Skip to contentSkip to conversation

HDSP advanced routing (matrix mixer)

DISCUSSION Thomas Charbonnel 2 participants 2 messages Sep 6, 2002

lore
Share & tools
lore
#0 lore raw

I'm considering writing an application to control the HDSP matrix mixer, but so far I could only figure out how to route physical inputs to the line out (First integer value (0-25) : input, second integer value (26-27) : line out L-R, third integer value (0-65536) : gain). Paul, could you please document a little the channel-to-output, channel-to-line-out, and input-to-output cases ?

Thomas

-------------------------------------------------------
This sf.net email is sponsored by: OSDN - Tired of that same old cell phone? Get a new here for FREE!
https://www.inphonic.com/r.asp?r=sourceforge1&refcode1=vs3390

#1 lore raw
Quoted 6 lines

I'm considering writing an application to control the HDSP matrix mixer, but so far I could only figure out how to route physical inputs to the line out (First integer value (0-25) : input, second integer value (26-27) : line out L-R, third integer value (0-65536) : gain). Paul, could you please document a little the channel-to-output, channel-to-line-out, and input-to-output cases ?

first value: input source
second value: output source
third value: gain

input source: 0-25 (physical channels), 26-51 (audio output streams) output source: 0-27 (physical channels)

output channels 26 and 27 are the two line outs on the I/O box.

i hope this is clearer. let me know if you have more questions.

--p

-------------------------------------------------------
This sf.net email is sponsored by: OSDN - Tired of that same old cell phone? Get a new here for FREE!
https://www.inphonic.com/r.asp?r=sourceforge1&refcode1=vs3390