Skip to contentSkip to conversation

iptables and permits ports

DISCUSSION Mohamed Nassih 3 participants 3 messages Sep 11, 2002 – Sep 12, 2002

lore
Share & tools
lore
#0 lore raw

Hi,

my firewall file is like below, It is work without any
problem, today I test to connect to a oracle server via the internet from inside to the port 1521(in outside oracle server), and it is work.

Normaly as you can see from the roles I drop all paquets
that do not have as a distination-port www,ftp..the firewall must drop all paquets with the port-destination 1521!!
Can I have please explanation of this..

The firewall file :

/sbin/modprobe iptables iptable_nat
/sbin/modprobe ip_conntrack_ftp
/sbin/modprobe ip_nat_irc
/sbin/modprobe iptable_filter

if [ -e /proc/sys/net/ipv4/conf/all/rp_filter ] then
for filtre in /proc/sys/net/ipv4/conf/*/rp_filter do
echo 1 > $filtre
done
fi

echo 1 > /proc/sys/net/ipv4/icmp_echo_ignore_all echo 1 > /proc/sys/net/ipv4/icmp_echo_ignore_broadcasts

iptables -F
iptables -X

iptables -t nat -A POSTROUTING -o eth0 -s 10.154.17.0/24 -j MASQUERADE

iptables -A INPUT -i eth0 -s 199.243.181.226 -j DROP

iptables -A INPUT -i eth1 -s ! 10.154.17.0/24 -j DROP iptables -A INPUT -i eth0 -p tcp ! --syn -m state --state NEW -j DROP

iptables -A INPUT -i lo -j ACCEPT
iptables -A OUTPUT -o lo -j ACCEPT

iptables -A INPUT -m state --state ESTABLISHED,RELATED -j ACCEPT

iptables -A INPUT -i eth1 -p tcp --destination-port www -j ACCEPT
iptables -A INPUT -i eth1 -p tcp --destination-port ftp -j ACCEPT
iptables -A INPUT -i eth1 -p tcp --destination-port ftp- data -j ACCEPT
iptables -A INPUT -i eth1 -p tcp --destination-port smtp -j ACCEPT
iptables -A INPUT -i eth1 -p tcp --destination-port 110 -j ACCEPT
iptables -A INPUT -i eth1 -d 198.235.216.131 -p udp -- destination-port domain -j ACCEPT
iptables -A INPUT -i eth1 -d 198.235.216.131 -p tcp -- destination-port domain -j ACCEPT
iptables -A INPUT -i eth1 -d 198.235.216.130 -p udp -- destination-port domain -j ACCEPT
iptables -A INPUT -i eth1 -d 198.235.216.130 -p tcp -- destination-port domain -j ACCEPT

iptables -A INPUT -i eth0 -p tcp --destination-port www -j ACCEPT
iptables -A INPUT -i eth0 -p tcp --destination-port ftp -j ACCEPT
iptables -A INPUT -i eth0 -p tcp --destination-port ftp- data -j ACCEPT
iptables -A INPUT -i eth0 -p tcp --destination-port smtp -j ACCEPT
#iptables -A INPUT -i eth0 -p tcp --destination-port 110 -j ACCEPT

iptables -A INPUT -p tcp --dport 113 -j REJECT --reject- with tcp-reset

iptables -A INPUT -j DROP

Thanks in advance.
______________________________________________________
Boîte aux lettres - Caramail - http://www.caramail.com

#1 lore raw
Quoted 6 lines · Mohamed Nassih

Hi,

my firewall file is like below, It is work without any
problem, today I test to connect to a oracle server via the internet from inside to the port 1521(in outside oracle server), and it is work.

Can I have please explanation of this..

Yes. You say that you connect from the "inside". I assume that
you hereby mean a machine located behind the firewall on the lan, and has to go through the firewall in order to connect to the internet.

If this is correct, the you can connect because you have no FORWARD rules. The packet is masqueraded perfectly, and all replys to the connection is routed without problem the the machine on the lan. You should read: http://www.netfilter.org/documentation/tutorials/blueflux/,
and understand how packets traverse the chains.

The INPUT and OUTPUT are only for packets for the server itself and for packets originating from the server itself.

