Skip to contentSkip to conversation

2.5.64-ac3: Crash in ide_init_queue

DISCUSSION Daniel Egger 2 participants 6 messages Mar 14, 2003 – Mar 15, 2003

lore
Share & tools
lore
#0 lore raw

Hija,

my new motherboard with KT400 chipset oopses in ide_init_queue on bootup with the follow output:

Oops: 0000
CPU:    0
EIP:    0060:[<00000000>]    Not tainted
EFLAGS: 00010282

EIP is at 0x0
eax: c044af44 ebx: c044aff0 ecx: 00000000 edx: 00000000
esi: c044b000 edi: c044af44 ebp: c151dee8 esp: c151ded0
ds: 007b es: 007b ss: 0068
Process swapper (pid: 1, threadinfo=c151c000 task=dff8e040)

Stack: c0263dff c044aff0 00000001 c03cd660 c044aff0 c1527ef4 c151df30 c0264006
       c044aff0 c0262b10
Call Trace:
 [<c0263dff>] ide_init_queue+0x9f/0xb0
 [<c0264006>] init_irq+0x1f6/0x3d0
 [<c0262b10>] ide_intr+0x0/0x180
 [<c0264658>] hwif_init+0xe8/0x290
 [<c0264924>] ideprobe_init+0xf4/0x110
 [<c02209d1>] driver_register+0x31/0x40
 [<c010507d>] init+0x3d/0x160
 [<c0105040>] init+0x0/0x160
 [<c010740d>] kernel_thread_helper+0x5/0x18

Code:  Bad EIP value.

The system doesn't have a harddrive, both channels are enabled, the second bus has a TOSHIBA Combo DVD/CD-R SD-R1002 conntected as master device. Disabling the secondary channel channel fixes the problem.

Should I bugzill it?

Signature · 2 lines
Servus,
       Daniel
#1 lore raw
Quoted 4 lines · Daniel Egger

Hija,

my new motherboard with KT400 chipset oopses in ide_init_queue on bootup with the follow output:

using ide tcq?

Signature · 1 line
Jens Axboe
#2 lore raw

Am Fre, 2003-03-14 um 22.25 schrieb Jens Axboe:

Quoted 1 line

using ide tcq?

It's compiled into the kernel but unused since there's no harddrive in the machine. I'll remove it from the config and retry.

Signature · 2 lines
Servus,
       Daniel
#3 lore raw

Am Sam, 2003-03-15 um 16.25 schrieb Daniel Egger:

Quoted 4 lines
Quoted 1 line

using ide tcq?

It's compiled into the kernel but unused since there's no harddrive in the machine. I'll remove it from the config and retry.

Nope, same problem without tcq.

Signature · 2 lines
Servus,
       Daniel
#4 lore raw
Quoted 8 lines · Daniel Egger

Am Sam, 2003-03-15 um 16.25 schrieb Daniel Egger:

Quoted 4 lines
Quoted 1 line

using ide tcq?

It's compiled into the kernel but unused since there's no harddrive in the machine. I'll remove it from the config and retry.

Nope, same problem without tcq.

Please double check, TCQ is the only way that ide_init_queue() would end up with NULL EIP.

You could make the ide_dma_queued_on() conditional, ala:

#ifdef CONFIG_BLK_DEV_IDE_TCQ_DEFAULT
	if (HWIF(drive)->ide_dma_queued_on)
		HWIF(drive)->ide_dma_queued_on(drive);

#endif

Signature · 1 line
Jens Axboe
#5 lore raw

Am Sam, 2003-03-15 um 17.31 schrieb Jens Axboe:

Quoted 2 lines

Please double check, TCQ is the only way that ide_init_queue() would end up with NULL EIP.

Yep this was a nobrainer of mine. As stated in a followup mail, this problem went away and a different IDE problem stepped up.

Signature · 2 lines
Servus,
       Daniel