Skip to contentSkip to conversation

first pass at a spamassassin/spamc/spamd policy

PATCH Colin Walters 2 participants 4 messages Jul 15, 2003 – Jul 16, 2003 SELinux security module

lore
Share & tools
lore
#0 lore raw

Hi,

Attached is a first attempt at a spamassassin policy. It is not going to be sufficient for most typical users though, because we don't currently have a clean way to transition from procmail_t to e.g. user_spamc_t.

Russell and I discussed this issue on IRC last night, and he was of the opinion that we should create a shell script wrapper for procmail which looked at the type of the home directory of the user we're delivering to, and computing and transitioning to a new type (e.g. user_procmail_t) based on that. Once that's in place, we would have a rule like:

ifdef(procmail.te', domain_auto_trans($1_procmail_t, spamc_exec_t, $1_spamc_t) ')
in spamassassin_macros.te.

One other issue I ran into; what's a good way to specify that a program may interact with the user? Right now I'm doing:

allow $1_$2_t privfd:fd use;
allow $1_$2_t userpty_type:chr_file rw_file_perms;

But this seems a bit unclean. Any suggestions?

#
# Macros for spamassassin domains.
#
# Author: Colin Walters <[email protected]>

# spamassassin_domain(domain_prefix)
#
# Define derived domains for various spamassassin tools when executed

# by a user domain.
#
# The type declarations for the executable types of these programs are
# provided separately in domains/program/spamassassin.te and
# domains/program/spamc.te.
#
undefine(`spamassassin_domain')
ifdef(`spamassassin.te', `define(`using_spamassassin', `')')
ifdef(`spamd.te', `define(`using_spamassassin', `')')
ifdef(`spamc.te', `define(`using_spamassassin', `')')

ifdef(using_spamassassin',

#######
# Macros used internally in these spamassassin macros. #

###
# Define a domain for a spamassassin-like program (spamc/spamassassin). #
# Note: most of this should really be in a generic macro like # base_user_program($1, foo) define(spamassassin_program_domain',
type $1_$2_t, domain, privlog;
domain_auto_trans($1_t, $2_exec_t, $1_$2_t)

role $1_r types $1_$2_t;
general_domain_access($1_$2_t)

base_file_read_access($1_$2_t) normal_config_file_read_access($1_$2_t) uses_shlib($1_$2_t)
read_locale($1_$2_t)
dontaudit $1_$2_t var_t:dir search;
allow $1_$2_t privfd:fd use;
allow $1_$2_t userpty_type:chr_file rw_file_perms; ') dnl end spamassassin_program_domain

###
# Give privileges to a domain for accessing ~/.spamassassin

# and a few other misc things like /dev/random.
# This is granted to /usr/bin/spamassassin and
# /usr/sbin/spamd, but NOT spamc (because it does not need it).
#
define(`spamassassin_agent_privs',`
allow $1 { home_root_t user_home_dir_type sysadm_home_dir_t }:dir { search getattr };
file_type_auto_trans($1, $2_home_dir_t, $2_home_spamassassin_t)
create_dir_file($1, $2_home_spamassassin_t)

allow $1 random_device_t:chr_file r_file_perms;
')

#######
# Define the main spamassassin macro. This itself creates a

# domain for /usr/bin/spamassassin, and also spamc/spamd if
# applicable.
#
define(`spamassassin_domain',`
spamassassin_program_domain($1, spamassassin)

# For perl libraries.
allow $1_spamassassin_t lib_t:file rx_file_perms;
# Ignore perl digging in /proc and /var.
dontaudit $1_spamassassin_t proc_t:dir search;
dontaudit $1_spamassassin_t { sysctl_t sysctl_kernel_t }:dir search;

# The type of ~/.spamassassin
type $1_home_spamassassin_t, file_type, sysadmfile; create_dir_file($1_t, $1_home_spamassassin_t)
allow $1_t $1_home_spamassassin_t:notdevfile_class_set { relabelfrom relabelto }; allow $1_t $1_home_spamassassin_t:dir { relabelfrom relabelto };

spamassassin_agent_privs($1_spamassassin_t, $1)

# Uncomment if you have spamassassin do DNS lookups #can_network($1_spamassassin_t)

###
# Define the domain for /usr/bin/spamc
#
ifdef(spamc.te',
spamassassin_program_domain($1, spamc)
can_network($1_spamc_t)

# Allow connecting to a local spamd
ifdef(spamd.te',
can_tcp_connect($1_spamc_t, spamd_t)
') dnl endif spamd.te
') dnl endif spamc.te

###
# Define the domain for /usr/sbin/spamd
#
ifdef(spamd.te',

spamassassin_agent_privs(spamd_t, $1)

