Skip to contentSkip to conversation

PCI resource conflicts in recent 2.4 kernels

Problem Mace Moneta 2 participants 4 messages Jan 19, 2003 – Jan 21, 2003 PCI

lore
Share & tools
lore
#0 lore raw

I'm running Redhat 8.0 on a docked Toshiba Tecra 730CDT (Pentium 150MHz, 80MB RAM), and recently tried to upgrade my kernel to one of their errata kernels. When I did, I got PCI resource conflicts, and the SCSI devices are unable to initialize. Partitions are not mounted, so the boot fails. I confirmed that the problem also occurs with the latest (2.4.21-pre3) vanilla kernel. Originally reported to Redhat:
https://bugzilla.redhat.com/bugzilla/show_bug.cgi?id=76159

I was unable to find any similar report via google searches, but there are a couple of recent similar reports in the Redhat buzilla (bugs 78035 and 76428).

===================
Last Working kernel
===================

2.4.18-14 (Redhat)

===========
Failed boot
===========

Following copied by hand:

PCI: Cannot allocate resource region 0 of device 01:04.0
PCI: Cannot allocate resource region 0 of device 01:08.0
PCI: Cannot allocate resource region 0 of device 01:0c.0
PCI: Cannot allocate resource region 1 of device 01:0c.0
PCI: Failed to allocate resource 0(0-fff) for 01:01.0
PCI: Failed to allocate resource 0(0-fff) for 01:01.1
PCI: Failed to allocate resource 0(0-7f) for 01:04.0
PCI: Failed to allocate resource 0(0-7) for 01:08.0
PCI: Failed to allocate resource 0(0-ff) for 01:0c.0
PCI: Failed to allocate resource 1(0-fff) for 01:0c.0 Loading aic7xxx module
PCI: Device 01:08.0 not available because of resource collisions
PCI: Device 01:0c.0 not available because of resource collisions /lib/aic7xxx.o init_module
Error: /bin/insmod exited abnormally!
Loading tmscsim module
PCI: Device 01:04.0 not available because of resource collisions /lib/tmscsim.o init_module
Error: /bin/insmod exited abnormally!

====================
Normal boot messages
====================

PCI: PCI BIOS revision 2.10 entry at 0xfd4ae, last bus=21
PCI: Using configuration type 1
PCI: Probing PCI hardware
Unknown bridge resource 0: assuming transparent Unknown bridge resource 1: assuming transparent Unknown bridge resource 2: assuming transparent

===========================================
lspci -vvv on the (good) 2.4.18-14 kernel
===========================================

00:00.0 Host bridge: Toshiba America Info Systems 601 (rev 11)
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort+ >SERR- <PERR-
Latency: 0, cache line size 08

00:02.0 CardBus bridge: Toshiba America Info Systems ToPIC95 (rev 07)
Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=slow >TAbort- <TAbort-
<MAbort- >SERR- <PERR-

        Latency: 0
        Interrupt: pin A routed to IRQ 11
        Region 0: Memory at 10000000 (32-bit, non-prefetchable) [disabled] [size=4K]
        Bus: primary=00, secondary=14, subordinate=14, sec-latency=0
        Memory window 0: 00000000-00000000 [disabled]
        Memory window 1: 00000000-00000000 [disabled]
        I/O window 0: 00000000-00000003 [disabled]
        I/O window 1: 00000000-00000003 [disabled]
        BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset- 16bInt- PostWrite-

00:02.1 CardBus bridge: Toshiba America Info Systems ToPIC95 (rev 07)
Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr-DEVSEL=slow >TAbort- <TAbort-
<MAbort- >SERR- <PERR-

        Latency: 0
        Interrupt: pin B routed to IRQ 11
        Region 0: Memory at 10001000 (32-bit, non-prefetchable) [disabled] [size=4K]
        Bus: primary=00, secondary=15, subordinate=15, sec-latency=0
        Memory window 0: 00000000-00000000 [disabled]
        Memory window 1: 00000000-00000000 [disabled]
        I/O window 0: 00000000-00000003 [disabled]
        I/O window 1: 00000000-00000003 [disabled]
        BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset- 16bInt- PostWrite-

