Terratec DMX 6fire audio input
Hello developers.
Here is a patch which enables to do audio input on this particular card even when not doing a soft reboot from windows. The problem with the current driver is that the PCA9554 is set to input mode for all IO pins after a cold reset. In order to set the pins to output mode register 3 of this chip has to be set.
As I don't know if there are any pins used as input I have set register 3 to 0x80, so the MSB is input. Hopefully my patch won't do any damage! Maybe someone can check the content of this register after a warm reboot from windows. I have a linux only machine.
Keep on the good work.
bye,
Eduard.
PS: Sorry if this email arrives twice, it didn't seem to come through the first time.
sound/pci/ice1712/ews.c renamed from alsa-driver-0.9.4/sound/pci/ice1712/ews.c +7 -5
@@ -389,6 +389,12 @@* initialize the chip */ +#define PCF9554_REG_INPUT 0 +#define PCF9554_REG_OUTPUT 1 +#define PCF9554_REG_POLARITY 2 +#define PCF9554_REG_CONFIG 3 +static int snd_ice1712_6fire_write_pca (ice1712_t *ice,unsigned char reg,unsigned char data); +static int __devinit snd_ice1712_ews_init (ice1712_t *ice) {int err;
@@ -425,6 +431,7 @@snd_printk ("PCF9554 initialization failed\n" );return err; } +snd_ice1712_6fire_write_pca (ice,PCF9554_REG_CONFIG ,0x80 );break ;case ICE1712_SUBDEVICE_EWS88MT :case ICE1712_SUBDEVICE_EWS88MT_NEW :
@@ -750,11 +757,6 @@* DMX 6Fire specific controls */ -#define PCF9554_REG_INPUT 0 -#define PCF9554_REG_OUTPUT 1 -#define PCF9554_REG_POLARITY 2 -#define PCF9554_REG_CONFIG 3 -static int snd_ice1712_6fire_read_pca (ice1712_t *ice,unsigned char reg) {unsigned char byte;
At 22 Jun 2003 22:52:34 +0200,
Quoted 10 lines · Eduard Hasenleithner
[1 <text/plain (7bit)>]
Hello developers.Here is a patch which enables to do audio input on this particular card even when not doing a soft reboot from windows. The problem with the current driver is that the PCA9554 is set to input mode for all IO pins after a cold reset. In order to set the pins to output mode register 3 of this chip has to be set.
Quoted 4 lines
As I don't know if there are any pins used as input I have set register 3 to
0x80, so the MSB is input. Hopefully my patch won't do any damage! Maybe someone can check the content of this register after a warm reboot from windows. I have a linux only machine.
thanks for the patch!
Jaroslav alreay applied it to cvs.
IIRC, the connection to PCA9554 are all output (bit 0-6), so your patch should be ok.
Takashi
-------------------------------------------------------
This SF.Net email is sponsored by: INetU
Attention Web Developers & Consultants: Become An INetU Hosting Partner. Refer Dedicated Servers. We Manage Them. You Get 10% Monthly Commission! INetU Dedicated Managed Hosting http://www.inetu.net/partner/index.php