Skip to contentSkip to conversation

Problems with AMD 768 IDE support

DISCUSSION Ernst Lehmann 5 participants 6 messages Jul 22, 2002 – Jul 28, 2002

lore
Share & tools
lore
#0 lore raw

Hi,

I have here a Dual-Athlon Box, with a AMD760MPX Chipset and AMD768 IDE.

In the base 2.4.18 kernel there seems to be no support for the IDE-Chipset

So I tried 2.4.19-rc3-ac1 and I got more APIC errors, than I can count :))

So my question.

Does anybody know where to find a patch for the IDE-Support to the plain 2.4.18 kernel,

or which version of the 2.4.19-rc<x>-ac<x> is stable enough at the moment to run such a box.

TIA for any help...

Signature · 5 lines
Bye

	Ernst
---------
Ernst Lehmann             Email: [email protected]
#1 lore raw
Quoted 6 lines · Ernst Lehmann

Hi,

I have here a Dual-Athlon Box, with a AMD760MPX Chipset and AMD768 IDE.

In the base 2.4.18 kernel there seems to be no support for the IDE-Chipset

It is supposed to be 'standard'. If you enable:

CONFIG_IDE=y
CONFIG_BLK_DEV_MODES=y
CONFIG_BLK_DEV_HD=y
... it should work. The amd74xx was seperate, it was a "Viper" chip-set. I believe that the newer AMD Chip-Sets are generic.

Cheers,
Dick Johnson
Penguin : Linux version 2.4.18 on an i686 machine (797.90 BogoMips). The US military has given us many words, FUBAR, SNAFU, now ENRON. Yes, top management were graduates of West Point and Annapolis.

#2 lore raw
Quoted 7 lines · Richard B. Johnson
Quoted 5 lines · Ernst Lehmann

Hi,
I have here a Dual-Athlon Box, with a AMD760MPX Chipset and AMD768 IDE.

In the base 2.4.18 kernel there seems to be no support for the IDE-Chipset

Quoted 7 lines

It is supposed to be 'standard'. If you enable:

CONFIG_IDE=y
CONFIG_BLK_DEV_MODES=y
CONFIG_BLK_DEV_HD=y
... it should work. The amd74xx was seperate, it was a "Viper" chip-set. I believe that the newer AMD Chip-Sets are generic.

They are not generic, although they are fairly similar. You need the -ac tree right now for the 760MP/MPX IDE, although the port wont be hard

#3 lore raw
In reply to Ernst Lehmann
Quoted 2 lines · Ernst Lehmann

Does anybody know where to find a patch for the IDE-Support to the plain 2.4.18 kernel,

Pending for 2.4.20

For -ac we are chasing some bugs in the Summit support. 2.4.19-rc1-3 should you fine. The summit fix stuff is waiting until either I or more likely the IBM guys looking at it figure out what broke. Its important enough I've left it in broken for some boards until found.

#4 lore raw
In reply to Ernst Lehmann
Quoted 12 lines · Ernst Lehmann

Hi,

I have here a Dual-Athlon Box, with a AMD760MPX Chipset and AMD768 IDE.

In the base 2.4.18 kernel there seems to be no support for the IDE-Chipset

So I tried 2.4.19-rc3-ac1 and I got more APIC errors, than I can count :))

So my question.

Quoted 7 lines

Does anybody know where to find a patch for the IDE-Support to the plain 2.4.18 kernel,

or which version of the 2.4.19-rc<x>-ac<x> is stable enough at the moment to run such a box.

TIA for any help...

I've got two of these machines running with 2.4.19-rc2 at the moment; no APIC errors you speak of. Before, they were running 2.4.19-pre9-ac2, also with no APIC errors. Perhaps you have a hardware problem?

Kelsey Hudson [email protected]
Software Engineer/UNIX Systems Administrator
Compendium Technologies, Inc (619) 725-0771
---------------------------------------------------------------------------

#5 lore raw
In reply to Ernst Lehmann
Quoted 4 lines · Ernst Lehmann

I have here a Dual-Athlon Box, with a AMD760MPX Chipset and AMD768 IDE. In the base 2.4.18 kernel there seems to be no support for the IDE-Chipset

I have Tyan Tiger MPX (AMD768) working just fine with my patch set. However, it currently has only single CPU. Patch is for 2.4.19-pre7.

http://uworld.dyndns.org/projects/linux/

- Jussi Laako

Signature · 2 lines
PGP key fingerprint: 161D 6FED 6A92 39E2 EB5B  39DD A4DE 63EB C216 1E4B
Available at PGP keyservers