivers are stable and ready for the 2.4 kernel.
With these drivers in the final 2.4.19 Kernel, it will be very easy for the Linux users to take a step into the Bluetooth world.
Regards
Marcel
CREDITS +6 -0
@@ -1329,6 +1329,12 @@ S: Provo, Utah 84606-5607 S: USA +N: Marcel Holtmann +E: [email protected] +W: http://www.holtmann.org +D: Author of the Linux Bluetooth Subsystem PC Card drivers +S: Germany + N: Rob W. W. Hooft E: [email protected] D: Shared libs for graphics-tools and for the f2c compiler
Documentation/Configure.help +27 -1
@@ -20494,10 +20494,36 @@ Bluetooth HCI DTL1 (PC Card) driver. This driver provides support for Bluetooth PCMCIA devices with Nokia DTL1 interface: - Nokia Bluetooth PC Card, Socketcom Bluetooth CF module + Nokia Bluetooth Card + Socket Bluetooth CF Card Say Y here to compile support for HCI DTL1 devices into the kernel or say M to compile it as module (dtl1_cs.o). + +HCI BT3C (PC Card) device driver +CONFIG_BLUEZ_HCIBT3C + Bluetooth HCI BT3C (PC Card) driver. + This driver provides support for Bluetooth PCMCIA devices with + 3Com BT3C interface: + 3Com Bluetooth Card (3CRWB6096) + HP Bluetooth Card + + The HCI BT3C driver uses external firmware loader program provided in + the BlueFW package. For more information, see <http://bluez.sf.net>. + + Say Y here to compile support for HCI BT3C devices into the + kernel or say M to compile it as module (bt3c_cs.o). + +HCI BlueCard (PC Card) device driver +CONFIG_BLUEZ_HCIBLUECARD + Bluetooth HCI BlueCard (PC Card) driver. + This driver provides support for Bluetooth PCMCIA devices with + Anycom BlueCard interface: + Anycom Bluetooth PC Card + Anycom Bluetooth CF Card + + Say Y here to compile support for HCI BlueCard devices into the + kernel or say M to compile it as module (bluecard_cs.o). # The following options are for Linux when running on the Hitachi # SuperH family of RISC microprocessors.
MAINTAINERS +6 -0
@@ -266,6 +266,12 @@ W: http://bluez.sf.net S: Maintained +BLUETOOTH SUBSYSTEM (PC Card Drivers) +P: Marcel Holtmann +M: [email protected] +W: http://www.holtmann.org/linux/bluetooth/ +S: Maintained + BTTV VIDEO4LINUX DRIVER P: Gerd Knorr M: [email protected]
drivers/bluetooth/Config.in +4 -0
@@ -14,6 +14,10 @@ dep_tristate 'HCI DTL1 (PC Card) driver' CONFIG_BLUEZ_HCIDTL1 $CONFIG_PCMCIA $CONFIG_BLUEZ +dep_tristate 'HCI BT3C (PC Card) driver' CONFIG_BLUEZ_HCIBT3C $CONFIG_PCMCIA $CONFIG_BLUEZ + +dep_tristate 'HCI BlueCard (PC Card) driver' CONFIG_BLUEZ_HCIBLUECARD $CONFIG_PCMCIA $CONFIG_BLUEZ + dep_tristate 'HCI VHCI (Virtual HCI device) driver' CONFIG_BLUEZ_HCIVHCI $CONFIG_BLUEZ endmenu
drivers/bluetooth/Makefile +2 -0
@@ -14,6 +14,8 @@ uart-$(CONFIG_BLUEZ_HCIUART_H4) += hci_h4.o obj-$(CONFIG_BLUEZ_HCIDTL1) += dtl1_cs.o +obj-$(CONFIG_BLUEZ_HCIBT3C) += bt3c_cs.o +obj-$(CONFIG_BLUEZ_HCIBLUECARD) += bluecard_cs.o include $(TOPDIR)/Rules.make
drivers/bluetooth/bluecard_cs.c +1113 -0
1,113 lines not on this page · raw message
drivers/bluetooth/bt3c_cs.c +946 -0
946 lines not on this page · raw message
drivers/bluetooth/dtl1_cs.c +625 -706
862 lines not on this page · raw message
The rest of this diff is not shown. View the raw message.
Part of the diff is not shown here. View the raw message.