asoundrc for Delta66 and intel8x0 3 questions
Hi All
I've been trying to configure an asound file for my Delta66 and Intel8x0 (SIS645DX chipset... yes it works with all functionality including MIDI) cards.
I have built the file at the bottom based on examples. I would like to convert it so that both cards are seen as one (purely for ease of playback monitoring.)
1. Can anyone confirm that I have done the right thing here to see the discreet mono inputs and S/PDIF and also access the intel8x0 card (as separate entities)?
2. Can anyone suggest how to convert this so both cards are seen as one (resulting in 6 analogue ins and outs and stereo S/PDIF) .
3. The intel8x0 seems locked at 48khz is there anything I can do to dither this to 44.1Khz without seriously impacting latency
Here's what I've don so far
# Asound.conf START
pcm.main {
type hw
card 1
device 2
}
pcm.ice1712 {
type hw
card 1
device 1
}
ctl.ice1712 {
type hw
card 1
}pcm.intel8x0 {
type hw
card 0
}
ctl.intel8x0 {
type hw
card 0
}# adcdac 1
pcm.c1 {
type plug
ttable.0.0 1
slave.pcm ice1712
}# adcdac 2
pcm.c2 {
type plug
ttable.0.1 1
slave.pcm ice1712
}# adcdac 3
pcm.c3 {
type plug
ttable.0.2 1
slave.pcm ice1712
}# adcdac 4
pcm.c4 {
type plug
ttable.0.3 1
slave.pcm ice1712
}
#SPDIF channels only
pcm.ice1712_spdif {
type plug
ttable.0.8 1
ttable.1.9 1
slave.pcm ice1712
}# Asound.conf END
cheers
Allan Klinbail
Signature · 8 lines
Allan Klinbail <[email protected]> ------------------------------------------------------- This SF.net email is sponsored by: Etnus, makers of TotalView, The best thread debugger on the planet. Designed with thread debugging features you've never dreamed of, try TotalView 6 free at www.etnus.com.