00:03.0 ISA bridge: Toshiba America Info Systems: Unknown device 0606 (rev 02)
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-

00:04.0 VGA compatible controller: Chips and Technologies F65550 (rev 05) (prog-if 00 [VGA])
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping+ SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Region 0: Memory at fe000000 (32-bit, non-prefetchable) [size=16M] Expansion ROM at <unassigned> [disabled] [size=256K]

00:06.0 PCI bridge: Toshiba America Info Systems: Unknown device 0605 (rev 04) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=slow >TAbort- <TAbort-
<MAbort- >SERR- <PERR-

        Latency: 0
        Bus: primary=00, secondary=01, subordinate=13, sec-latency=0
        I/O behind bridge: 00000000-00000fff
        Memory behind bridge: 00000000-000fffff
        Prefetchable memory behind bridge: 00000000-000fffff
        BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-

01:01.0 CardBus bridge: Toshiba America Info Systems ToPIC95 PCI to CardBus Bridge for Notebooks (rev 04)
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=slow >TAbort- <TAbort-
<MAbort- >SERR- <PERR-

        Region 0: Memory at 10002000 (32-bit, non-prefetchable) [size=4K]
        Bus: primary=01, secondary=12, subordinate=12, sec-latency=0
        Memory window 0: 00000000-00000000
        Memory window 1: 00000000-00000000
        I/O window 0: 00000000-00000003
        I/O window 1: 00000000-00000003
        BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset- 16bInt- PostWrite-

01:01.1 CardBus bridge: Toshiba America Info Systems ToPIC95 PCI to CardBus Bridge for Notebooks (rev 04)
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=slow >TAbort- <TAbort-
<MAbort- >SERR- <PERR-

        Region 0: Memory at 10003000 (32-bit, non-prefetchable) [size=4K]
        Bus: primary=01, secondary=13, subordinate=13, sec-latency=0
        Memory window 0: 00000000-00000000
        Memory window 1: 00000000-00000000
        I/O window 0: 00000000-00000003
        I/O window 1: 00000000-00000003
        BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset- 16bInt- PostWrite-

01:04.0 SCSI storage controller: Advanced Micro Devices [AMD] 53c974 [PCscsi] (rev 10)
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+
Stepping+ SERR+ FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-

        Latency: 64 (1000ns min, 10000ns max)
        Interrupt: pin A routed to IRQ 11
        Region 0: I/O ports at ff80 [size=128]

01:08.0 Serial controller: Siig Inc CyberSerial (1-port) 16550 (prog-if 02 [16550])
Subsystem: Siig Inc CyberSerial (1-port) 16550
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Interrupt: pin A routed to IRQ 11
Region 0: I/O ports at ff78 [size=8]
Capabilities: [a0] Power Management version 1
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-

01:0c.0 SCSI storage controller: Adaptec AHA-2940U/UW/D / AIC-7881U
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 64 (2000ns min, 2000ns max), cache line size 08
Interrupt: pin A routed to IRQ 11
Region 0: I/O ports at fe00 [disabled] [size=256] Region 1: Memory at fdfff000 (32-bit, non-prefetchable) [size=4K] Expansion ROM at fdfe0000 [disabled] [size=64K]

========================================================
lspci -vvv on a bad kernel (first seen on 2.4.18-17.8.0)
========================================================

00:00.0 Class 0600: 1179:0601 (rev 11)
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort+ >SERR- <PERR-
Latency: 0, cache line size 08

00:02.0 Class 0607: 1179:060a (rev 07)
Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=slow >TAbort- <TAbort-
<MAbort- >SERR- <PERR-

        Latency: 0
        Interrupt: pin A routed to IRQ 11
        Region 0: Memory at 10000000 (32-bit, non-prefetchable) [disabled] [size=4K]
        Bus: primary=00, secondary=14, subordinate=14, sec-latency=0
        Memory window 0: 00000000-00000000 [disabled]
        Memory window 1: 00000000-00000000 [disabled]
        I/O window 0: 00000000-00000003 [disabled]
        I/O window 1: 00000000-00000003 [disabled]
        BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset- 16bInt- PostWrite-

