Skip to contentSkip to conversation

Edirol PCR-50 keyboard with ALSA USB MIDI

DISCUSSION Josh Green 1 participant 2 messages Jan 2, 2003

lore
Share & tools
lore

Josh Green

author
#0 lore raw

I sent an email to alsa-user about this issue a few days ago, but now I've delved into the problem a little more and believe it to be a bug (rather than user error :)

I'm having some troubles getting my Edirol PCR-50 keyboard working via USB with my laptop. I'm using latest CVS of ALSA (as of December 28 2002) and stock linux-2.4.20 on a Mandrake 9.0 system. The keyboard is detected and the snd-usb-audio module hotplugs itself, but I'm not getting any data via the raw MIDI port or sequencer ports. Here is the output from /var/log/messages when plugging the device:

Dec 29 19:39:44 SillyPuddy kernel: hub.c: new USB device 00:07.2-1.3,
assigned address 4
Dec 29 19:39:44 SillyPuddy kernel: usb.c: USB device 4 (vend/prod
0x582/0x33) is not claimed by any active driver.
Dec 29 19:39:47 SillyPuddy /etc/hotplug/usb.agent: Setup snd-usb-audio
for USB product 582/33/100
Dec 29 19:39:47 SillyPuddy kernel: usb.c: registered new driver
snd-usb-audio
Dec 29 19:39:47 SillyPuddy kernel: snd-usb-midi: created 2 output and 3
input ports
Dec 29 19:39:47 SillyPuddy kernel: usb-uhci.c: uhci_submit_urb: pipesize
for pipe 40008480 is zero
Dec 29 19:39:47 SillyPuddy kernel: snd-usb-midi: usb_submit_urb: -90

The last 2 log lines I believe are significant. Looking at the code I found that the usb_maxpacket macro is returning 0 for the input endpoint for the PCR USB device which causes uhci_submit_urb to fail (-90 = EMSGSIZE which probably isn't really the right code, EINVAL maybe). I couldn't figure out if this size was set by ALSA or supplied by the device info or something, and since its a bit over my head, I decided to post this here. I hope someone has a better idea of whats going on.

Some more info:

/proc/asound/cards:

0 [PCR ]: USB-Audio - EDIROL PCR
Roland EDIROL PCR

cat /proc/asound/PCR/midi0:

Roland EDIROL PCR

Output 0
Tx bytes : 0
Output 1
Tx bytes : 0
Input 0
Rx bytes : 0
Input 1
Rx bytes : 0
Input 2
Rx bytes : 0

I've also attached lsusb -v output. Cheers.
Josh Green

Bus 001 Device 001: ID 0000:0000
Bus 001 Device 002: ID 05e3:0604 Genesys Logic, Inc. Bus 001 Device 006: ID 0582:0033 Roland Corp.

author
#1 lore raw
Quoted 2 lines · Josh Green

I've also attached lsusb -v output. Cheers.

Ooops, looks like lsusb without -v instead.. Should look before I attach. Let me know if that or any other information would be helpful. Cheers.
Josh Green

Quoted 3 lines

Bus 001 Device 001: ID 0000:0000
Bus 001 Device 002: ID 05e3:0604 Genesys Logic, Inc. Bus 001 Device 006: ID 0582:0033 Roland Corp.

-------------------------------------------------------
This sf.net email is sponsored by:ThinkGeek
Welcome to geek heaven.
http://thinkgeek.com/sf