') dnl endif spamd.te

') dnl end spamassassin_domain

', `

define(spamassassin_domain',')

')

#DESC SpamAssassin
#
# Author: Colin Walters <[email protected]>
# X-Debian-Packages: spamassassin

type spamassassin_exec_t, file_type, sysadmfile, exec_type;

# Everything else is in spamassassin_macros.te.

#DESC Spamc - Spamassassin client
#
# Author: Colin Walters <[email protected]>
# X-Debian-Packages: spamc
#

type spamc_exec_t, file_type, sysadmfile, exec_type;

# Everything else is in spamassassin_macros.te.

#DESC Spamd - Spamassassin daemon
#
# Author: Colin Walters <[email protected]>
# X-Debian-Packages: spamassassin
#

daemon_domain(spamd)

tmp_domain(spamd)
allow spamd_t tmp_t:dir { getattr read };

type spamd_port_t, port_type;
allow spamd_t spamd_port_t:tcp_socket name_bind;

general_domain_access(spamd_t)
base_file_read_access(spamd_t)
normal_config_file_read_access(spamd_t)
uses_shlib(spamd_t)

# Various Perl bits
allow spamd_t lib_t:file rx_file_perms;
dontaudit spamd_t { sysctl_t sysctl_kernel_t }:dir search; dontaudit spamd_t { shadow_t }:file read; dontaudit spamd_t sysadm_devpts_t:chr_file { read write }; dontaudit spamd_t initrc_var_run_t:file { read write lock };

can_network(spamd_t)
allow spamd_t self:capability { net_bind_service };

# Spamassassin, when run as root and using per-user config files,

# setuids to the user running spamc.  Comment this if you are not
# using this ability.
allow spamd_t self:capability { setuid setgid dac_override dac_read_search };
macros/user_macros.te +1 -0
@@ -155,6 +155,7 @@
 ifdef(`crontab.te', `crontab_domain($1)')
 ifdef(`ssh.te', `ssh_domain($1)')
 ifdef(`irc.te', `irc_domain($1)')
+ifdef(`using_spamassassin', `spamassassin_domain($1)')
 ifdef(`uml.te', `uml_domain($1)')
 ifdef(`clamav.te', `user_clamscan_domain($1)')
 ifdef(`fingerd.te', `fingerd_macro($1)')
net_contexts +1 -0
@@ -75,6 +75,7 @@
 portcon udp 5323 system_u:object_r:imaze_port_t
 ')
 ifdef(`ircd.te', `portcon tcp 6667 system_u:object_r:ircd_port_t')
+ifdef(`spamd.te', `portcon tcp 783 system_u:object_r:spamd_port_t')
 ifdef(`apache.te', `define(`use_http_cache')')
 ifdef(`squid.te', `define(`use_http_cache')')
 ifdef(`use_http_cache', `portcon tcp 8080  system_u:object_r:http_cache_port_t')
#1 lore raw
Quoted 7 lines · Colin Walters

Attached is a first attempt at a spamassassin policy. It is not going to be sufficient for most typical users though, because we don't currently have a clean way to transition from procmail_t to e.g. user_spamc_t.

Russell and I discussed this issue on IRC last night, and he was of the opinion that we should create a shell script wrapper for procmail which

I was thinking of a wrapper written in C which is compiled. Do we even have enough utility programs to allow such things to be written in shell scripts?

Quoted 5 lines

ifdef(procmail.te', domain_auto_trans($1_procmail_t, spamc_exec_t, $1_spamc_t) ')
in spamassassin_macros.te.

Quoted 7 lines

One other issue I ran into; what's a good way to specify that a program may interact with the user? Right now I'm doing:

allow $1_$2_t privfd:fd use;
allow $1_$2_t userpty_type:chr_file rw_file_perms;

But this seems a bit unclean. Any suggestions?

When you have the wrapper as discussed you just need the following:
allow $1_$2_t privfd:fd use;
allow $1_$2_t { $1_devpts_t $1_tty_device_t }:chr_file rw_file_perms;

Also another possibility is for the wrapper program to change the type of the terminal device in a similar manner to newrole and then change it back after the program is complete. Then the program can't run amok on terminals from other sessions by the same user.

tmp_domain(spamd)
allow spamd_t tmp_t:dir { getattr read };
The second line should not be needed, the first line should do it.

# Note: most of this should really be in a generic macro like # base_user_program($1, foo)

Good idea. Please send me a patch and convert some of the policy to using it as an example. ;)

file_type_auto_trans($1, $2_home_dir_t, $2_home_spamassassin_t) create_dir_file($1, $2_home_spamassassin_t)

The first line does everything that the second line does. Also consider whether you need the full capabilities of the file_type_auto_trans() macro, does spamassasin really need to create sockets under the user home directory? Maybe the following will do:
file_type_auto_trans($1, $2_home_dir_t, $2_home_spamassassin_t, file)

I've put spamd.te in my tree.