00:02.1 Class 0607: 1179:060a (rev 07)
Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=slow >TAbort- <TAbort-
<MAbort- >SERR- <PERR-

        Latency: 0
        Interrupt: pin B routed to IRQ 11
        Region 0: Memory at 10001000 (32-bit, non-prefetchable) [disabled] [size=4K]
        Bus: primary=00, secondary=15, subordinate=15, sec-latency=0
        Memory window 0: 00000000-00000000 [disabled]
        Memory window 1: 00000000-00000000 [disabled]
        I/O window 0: 00000000-00000003 [disabled]
        I/O window 1: 00000000-00000003 [disabled]
        BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset- 16bInt- PostWrite-

00:03.0 Class 0601: 1179:0606 (rev 02)
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-

00:04.0 Class 0300: 102c:00e0 (rev 05)
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping+ SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Region 0: Memory at fe000000 (32-bit, non-prefetchable) [size=16M] Expansion ROM at <unassigned> [disabled] [size=256K]

00:06.0 Class 0604: 1179:0605 (rev 04)
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=slow >TAbort- <TAbort-
<MAbort- >SERR- <PERR-

        Latency: 0
        Bus: primary=00, secondary=01, subordinate=13, sec-latency=0
        I/O behind bridge: 00000000-00000fff
        Memory behind bridge: 00000000-000fffff
        Prefetchable memory behind bridge: 00000000-000fffff
        BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-

01:01.0 Class 0607: 1179:0603 (rev 04)
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=slow >TAbort- <TAbort-
<MAbort- >SERR- <PERR-

        Region 0: Memory at <unassigned> (32-bit, non-prefetchable) [size=4K]
        Bus: primary=01, secondary=12, subordinate=12, sec-latency=0
        Memory window 0: 00000000-00000000
        Memory window 1: 00000000-00000000
        I/O window 0: 00000000-00000003
        I/O window 1: 00000000-00000003
        BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset- 16bInt- PostWrite-

01:01.1 Class 0607: 1179:0603 (rev 04)
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=slow >TAbort- <TAbort-
<MAbort- >SERR- <PERR-

        Region 0: Memory at <unassigned> (32-bit, non-prefetchable) [size=4K]
        Bus: primary=01, secondary=13, subordinate=13, sec-latency=0
        Memory window 0: 00000000-00000000
        Memory window 1: 00000000-00000000
        I/O window 0: 00000000-00000003
        I/O window 1: 00000000-00000003
        BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset- 16bInt- PostWrite-

01:04.0 Class 0100: 1022:2020 (rev 10)
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping+ SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-

        Latency: 64 (1000ns min, 10000ns max)
        Interrupt: pin A routed to IRQ 11
        Region 0: I/O ports at <ignored> [size=128]

01:08.0 Class 0700: 131f:2000 (prog-if 02)
Subsystem: 131f:2000
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Interrupt: pin A routed to IRQ 11
Region 0: I/O ports at <ignored> [size=8]
Capabilities: [a0] Power Management version 1
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-

01:0c.0 Class 0100: 9004:8178
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 64 (2000ns min, 2000ns max), cache line size 08
Interrupt: pin A routed to IRQ 11
Region 0: I/O ports at <ignored> [size=256]
Region 1: Memory at <ignored> (32-bit, non-prefetchable) [size=4K] Expansion ROM at fdfe0000 [disabled] [size=64K]

