Skip to contentSkip to conversation

sisfb: two more little problems

DISCUSSION Torrey Hoffman 3 participants 4 messages Mar 26, 2003 – Mar 27, 2003

lore
Share & tools
lore
#0 lore raw

Besides the problems with mode switching with fbcon, I have two other problems with sisfb:

1. My gpm mouse cursor on the framebuffer console is a cyan rectangle with a bright orange "G" in it. Actually the G has a "^" accent over it. That's just when it's over a blank spot. When I move it over other characters, the character in the pointer changes. However, it does work for selecting text.

2. I can't seem to set the default video mode from the kernel command line. I have tried:

video=sis:1024x768-24@75
video=sisfb:1024x768-24@75

and neither one works. What is the expected command line?

Thanks,

Signature · 1 line
Torrey Hoffman <[email protected]>
#1 lore raw
Quoted 9 lines

Besides the problems with mode switching with fbcon, I have two other problems with sisfb:

1. My gpm mouse cursor on the framebuffer console is a cyan rectangle with a bright orange "G" in it. Actually the G has a "^" accent over it. That's just when it's over a blank spot. When I move it over other characters, the character in the pointer changes. However, it does work for selecting text.

Try my latest patch. It should fix this.

http://phoenix.infradead.org/~jsimmons/fbdev.diff.gz

Let me know how it works out for you.

Quoted 7 lines

2. I can't seem to set the default video mode from the kernel command line. I have tried:

video=sis:1024x768-24@75
video=sisfb:1024x768-24@75

and neither one works. What is the expected command line?

It is video=sisfb:...

Hm. It should work.

#2 lore raw
Quoted 11 lines · James Simmons
Quoted 7 lines

2. I can't seem to set the default video mode from the kernel command line. I have tried:

video=sis:1024x768-24@75
video=sisfb:1024x768-24@75

and neither one works. What is the expected command line?

It is video=sisfb:...

Hm. It should work.

The sisfb parameter syntax is a bit tricky, it's explained at the maintainer's website:

http://www.webit.at/~twinny/linuxsisvga.shtml

#3 lore raw
In reply to James Simmons
Quoted 11 lines · James Simmons
Quoted 8 lines

Besides the problems with mode switching with fbcon, I have two other problems with sisfb:

1. My gpm mouse cursor on the framebuffer console is a cyan rectangle with a bright orange "G" in it. Actually the G has a "^" accent over it. That's just when it's over a blank spot. When I move it over other characters, the character in the pointer changes. However, it does work for selecting text.

Try my latest patch. It should fix this.

Well, not quite. The problem is still there. I have checked it a little more closely though, and noticed that it isn't always there. Some virtual consoles have the problem and some don't. It seems like before I log in on a console, there's no problem. And sometimes even after logging in it is OK, but usually after I log in the green and orange framebuffer mousepointer starts.

This is Red Hat 8.0, by the way. I think it does something to the console when I log in, the screen usually blanks for a second after I enter the login password and before the bash prompt appears.

Quoted 7 lines
Quoted 3 lines

video=sisfb:1024x768-24@75

and neither one works. What is the expected command line?

It is video=sisfb:...

Hm. It should work.

I found the sisfb web page and it is:
video=sisfb:mode:1024x768x24

and that works, but only at 60 HZ. I haven't tried putting a "@75" on the end yet...

Thanks again!

Signature · 1 line
Torrey Hoffman <[email protected]>