hda: dma_timer_expiry: dma status == 0x60
Hi
Using hdparm with this options
hdparm -k1 -d1 -u1 -c1 -a8 -m16 -X udma2 /dev/hda
I obtain this
blk: queue c02fb11c, I/O limit 4095Mb (mask 0xffffffff)
hda: channel busy
hda: dma_timer_expiry: dma status == 0x60
hda: DMA timeout retry
hda: timeout waiting for DMA
hda: status error: status=0x58 { DriveReady SeekComplete DataRequest }
hda: drive not ready for command
hda: status timeout: status=0xd0 { Busy }
hdb: DMA disabled
hda: no DRQ after issuing MULTWRITE
ide0: reset: success
blk: queue c02fb11c, I/O limit 4095Mb (mask 0xffffffff)
hda: CHECK for good STATUS
Some information of my system
Linux debian 2.6.0-test2 #2 Sun Jul 27 21:18:34 CEST 2003 i586 GNU/Linux
Gnu C 3.3.1 Gnu make 3.80 util-linux 2.11z mount 2.11z e2fsprogs 1.34 Linux C Library 2.3.2 Dynamic linker (ldd) 2.3.2 Procps 3.1.11 Net-tools 1.60 Console-tools 0.2.3 Sh-utils 5.0 Modules Loaded r128 snd_seq_midi snd_seq_oss snd_seq_midi_event
snd_seq snd_pcm_oss snd_mixer_oss snd_ens1371 snd_rawmidi snd_seq_device snd_pcm snd_page_alloc snd_timer snd_ac97_codec snd ipt_REDIRECT iptable_nat ipt_state ip_conntrack iptable_filter ip_tables uhci_hcd usbcore 8139too mii crc32 ide_cd cdrom
And my hardware
cat /proc/via:
----------VIA BusMastering IDE Configuration----------------
Driver Version: 3.37 South Bridge: VIA vt82c586b Revision: ISA 0x47 IDE 0x6 Highest DMA rate: UDMA33 BM-DMA base: 0xe000 PCI clock: 33.3MHz Master Read Cycle IRDY: 1ws Master Write Cycle IRDY: 1ws BM IDE Status Register Read Retry: yes Max DRDY Pulse Width: No limit -----------------------Primary IDE-------Secondary IDE------ Read DMA FIFO flush: yes yes End Sector FIFO flush: no no Prefetch Buffer: yes yes Post Write Buffer: yes no Enabled: yes yes Simplex only: no no Cable Type: 40w 40w -------------------drive0----drive1----drive2----drive3----- Transfer Mode: UDMA PIO DMA UDMA Address Setup: 30ns 30ns 30ns 30ns Cmd Active: 90ns 90ns 90ns 90ns Cmd Recovery: 30ns 30ns 30ns 30ns Data Active: 90ns 90ns 90ns 90ns Data Recovery: 30ns 30ns 30ns 30ns Cycle Time: 60ns 120ns 120ns 60ns Transfer Rate: 33.3MB/s 16.6MB/s 16.6MB/s 33.3MB/s
Processor
processor : 0vendor_id : AuthenticAMD
cpu family : 5
model : 8
model name : AMD-K6(tm) 3D processor
stepping : 12
cpu MHz : 451.191
cache size : 64 KBfdiv_bug : nohlt_bug : nof00f_bug : nocoma_bug : no
fpu : yesfpu_exception : yes
cpuid level : 1
wp : yes
flags : fpu vme de pse tsc msr mce cx8 pge mmx syscall 3dnowk6_mtrr
bogomips : 888.83
/proc/ioports
0000-001f : dma1
0020-0021 : pic1
0040-005f : timer
0060-006f : keyboard
0070-0077 : rtc
0080-008f : dma page reg
00a0-00a1 : pic2
00c0-00df : dma2
00f0-00ff : fpu
0170-0177 : ide1
01f0-01f7 : ide0
02f8-02ff : serial
0376-0376 : ide1
03c0-03df : vga+
03f6-03f6 : ide0
03f8-03ff : serial
0cf8-0cff : PCI conf1
4000-40ff : VIA Technologies, In VT82C586B ACPI d000-dfff : PCI Bus #01
d000-d0ff : ATI Technologies Inc Rage 128 PF/PRO AGP
e000-e00f : VIA Technologies, In VT82C586/B/686A/B PI
e000-e007 : ide0
e008-e00f : ide1
e400-e41f : VIA Technologies, In USB
e400-e41f : uhci-hcd
e800-e8ff : Realtek Semiconducto RTL-8139/8139C/8139C
e800-e8ff : 8139too
ec00-ec3f : Ensoniq ES1371 [AudioPCI-97]
ec00-ec3f : Ensoniq AudioPCI
Signature · 4 lines
Ramón Rey Vicente <ramon dot rey at hispalinux dot es>
jabber ID <rreylinux at jabber dot org>
------------------------------------------------------------
gpg public key ID 0xBEBD71D5 # http://pgp.escomposlinux.org/