=====
lsmod
=====

Module Size Used by Not tainted

smbfs                  39264   1  (autoclean)
ide-cd                 31432   0  (autoclean)
cdrom                  30976   0  (autoclean) [ide-cd]
mousedev                5236   1  (autoclean)
input                   5664   0  (autoclean) [mousedev]
parport_pc             17604   1  (autoclean)
lp                      8612   0  (autoclean)
parport                33984   1  (autoclean) [parport_pc lp]
ne                      7696   1
8390                    7788   0  [ne]
ipt_REJECT              3448   2  (autoclean)
iptable_filter          2316   1  (autoclean)
ip_tables              14456   2  [ipt_REJECT iptable_filter]
cs4232                  5092   0
ad1848                 26124   0  [cs4232]
uart401                 8068   0  [cs4232]
sound                  70196   0  [cs4232 ad1848 uart401]
soundcore               6180   5  [sound]
ext3                   64224   8
jbd                    48180   8  [ext3]
tmscsim                33856   1
aic7xxx               127380   2
sd_mod                 13136   6
scsi_mod              102152   3  [tmscsim aic7xxx sd_mod]
#1 lore raw

[Problem] PCI resource conflicts in recent 2.4 kernels - second try

Does anyone have any suggestions for getting the current kernel(s) to behave like the earlier (pre 2.4.18-14) kernels? I've tried most of the PCI kernel parameters without success, though only individually.

Quoted 342 lines · Mace Moneta

I'm running Redhat 8.0 on a docked Toshiba Tecra 730CDT (Pentium 150MHz, 80MB RAM), and recently tried to upgrade my kernel to one of their errata kernels. When I did, I got PCI resource conflicts, and the SCSI devices are unable to initialize. Partitions are not mounted, so the boot fails. I confirmed that the problem also occurs with the latest (2.4.21-pre3) vanilla kernel. Originally reported to Redhat:
https://bugzilla.redhat.com/bugzilla/show_bug.cgi?id=76159

I was unable to find any similar report via google searches, but there are a couple of recent similar reports in the Redhat buzilla (bugs 78035 and 76428).

===================
Last Working kernel
===================

2.4.18-14 (Redhat)

===========
Failed boot
===========

Following copied by hand:

PCI: Cannot allocate resource region 0 of device 01:04.0
PCI: Cannot allocate resource region 0 of device 01:08.0
PCI: Cannot allocate resource region 0 of device 01:0c.0
PCI: Cannot allocate resource region 1 of device 01:0c.0
PCI: Failed to allocate resource 0(0-fff) for 01:01.0
PCI: Failed to allocate resource 0(0-fff) for 01:01.1
PCI: Failed to allocate resource 0(0-7f) for 01:04.0
PCI: Failed to allocate resource 0(0-7) for 01:08.0
PCI: Failed to allocate resource 0(0-ff) for 01:0c.0
PCI: Failed to allocate resource 1(0-fff) for 01:0c.0 Loading aic7xxx module
PCI: Device 01:08.0 not available because of resource collisions
PCI: Device 01:0c.0 not available because of resource collisions /lib/aic7xxx.o init_module
Error: /bin/insmod exited abnormally!
Loading tmscsim module
PCI: Device 01:04.0 not available because of resource collisions /lib/tmscsim.o init_module
Error: /bin/insmod exited abnormally!

====================
Normal boot messages
====================

PCI: PCI BIOS revision 2.10 entry at 0xfd4ae, last bus=21
PCI: Using configuration type 1
PCI: Probing PCI hardware
Unknown bridge resource 0: assuming transparent Unknown bridge resource 1: assuming transparent Unknown bridge resource 2: assuming transparent

===========================================
lspci -vvv on the (good) 2.4.18-14 kernel
===========================================

00:00.0 Host bridge: Toshiba America Info Systems 601 (rev 11)
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort+ >SERR- <PERR-
Latency: 0, cache line size 08

00:02.0 CardBus bridge: Toshiba America Info Systems ToPIC95 (rev 07)
Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=slow >TAbort- <TAbort-
<MAbort- >SERR- <PERR-

        Latency: 0
        Interrupt: pin A routed to IRQ 11
        Region 0: Memory at 10000000 (32-bit, non-prefetchable) [disabled] [size=4K]
        Bus: primary=00, secondary=14, subordinate=14, sec-latency=0
        Memory window 0: 00000000-00000000 [disabled]
        Memory window 1: 00000000-00000000 [disabled]
        I/O window 0: 00000000-00000003 [disabled]
        I/O window 1: 00000000-00000003 [disabled]
        BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset- 16bInt- PostWrite-

