Skip to contentSkip to conversation

PROBLEM

DISCUSSION Kósa Ferenc 2 participants 2 messages Mar 9, 2003

lore
Share & tools
lore
#0 lore raw

1. Newer kernels do not boot on 386

2. I use linux successfully since 1997. A year ago I've tried to use linux on an AMD 5x86, and I realized that newer kernels (>2.4.13) do not boot. It starts: "loading linux........" and then after a while it reboots the computer, before "Ok, booting the kernel". I found the same problem on a Cyrix 486SLC2 too. I tried compile kernels by myself, but they did the same too, except for 2.4.13. The official Debian kernel-images failed too. I use lilo-2.2, with debian 3.0 stable (woody).

3. Kernel
4. Kernel version: > 2.4.13
5. No Oops..
6. No shell script
7. AMD 5x86, Cyrix 486SLC2 - 4MB RAM 800MB ide hd, 200MB swap, no PCI, no SCSI, 2 isa eexpress network adapters, 1 serial, 1 parallel ports, lilo-2.2. boot loader, debian 3.0 stable woody linux

thanks for helping, regards

Signature · 1 line
Kósa Ferenc <[email protected]>
#1 lore raw
Quoted 11 lines

1. Newer kernels do not boot on 386

2. I use linux successfully since 1997. A year ago I've tried to use linux on an AMD 5x86, and I realized that newer kernels (>2.4.13) do no= t
boot. It starts: "loading linux........" and then after a while it reboots the computer, before "Ok, booting the kernel". I found the same problem on a Cyrix 486SLC2 too. I tried compile kernels by myself, but they did the same too, except for 2.4.13. The official Debian kernel-images failed too. I use lilo-2.2, with debian 3.0 stable (woody).

I've used 2.4.18 extensively on an Intel 486 SX-25, without problems. I did notice the immediate rebooting problem using a few old 2.5.x trees, but that was months ago, around the 2.5.40 timeframe, more recent 2.5.x trees worked fine.

Incidently, I haven't had time to do my usual testing on low spec machines recently, but intend restart that at the earliest opportunity.

John.