Skip to contentSkip to conversation

ALSA ../alsa-kernel/ppc/keywest.c:84: tumbler: cannot initialize the MCS

DISCUSSION Grzesiek Sedek 2 participants 5 messages Jun 28, 2003 – Jul 2, 2003

lore
Share & tools
lore
#0 lore raw

I had my alsa running fine for a while at some point audio stop working (must been afer one of upgrades to 9.4 on debian ppc sid) this is dmesg error I'm getting:

ALSA ../alsa-kernel/ppc/keywest.c:84: tumbler: cannot initialize the MCS

modules are loading ok but no sound.
Thanks for any help.

Signature · 9 lines
Grzesiek Sedek <[email protected]>



-------------------------------------------------------
This SF.Net email sponsored by: Free pre-built ASP.NET sites including
Data Reports, E-commerce, Portals, and Forums are available now.
Download today and enter to win an XBOX or Visual Studio .NET.
http://aspnet.click-url.com/go/psa00100006ave/direct;at.asp_061203_01/01
#1 lore raw

At 28 Jun 2003 16:50:55 +0100,

Quoted 9 lines · Grzesiek Sedek

I had my alsa running fine for a while at some point audio stop working (must been afer one of upgrades to 9.4 on debian ppc sid) this is dmesg error I'm getting:

ALSA ../alsa-kernel/ppc/keywest.c:84: tumbler: cannot initialize the MCS

modules are loading ok but no sound.
Thanks for any help.

did you load/build the i2c-keywest driver, too?
the pmac tumbler/snapper requires this for controlling the chip over i2c.

Takashi

-------------------------------------------------------
This SF.Net email sponsored by: Free pre-built ASP.NET sites including Data Reports, E-commerce, Portals, and Forums are available now. Download today and enter to win an XBOX or Visual Studio .NET.
http://aspnet.click-url.com/go/psa00100006ave/direct;at.asp_061203_01/01

#2 lore raw

Yes both i2c-keywest and i2c-core are build and loaded. I'm really puzzled-I never had any problems like that. I've build few kernels since alsa stopped using old working .config's and still no luck.
Thanks

Quoted 18 lines · Takashi Iwai

At 28 Jun 2003 16:50:55 +0100,

Quoted 9 lines · Grzesiek Sedek

I had my alsa running fine for a while at some point audio stop working (must been afer one of upgrades to 9.4 on debian ppc sid) this is dmesg error I'm getting:

ALSA ../alsa-kernel/ppc/keywest.c:84: tumbler: cannot initialize the MCS

modules are loading ok but no sound.
Thanks for any help.

did you load/build the i2c-keywest driver, too?
the pmac tumbler/snapper requires this for controlling the chip over i2c.

Takashi

Signature · 9 lines
Grzesiek Sedek <[email protected]>



-------------------------------------------------------
This SF.Net email sponsored by: Free pre-built ASP.NET sites including
Data Reports, E-commerce, Portals, and Forums are available now.
Download today and enter to win an XBOX or Visual Studio .NET.
http://aspnet.click-url.com/go/psa00100006ave/direct;at.asp_061203_01/01
#3 lore raw

At 30 Jun 2003 14:17:00 +0100,

Quoted 5 lines · Grzesiek Sedek

Yes both i2c-keywest and i2c-core are build and loaded. I'm really puzzled-I never had any problems like that. I've build few kernels since alsa stopped using old working .config's and still no luck.

could you check dmasound-pmac driver whether it can be loaded properly? if it's ok, i can compare with it.

Takashi

-------------------------------------------------------
This SF.Net email sponsored by: Free pre-built ASP.NET sites including Data Reports, E-commerce, Portals, and Forums are available now. Download today and enter to win an XBOX or Visual Studio .NET.
http://aspnet.click-url.com/go/psa00100006ave/direct;at.asp_061203_01/01

#4 lore raw

I did try dmasound-pmac some days ago and it seem to load with no errors (I'm not sure about it - I'll load it again and check) but there was no sound from xmms or pd. only one unusual thing I've noticed was "beep" when ibook go to sleep - indicating that oss sound driver was in fact loaded and working (at least partly). This is under alsa 0.9.4 and kernel 2.4.21-ben2 with kernel 2.4.20-ben10 and alsa 0.9.1 everything is ok.

Quoted 13 lines · Takashi Iwai

At 30 Jun 2003 14:17:00 +0100,

Quoted 5 lines · Grzesiek Sedek

Yes both i2c-keywest and i2c-core are build and loaded. I'm really puzzled-I never had any problems like that. I've build few kernels since alsa stopped using old working .config's and still no luck.

could you check dmasound-pmac driver whether it can be loaded properly? if it's ok, i can compare with it.

Takashi

Signature · 9 lines
Grzesiek Sedek <[email protected]>



-------------------------------------------------------
This SF.Net email sponsored by: Free pre-built ASP.NET sites including
Data Reports, E-commerce, Portals, and Forums are available now.
Download today and enter to win an XBOX or Visual Studio .NET.
http://aspnet.click-url.com/go/psa00100006ave/direct;at.asp_061203_01/01