00:02.1 CardBus bridge: Toshiba America Info Systems ToPIC95 (rev 07)
Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr-DEVSEL=slow >TAbort- <TAbort-
<MAbort- >SERR- <PERR-

        Latency: 0
        Interrupt: pin B routed to IRQ 11
        Region 0: Memory at 10001000 (32-bit, non-prefetchable) [disabled] [size=4K]
        Bus: primary=00, secondary=15, subordinate=15, sec-latency=0
        Memory window 0: 00000000-00000000 [disabled]
        Memory window 1: 00000000-00000000 [disabled]
        I/O window 0: 00000000-00000003 [disabled]
        I/O window 1: 00000000-00000003 [disabled]
        BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset- 16bInt- PostWrite-

00:03.0 ISA bridge: Toshiba America Info Systems: Unknown device 0606 (rev 02)
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-

00:04.0 VGA compatible controller: Chips and Technologies F65550 (rev 05) (prog-if 00 [VGA])
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping+ SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Region 0: Memory at fe000000 (32-bit, non-prefetchable) [size=16M] Expansion ROM at <unassigned> [disabled] [size=256K]

00:06.0 PCI bridge: Toshiba America Info Systems: Unknown device 0605 (rev 04) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=slow >TAbort- <TAbort-
<MAbort- >SERR- <PERR-

        Latency: 0
        Bus: primary=00, secondary=01, subordinate=13, sec-latency=0
        I/O behind bridge: 00000000-00000fff
        Memory behind bridge: 00000000-000fffff
        Prefetchable memory behind bridge: 00000000-000fffff
        BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-

01:01.0 CardBus bridge: Toshiba America Info Systems ToPIC95 PCI to CardBus Bridge for Notebooks (rev 04)
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=slow >TAbort- <TAbort-
<MAbort- >SERR- <PERR-

        Region 0: Memory at 10002000 (32-bit, non-prefetchable) [size=4K]
        Bus: primary=01, secondary=12, subordinate=12, sec-latency=0
        Memory window 0: 00000000-00000000
        Memory window 1: 00000000-00000000
        I/O window 0: 00000000-00000003
        I/O window 1: 00000000-00000003
        BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset- 16bInt- PostWrite-

01:01.1 CardBus bridge: Toshiba America Info Systems ToPIC95 PCI to CardBus Bridge for Notebooks (rev 04)
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=slow >TAbort- <TAbort-
<MAbort- >SERR- <PERR-

        Region 0: Memory at 10003000 (32-bit, non-prefetchable) [size=4K]
        Bus: primary=01, secondary=13, subordinate=13, sec-latency=0
        Memory window 0: 00000000-00000000
        Memory window 1: 00000000-00000000
        I/O window 0: 00000000-00000003
        I/O window 1: 00000000-00000003
        BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset- 16bInt- PostWrite-

01:04.0 SCSI storage controller: Advanced Micro Devices [AMD] 53c974 [PCscsi] (rev 10)
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+
Stepping+ SERR+ FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-

        Latency: 64 (1000ns min, 10000ns max)
        Interrupt: pin A routed to IRQ 11
        Region 0: I/O ports at ff80 [size=128]

01:08.0 Serial controller: Siig Inc CyberSerial (1-port) 16550 (prog-if 02 [16550])
Subsystem: Siig Inc CyberSerial (1-port) 16550
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Interrupt: pin A routed to IRQ 11
Region 0: I/O ports at ff78 [size=8]
Capabilities: [a0] Power Management version 1
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-

01:0c.0 SCSI storage controller: Adaptec AHA-2940U/UW/D / AIC-7881U
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 64 (2000ns min, 2000ns max), cache line size 08
Interrupt: pin A routed to IRQ 11
Region 0: I/O ports at fe00 [disabled] [size=256] Region 1: Memory at fdfff000 (32-bit, non-prefetchable) [size=4K] Expansion ROM at fdfe0000 [disabled] [size=64K]

