Skip to contentSkip to conversation

Wake-on-LAN/PCI Linux support

DISCUSSION Felipe Alfaro Solana 2 participants 2 messages Sep 10, 2002

lore
Share & tools
lore
#0 lore raw

Hello,

Does Linux currently support Wake-on-LAN/PCI? I have a 3Com 3c905 TX-M NIC which supports wake-on-LAN and wake-on-PCI. On Windows XP, I have configured the system so that I can use "ether-wake" to wake up my system from standby/hibernation remotely through the network.

This even works when I shutdown the machine from Windows XP. It seems that shutting down from Windows XP does not totally disable power from the computer. I think the computer must be in a deep standby mode cause the NIC is working and listening on the network. In fact, when shutting down XP, the switch port for my NIC card shows the card is listening. If I use "ether-wake", the computer powers up and starts booting up.

However, when I shut down linux by using "init 0", the system gets totally shut down, including the NIC. The switch port for the NIC shows the card is not mantaining the link and thus, "ether-wake" is totally useless.

I would like to see similar support on Linux.

Sincerely,

Felipe Alfaro

#1 lore raw
Quoted 3 lines · Felipe Alfaro Solana

Hello,

Does Linux currently support Wake-on-LAN/PCI?

yes, use 'ethtool' to enable/configure wake-on support

Quoted 2 lines

I have a 3Com 3c905 TX-M
NIC which supports wake-on-LAN and wake-on-PCI.

for 3c59x specifically, it does not (yet) implement WOL support in the driver