Quoted 56 lines

The firewall file :

/sbin/modprobe iptables iptable_nat /sbin/modprobe ip_conntrack_ftp /sbin/modprobe ip_nat_irc
/sbin/modprobe iptable_filter

if [ -e /proc/sys/net/ipv4/conf/all/rp_filter ]
then
for filtre in /proc/sys/net/ipv4/conf/*/rp_filter
do
echo 1 > $filtre
done
fi

echo 1 > /proc/sys/net/ipv4/icmp_echo_ignore_all echo 1 > /proc/sys/net/ipv4/icmp_echo_ignore_broadcasts

iptables -F
iptables -X

iptables -t nat -A POSTROUTING -o eth0 -s 10.154.17.0/24 -j MASQUERADE

iptables -A INPUT -i eth0 -s 199.243.181.226 -j DROP

iptables -A INPUT -i eth1 -s ! 10.154.17.0/24 -j DROP iptables -A INPUT -i eth0 -p tcp ! --syn -m state --state NEW -j DROP

iptables -A INPUT -i lo -j ACCEPT
iptables -A OUTPUT -o lo -j ACCEPT

iptables -A INPUT -m state --state ESTABLISHED,RELATED -j ACCEPT

iptables -A INPUT -i eth1 -p tcp --destination-port www -j ACCEPT iptables -A INPUT -i eth1 -p tcp --destination-port ftp -j ACCEPT iptables -A INPUT -i eth1 -p tcp --destination-port ftp- data -j ACCEPT
iptables -A INPUT -i eth1 -p tcp --destination-port smtp -j ACCEPT iptables -A INPUT -i eth1 -p tcp --destination-port 110 -j ACCEPT iptables -A INPUT -i eth1 -d 198.235.216.131 -p udp -- destination-port domain -j ACCEPT
iptables -A INPUT -i eth1 -d 198.235.216.131 -p tcp -- destination-port domain -j ACCEPT
iptables -A INPUT -i eth1 -d 198.235.216.130 -p udp -- destination-port domain -j ACCEPT
iptables -A INPUT -i eth1 -d 198.235.216.130 -p tcp -- destination-port domain -j ACCEPT

iptables -A INPUT -i eth0 -p tcp --destination-port www -j ACCEPT iptables -A INPUT -i eth0 -p tcp --destination-port ftp -j ACCEPT iptables -A INPUT -i eth0 -p tcp --destination-port ftp- data -j ACCEPT
iptables -A INPUT -i eth0 -p tcp --destination-port smtp -j ACCEPT #iptables -A INPUT -i eth0 -p tcp --destination-port 110 -j ACCEPT

Quoted 6 lines

iptables -A INPUT -p tcp --dport 113 -j REJECT --reject- with tcp-reset

iptables -A INPUT -j DROP

Thanks in advance.

I strongly advice your to start your script with these three commands:
iptables -P INPUT DROP
iptables -P FORWARD DROP
iptables -P OUTPUT DROP

This sets the default policy on all filter chains, meaning that if no rule matched the packet, the packet is dropped.

Beware. When you do this, no users on the lan can access the internet,
and the firewall cannot communicate with any other machines, because you only accept packets to the loopback interface.

Regards
Anders Fugmann

Signature · 3 lines
Author of FIAIF
FIAIF Is An Intelligent/Iptables Firewall
http://fiaif.fugmann.dhs.org
#2 lore raw
In reply to Mohamed Nassih
Quoted 7 lines · Mohamed Nassih

Hi,

my firewall file is like below, It is work without any
problem, today I test to connect to a oracle server via the internet from inside to the port 1521(in outside oracle server), and it is work.

Quoted 5 lines

Normaly as you can see from the roles I drop all paquets
that do not have as a distination-port www,ftp..the firewall must drop all paquets with the port-destination 1521!!
Can I have please explanation of this..

I don't know whether by "inside" you mean some machine on your LAN (not your firewall), or the firewall itself, however:

You have no FORWARDing rules whatsoever, so if you're sending packets from your internal LAN, everything is allowed by the default ACCEPT policy (which you haven't changed).

You have no OUTPUT policy either, so if you're sending packets from the firewall itself, everything is allowed by the default ACCEPT policy (which you haven't changed).

Antony.

Signature · 5 lines
All matter in the Universe can be placed into one of two categories:

1. things which need to be fixed
2. things which will need to be fixed once you've had a few minutes to play 
with them