Skip to contentSkip to conversation

Hints on configuring EGPIO on cs46xx

DISCUSSION Peter Good 2 participants 2 messages Sep 26, 2002

lore
Share & tools
lore

Peter Good

author
#0 lore raw

I've just tried the CVS, and am having a little trouble configuring a Hercules Game Theater XP. I've got the modules installed, cs46 comes up correctly, and I do get sound, but it's doing what was referred to in the other thread about this module. Sound is flat, no bass or anything. I'm not really sure on how to set the EGPIO, have had a play with it, but can't seem to resolve the problem.

Anyone got any useful hints on how to actually set cs46xx up for a Gametheater, using optical out?

Thanks in advance.
Peter

Signature · 4 lines
-------------------------------------------------------
This sf.net email is sponsored by:ThinkGeek
Welcome to geek heaven.
http://thinkgeek.com/sf
#1 lore raw
Quoted 8 lines

I've just tried the CVS, and am having a little trouble configuring a Hercules Game Theater XP. I've got the modules installed, cs46 comes up correctly, and I do get sound, but it's doing what was referred to in the other thread about this module. Sound is flat, no bass or anything. I'm not really sure on how to set the EGPIO, have had a play with it, but can't seem to resolve the problem.

Quoted 4 lines

Anyone got any useful hints on how to actually set cs46xx up for a Gametheater, using optical out?

I've got a Hercules Game Theater XP,what's known for moment is that: EGPIO0 selects the SPDIF input, the EPGIO2 turn on the Amplifier, and that's implemented in the current driver.
With the Game Theater XP, the Amplifier is turned on all the time, with the exception if you unmute the CD in the mixer, (this is for all cs46xx cards). Dont known why it's done in this way, probably with a good reason in mind, i've just complained about that piece of, not touched it (yet).
If the sound card amplifier is turned off for some reason the sound gets somewhat lower, bad and distorcionated, about the "flat bass", I have not experienced that. I daily use the HeadPhones, and I got my the SPDIF output connected to the receiver. To activate the SPDIF it should only be to unmute the "IEC 958 Output" in the mixer, no GPIO's are involved on the Game Theater card.

About the SPDIF output the analog parts of the soundcard should not matter at all, it's like whatever what you playback will be sent directly "as it is sampled" to the SPDIF output, it's up to the Stereo reciever (or whatever you got ...) to do the DAC stuff.

/Benny
/Benny

-------------------------------------------------------
This sf.net email is sponsored by:ThinkGeek
Welcome to geek heaven.
http://thinkgeek.com/sf