Skip to contentSkip to conversation

24bit hdsp

DISCUSSION David E. Storey 1 participant 1 message May 29, 2003

lore
Share & tools
lore
#0 lore raw

I was reading

http://petertodd.ca/hdsp.php

and the only place it mentioned 24 bit was down toward the bottom, implying that it wasn't supported. But now that I know it is and looking through the source for jack, it would appear that by default, it will open the device in 24bit mode, that's good. It would appear that as opposed to most other drivers, I shouldn't be using dithering on this device as I'll loose my dynamic range, yes? (I noticed your name all over the code, so I'm betting your probably the best to ask this question...)

d!

Quoted 11 lines · Paul Davis
Quoted 5 lines

what would it take to support 24bit audio in the hdsp driver? Would it take away from the number of available channels? I'd like to use an Alesis AI-3 (mostly due to cost) with my multiface, but I'd like to be able to utilize all 18 channels the multiface provides. Is there any way I can help?

the driver already supports 24 bit audio. if you use the hw layer, it must match the hw's definition of 24 bit: 24 bits packed in the upper bits of a 32 bit word. if you use the plughw layer, you can probably get "true" 24 bit audio (i doubt if this code path has been explored much).