========================================================
lspci -vvv on a bad kernel (first seen on 2.4.18-17.8.0)
========================================================

00:00.0 Class 0600: 1179:0601 (rev 11)
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort+ >SERR- <PERR-
Latency: 0, cache line size 08

00:02.0 Class 0607: 1179:060a (rev 07)
Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=slow >TAbort- <TAbort-
<MAbort- >SERR- <PERR-

        Latency: 0
        Interrupt: pin A routed to IRQ 11
        Region 0: Memory at 10000000 (32-bit, non-prefetchable) [disabled] [size=4K]
        Bus: primary=00, secondary=14, subordinate=14, sec-latency=0
        Memory window 0: 00000000-00000000 [disabled]
        Memory window 1: 00000000-00000000 [disabled]
        I/O window 0: 00000000-00000003 [disabled]
        I/O window 1: 00000000-00000003 [disabled]
        BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset- 16bInt- PostWrite-

00:02.1 Class 0607: 1179:060a (rev 07)
Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=slow >TAbort- <TAbort-
<MAbort- >SERR- <PERR-

        Latency: 0
        Interrupt: pin B routed to IRQ 11
        Region 0: Memory at 10001000 (32-bit, non-prefetchable) [disabled] [size=4K]
        Bus: primary=00, secondary=15, subordinate=15, sec-latency=0
        Memory window 0: 00000000-00000000 [disabled]
        Memory window 1: 00000000-00000000 [disabled]
        I/O window 0: 00000000-00000003 [disabled]
        I/O window 1: 00000000-00000003 [disabled]
        BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset- 16bInt- PostWrite-

00:03.0 Class 0601: 1179:0606 (rev 02)
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-

00:04.0 Class 0300: 102c:00e0 (rev 05)
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping+ SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Region 0: Memory at fe000000 (32-bit, non-prefetchable) [size=16M] Expansion ROM at <unassigned> [disabled] [size=256K]

00:06.0 Class 0604: 1179:0605 (rev 04)
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=slow >TAbort- <TAbort-
<MAbort- >SERR- <PERR-

        Latency: 0
        Bus: primary=00, secondary=01, subordinate=13, sec-latency=0
        I/O behind bridge: 00000000-00000fff
        Memory behind bridge: 00000000-000fffff
        Prefetchable memory behind bridge: 00000000-000fffff
        BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-

01:01.0 Class 0607: 1179:0603 (rev 04)
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=slow >TAbort- <TAbort-
<MAbort- >SERR- <PERR-

        Region 0: Memory at <unassigned> (32-bit, non-prefetchable) [size=4K]
        Bus: primary=01, secondary=12, subordinate=12, sec-latency=0
        Memory window 0: 00000000-00000000
        Memory window 1: 00000000-00000000
        I/O window 0: 00000000-00000003
        I/O window 1: 00000000-00000003
        BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset- 16bInt- PostWrite-

01:01.1 Class 0607: 1179:0603 (rev 04)
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=slow >TAbort- <TAbort-
<MAbort- >SERR- <PERR-

        Region 0: Memory at <unassigned> (32-bit, non-prefetchable) [size=4K]
        Bus: primary=01, secondary=13, subordinate=13, sec-latency=0
        Memory window 0: 00000000-00000000
        Memory window 1: 00000000-00000000
        I/O window 0: 00000000-00000003
        I/O window 1: 00000000-00000003
        BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset- 16bInt- PostWrite-

01:04.0 Class 0100: 1022:2020 (rev 10)
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping+ SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-

        Latency: 64 (1000ns min, 10000ns max)
        Interrupt: pin A routed to IRQ 11
        Region 0: I/O ports at <ignored> [size=128]

01:08.0 Class 0700: 131f:2000 (prog-if 02)
Subsystem: 131f:2000
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Interrupt: pin A routed to IRQ 11
Region 0: I/O ports at <ignored> [size=8]
Capabilities: [a0] Power Management version 1
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-