Signature · 10 lines
http://www.coker.com.au/selinux/   My NSA Security Enhanced Linux packages
http://www.coker.com.au/bonnie++/  Bonnie++ hard drive benchmark
http://www.coker.com.au/postal/    Postal SMTP/POP benchmark
http://www.coker.com.au/~russell/  My home page


--
This message was distributed to subscribers of the selinux mailing list.
If you no longer wish to subscribe, send mail to [email protected] with
the words "unsubscribe selinux" without quotes as the message.
#2 lore raw
Quoted 1 line · Russell Coker

I was thinking of a wrapper written in C which is compiled.

That would make more sense, yeah.

Quoted 2 lines

Do we even have
enough utility programs to allow such things to be written in shell scripts?

I guess I was mainly thinking of "runas", but we might need more than that.

Quoted 3 lines

When you have the wrapper as discussed you just need the following:
allow $1_$2_t privfd:fd use;
allow $1_$2_t { $1_devpts_t $1_tty_device_t }:chr_file rw_file_perms;

Ok, I've done that in my tree.

Quoted 4 lines

Also another possibility is for the wrapper program to change the type of the terminal device in a similar manner to newrole and then change it back after the program is complete. Then the program can't run amok on terminals from other sessions by the same user.

I dislike this idea; it's OK for newrole because newrole kind of takes over your terminal with the password prompt and everything. But it would be reasonable to run spamassassin and something else simultaneously.

Quoted 3 lines

tmp_domain(spamd)
allow spamd_t tmp_t:dir { getattr read };
The second line should not be needed, the first line should do it.

Ok, hm...I think it wasn't working for me before, but it appears to be now; perhaps I picked up a fix in a merge with your tree.

Quoted 5 lines

# Note: most of this should really be in a generic macro like # base_user_program($1, foo)

Good idea. Please send me a patch and convert some of the policy to using it as an example. ;)

Heh. There are a number of things I want to do first...but it should go on the TODO list.

Quoted 8 lines

file_type_auto_trans($1, $2_home_dir_t, $2_home_spamassassin_t) create_dir_file($1, $2_home_spamassassin_t)

The first line does everything that the second line does. Also consider whether you need the full capabilities of the file_type_auto_trans() macro, does spamassasin really need to create sockets under the user home directory? Maybe the following will do:
file_type_auto_trans($1, $2_home_dir_t, $2_home_spamassassin_t, file)

I don't think that's enough, because I want it to be able to create the ~/.spamassassin directory too.

Quoted 1 line

I've put spamd.te in my tree.

Cool.

--
This message was distributed to subscribers of the selinux mailing list. If you no longer wish to subscribe, send mail to [email protected] with the words "unsubscribe selinux" without quotes as the message.

#3 lore raw
Quoted 6 lines · Colin Walters
Quoted 3 lines

tmp_domain(spamd)
allow spamd_t tmp_t:dir { getattr read };
The second line should not be needed, the first line should do it.

Ok, hm...I think it wasn't working for me before, but it appears to be now; perhaps I picked up a fix in a merge with your tree.

You probably added the second line first, and then added the tmp_domain() entry later. I've done that a few times myself.

Quoted 11 lines
Quoted 8 lines

file_type_auto_trans($1, $2_home_dir_t, $2_home_spamassassin_t) create_dir_file($1, $2_home_spamassassin_t)

The first line does everything that the second line does. Also consider whether you need the full capabilities of the file_type_auto_trans() macro, does spamassasin really need to create sockets under the user home directory? Maybe the following will do:
file_type_auto_trans($1, $2_home_dir_t, $2_home_spamassassin_t, file)

I don't think that's enough, because I want it to be able to create the ~/.spamassassin directory too.

I've been thinking of writing a macro that would just allow creation of a directory or a file under a particular directory with a type change.

Wanting to create a directory or a file is a really common operation so it makes sense for it to be easy to allow it without allowing other things.

Signature · 10 lines
http://www.coker.com.au/selinux/   My NSA Security Enhanced Linux packages
http://www.coker.com.au/bonnie++/  Bonnie++ hard drive benchmark
http://www.coker.com.au/postal/    Postal SMTP/POP benchmark
http://www.coker.com.au/~russell/  My home page


--
This message was distributed to subscribers of the selinux mailing list.
If you no longer wish to subscribe, send mail to [email protected] with
the words "unsubscribe selinux" without quotes as the message.