Skip to contentSkip to conversation

Problems with USB driver and Swissonic USB Studio

DISCUSSION John Anderson 2 participants 5 messages Jul 19, 2002

lore
Share & tools
lore
#0 lore raw

I'm using a Swissonic USB Studio.

With an older CVS version (from around 29th June), playback and capture were pretty much OK, except for a ticking (the repetitive peaks issue?) and some noise. Using the latest CVS version:

aplay -D studio /mnt/spare/music/test.wav
Playing WAVE '/mnt/spare/music/test.wav' : Signed 16 bit Little Endian, Rate 44100 Hz, Stereo
aplay: set_params:737: Broken configuration for this PCM: no configurations available

ecasound and jackd die with less descriptive error messages.

The error comes from a call

err = snd_pcm_hw_params_any(handle, params);

on line 735 of aplay.c

The output from /proc/asound/card1/stream0 is

Creative Technology Ltd Creative USB Speaker : USB Audio

Playback:
Status: Stop
Altset 1
Format: U8
Channels: 1
Endpoint: 4 OUT (ADAPTIVE)
Rates: 4990 - 55010 (continous)
Altset 2
Format: U8
Channels: 2
Endpoint: 4 OUT (ADAPTIVE)
Rates: 4990 - 55010 (continous)
Altset 3

    Format: S16_LE
    Channels: 1
    Endpoint: 4 OUT (ADAPTIVE)
    Rates: 4990 - 55010 (continous)
  Altset 4
    Format: S16_LE
    Channels: 2
    Endpoint: 4 OUT (ADAPTIVE)
    Rates: 4990 - 55010 (continous)

Altset 5
Format: STD
Channels: 1
Endpoint: 4 OUT (ADAPTIVE)
Rates: 4990 - 55010 (continous)
Altset 6
Format: STD
Channels: 2
Endpoint: 4 OUT (ADAPTIVE)
Rates: 4990 - 55010 (continous)

Capture:
Status: Stop
Altset 1
Format: U8
Channels: 1
Endpoint: 5 IN (ASYNC)
Rates: 4000, 5512, 6000, 8000, 11025, 12000, 16000, 22050, 24000, 32000, 44100, 48000
Altset 2
Format: U8
Channels: 2
Endpoint: 5 IN (ASYNC)
Rates: 4000, 5512, 6000, 8000, 11025, 12000, 16000, 22050, 24000, 32000, 44100, 48000
Altset 3

    Format: S16_LE
    Channels: 1
    Endpoint: 5 IN (ASYNC)
    Rates: 4000, 5512, 6000, 8000, 11025, 12000, 16000, 22050, 24000, 32000, 44100, 48000
  Altset 4
    Format: S16_LE
    Channels: 2
    Endpoint: 5 IN (ASYNC)
    Rates: 4000, 5512, 6000, 8000, 11025, 12000, 16000, 22050, 24000, 32000, 44100, 48000

Altset 5
Format: STD
Channels: 1
Endpoint: 5 IN (ASYNC)
Rates: 4000, 5512, 6000, 8000, 11025, 12000, 16000, 22050, 24000, 32000, 44100, 48000
Altset 6
Format: STD
Channels: 2
Endpoint: 5 IN (ASYNC)
Rates: 4000, 5512, 6000, 8000, 11025, 12000, 16000, 22050, 24000, 32000, 44100, 48000

Any help much appreciated.

BTW, what does Format: STD mean?

bye
John

Signature · 9 lines
Freelance DataDreamer http://www.semiosix.com
Good Things require a precise lack of control



-------------------------------------------------------
This sf.net email is sponsored by:ThinkGeek
Welcome to geek heaven.
http://thinkgeek.com/sf
#1 lore raw

At 19 Jul 2002 12:20:21 +0200,

Quoted 10 lines · John Anderson

I'm using a Swissonic USB Studio.

With an older CVS version (from around 29th June), playback and capture were pretty much OK, except for a ticking (the repetitive peaks issue?) and some noise. Using the latest CVS version:

aplay -D studio /mnt/spare/music/test.wav
Playing WAVE '/mnt/spare/music/test.wav' : Signed 16 bit Little Endian, Rate 44100 Hz, Stereo
aplay: set_params:737: Broken configuration for this PCM: no configurations available

perhaps you'll need to update also alsa-lib from cvs. applications are not necessarily rebuilt, though.

Takashi

-------------------------------------------------------
This sf.net email is sponsored by:ThinkGeek
Welcome to geek heaven.
http://thinkgeek.com/sf

#2 lore raw
Quoted 8 lines · Takashi Iwai
Quoted 7 lines · John Anderson

I'm using a Swissonic USB Studio.

With an older CVS version (from around 29th June), playback and capture were pretty much OK, except for a ticking (the repetitive peaks issue?) and some noise. Using the latest CVS version:

Quoted 5 lines
Quoted 3 lines

aplay -D studio /mnt/spare/music/test.wav
Playing WAVE '/mnt/spare/music/test.wav' : Signed 16 bit Little Endian, Rate 44100 Hz, Stereo
aplay: set_params:737: Broken configuration for this PCM: no configurations available

perhaps you'll need to update also alsa-lib from cvs.

Did that already.

Quoted 1 line

applications are not necessarily rebuilt, though.

Did that too.

Anything else obvious that I might have missed?

bye
John

Signature · 9 lines
Freelance DataDreamer http://www.semiosix.com
Good Things require a precise lack of control



-------------------------------------------------------
This sf.net email is sponsored by:ThinkGeek
Welcome to geek heaven.
http://thinkgeek.com/sf
#3 lore raw

At 19 Jul 2002 12:54:38 +0200,

Quoted 10 lines · John Anderson
Quoted 8 lines · Takashi Iwai
Quoted 7 lines · John Anderson

I'm using a Swissonic USB Studio.

With an older CVS version (from around 29th June), playback and capture were pretty much OK, except for a ticking (the repetitive peaks issue?) and some noise. Using the latest CVS version:

Quoted 7 lines
Quoted 5 lines
Quoted 3 lines

aplay -D studio /mnt/spare/music/test.wav
Playing WAVE '/mnt/spare/music/test.wav' : Signed 16 bit Little Endian, Rate 44100 Hz, Stereo
aplay: set_params:737: Broken configuration for this PCM: no configurations available

perhaps you'll need to update also alsa-lib from cvs.

Did that already.

hmm, do you see any kernel messages from alsa drivers? (you might need to compile it via --with-debug=full option.) if there is a message regarding unknown ioctl, then the alsa-library doesn't match with the alsa driver. something wrong happened during alsa-lib installation, such as wrong path, etc.

Takashi

-------------------------------------------------------
This sf.net email is sponsored by:ThinkGeek
Welcome to geek heaven.
http://thinkgeek.com/sf

#4 lore raw
Quoted 5 lines · Takashi Iwai

hmm, do you see any kernel messages from alsa drivers? (you might need to compile it via --with-debug=full option.) if there is a message regarding unknown ioctl, then the alsa-library doesn't match with the alsa driver. something wrong happened during alsa-lib installation, such as wrong path, etc.

I did the configure dance for the drivers, with the debug switch. Recompiled, installed, and did rmmod -r. The '-r' was the obvious bit I forgot last time. Duh.

It works now. Thanks for your help.

bye
John

Signature · 9 lines
Freelance DataDreamer http://www.semiosix.com
Good Things require a precise lack of control



-------------------------------------------------------
This sf.net email is sponsored by:ThinkGeek
Welcome to geek heaven.
http://thinkgeek.com/sf