01:0c.0 Class 0100: 9004:8178
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 64 (2000ns min, 2000ns max), cache line size 08
Interrupt: pin A routed to IRQ 11
Region 0: I/O ports at <ignored> [size=256]
Region 1: Memory at <ignored> (32-bit, non-prefetchable) [size=4K] Expansion ROM at fdfe0000 [disabled] [size=64K]

=====
lsmod
=====

Module Size Used by Not tainted

smbfs                  39264   1  (autoclean)
ide-cd                 31432   0  (autoclean)
cdrom                  30976   0  (autoclean) [ide-cd]
mousedev                5236   1  (autoclean)
input                   5664   0  (autoclean) [mousedev]
parport_pc             17604   1  (autoclean)
lp                      8612   0  (autoclean)
parport                33984   1  (autoclean) [parport_pc lp]
ne                      7696   1
8390                    7788   0  [ne]
ipt_REJECT              3448   2  (autoclean)
iptable_filter          2316   1  (autoclean)
ip_tables              14456   2  [ipt_REJECT iptable_filter]
cs4232                  5092   0
ad1848                 26124   0  [cs4232]
uart401                 8068   0  [cs4232]
sound                  70196   0  [cs4232 ad1848 uart401]
soundcore               6180   5  [sound]
ext3                   64224   8
jbd                    48180   8  [ext3]
tmscsim                33856   1
aic7xxx               127380   2
sd_mod                 13136   6
scsi_mod              102152   3  [tmscsim aic7xxx sd_mod]
#2 lore raw

Re: [Problem] PCI resource conflicts in recent 2.4 kernels - second try

Quoted 2 lines · Mace Moneta
Quoted 2 lines

00:06.0 PCI bridge: Toshiba America Info Systems: Unknown device 0605 (rev 04) (prog-if 00 [Normal decode])

Yet another broken bridge...
Does this patch help?

Ivan.

drivers/pci/quirks.c renamed from drivers/pci/quirks.c.orig +1 -0
@@ -586,6 +586,7 @@ static struct pci_fixup pci_fixups[] __i
 	 * instead of 0x01.
 	 */
 	{ PCI_FIXUP_HEADER,	PCI_VENDOR_ID_INTEL,	PCI_DEVICE_ID_INTEL_82380FB,	quirk_transparent_bridge },
+	{ PCI_FIXUP_HEADER,	PCI_VENDOR_ID_TOSHIBA,	0x605,				quirk_transparent_bridge },
 
 	{ PCI_FIXUP_FINAL,	PCI_VENDOR_ID_CYRIX,	PCI_DEVICE_ID_CYRIX_PCI_MASTER, quirk_mediagx_master },
 
#3 lore raw

Re: [Problem] PCI resource conflicts in recent 2.4 kernels - second try

Yes, confirming that this corrected the problem. Tested in 2.4.21-pre3. Thanks for your help!

Quoted 19 lines · Ivan Kokshaysky
Quoted 2 lines · Mace Moneta
Quoted 2 lines

00:06.0 PCI bridge: Toshiba America Info Systems: Unknown device 0605 (rev 04) (prog-if 00 [Normal decode])

Yet another broken bridge...
Does this patch help?

Ivan.

drivers/pci/quirks.c renamed from drivers/pci/quirks.c.orig +1 -0
@@ -586,6 +586,7 @@ static struct pci_fixup pci_fixups[] __i
 	 * instead of 0x01.
 	 */
 	{ PCI_FIXUP_HEADER,	PCI_VENDOR_ID_INTEL,	PCI_DEVICE_ID_INTEL_82380FB,	quirk_transparent_bridge },
+	{ PCI_FIXUP_HEADER,	PCI_VENDOR_ID_TOSHIBA,	0x605,				quirk_transparent_bridge },
 
 	{ PCI_FIXUP_FINAL,	PCI_VENDOR_ID_CYRIX,	PCI_DEVICE_ID_CYRIX_PCI_MASTER, quirk_mediagx_master },