Linux 2.4.21pre4-ac5 status report
hi.
I wanted to give some status report after using this kernel for 1 week.
The harddisk freeze bug that I got with WDC WD1800JB-00DUA0 drives did not occur within this week (it used to happen within 5 days).
The promise driver still freezes on my pdc20268 when using >mdma0 . I recently replaced the ultra tx2 controller with a hpt370 and it works all fine. So I would suggest either removing the pdc20268 from the list of supported controllers or letting promise fix this bug.
The overlay mode of my bt848 based tv card does not work anymore (stripes as if the linewidth/offset is wrong).
Best,
Soeren (who has for the first time since some months an uptime of >1 week).
Quoted 3 lines
The promise driver still freezes on my pdc20268 when using >mdma0.
Try upgrading the BIOS on the 20268. Sounds incredible, but it did solve all the problems I was seeing with the card in Linux.
Signature · 1 line
Tomas Szepe <[email protected]>
Quoted 6 lines · Tomas Szepe
Quoted 3 lines
The promise driver still freezes on my pdc20268 when using >mdma0.
Try upgrading the BIOS on the 20268. Sounds incredible, but it did solve all the problems I was seeing with the card in Linux.
I checked for new bioses 2 on thursday -> there where no newer bioses available. I guess you have a single pdc20268 which is full of disks (i.e. master and slave used?).
Soeren.
Quoted 4 lines
Quoted 2 lines
Quoted 2 lines
Quoted 8 lines
Quoted 4 lines
Quoted 1 line
The promise driver still freezes on my pdc20268 when using >mdma0.
Try upgrading the BIOS on the 20268. Sounds incredible, but it did solve all the problems I was seeing with the card in Linux.
I checked for new bioses 2 on thursday -> there where no newer bioses available. I guess you have a single pdc20268 which is full of disks (i.e. master and slave used?).
I've got a single pdc20268 with just one drive on each channel... Works nicely with recent -ac kernels.
Signature · 1 line
Tomas Szepe <[email protected]>
Quoted 9 lines · Tomas Szepe
Quoted 9 lines
Quoted 6 lines
Quoted 3 lines
The promise driver still freezes on my pdc20268 when using >mdma0.
Try upgrading the BIOS on the 20268. Sounds incredible, but it did solve all the problems I was seeing with the card in Linux.
Quoted 6 lines
Quoted 3 lines
I checked for new bioses 2 on thursday -> there where no newer bioses available. I guess you have a single pdc20268 which is full of disks (i.e. master and slave used?).
I've got a single pdc20268 with just one drive on each channel... Works nicely with recent -ac kernels.
As I guessed. I've got two pdc20268 with just one drive per channel (where the last drive is a cdrom-drive)
So one pdc no problem >1 -> trouble.
S.