Coolmax HD-211-COMBO with Prolific PL3507 chipset
Greetings.
I recently purchased a USB2+Firewire 2.5" portable harddrive enclosure. The enclosure is from Coolmax and is a HD-211-COMBO. The chipset is a Firewire and USB2 all-in-one deal called PL3507 from Prolific. I've read a bit about this chipset and few people (who are talking, at least) seem to have much success with it. I am strongly considering returning the enclosure for a refund.
I have been able to get it to be detected and work on just one machine running Linux; an IBM xSeries 206 server running Fedora Core 2 (kernel 2.6.5). The device is rarely detected, but when it is, it seems to use the EHCI driver and it works fine until you unplug it and try to plug it back in. This behavior is not only limited to Linux, though. I have found just one Windows machine so far that detects it fine even if it is unplugged and plugged back in.
So, while I'm very likely going to make use of Newegg's 30-day money-back guarantee, I thought I'd try to help the community out however I can. Not everyone has the luxury of being able to return their hardware for a refund. So if I can help someone who is developing a driver by testing it, I'd like to do that. If anyone has any drivers that they are writing that might help to make this device work on Linux, I would be happy to be a guinea pig for your project.
The desktop system I have access to is running kernel 2.4.18, so that would likely not be of any help. However, I installed 2.6.8.1 on my Gateway Solo 2500 laptop (to no avail), so I can help with that kernel. The USB ports on that machine are v1.1 only. I, unfortunately, have no systems with USB2 or Firewire that are running Linux.
Unfortunately, my skills do not permit me to be a driver designer. What I can do (and what I'm offering to do) is to test drivers for people who need things tested.
So, if anyone has a need for help testing drivers for the PL3507 chipset, let me know.
Thank you.
-Andy
[email protected]
Quoted 9 lines · Andrew Haninger
Greetings.
I recently purchased a USB2+Firewire 2.5" portable harddrive enclosure. The enclosure is from Coolmax and is a HD-211-COMBO. The chipset is a Firewire and USB2 all-in-one deal called PL3507 from Prolific. I've read a bit about this chipset and few people (who are talking, at least) seem to have much success with it. I am strongly considering returning the enclosure for a refund.
Data point:
I use an ACOM portable drive that (I'm fairly sure) uses the same USB/Firewire interface chip-set.
It sometimes has trouble being discovered on my COMPAQ Presario Lap-top using USB, and sometimes has the same trouble on Firewire using Linux-2.4.26 drivers. But once it is mounted on either systems I don't have any trouble.
[SNIPPED...]
Cheers,
Dick Johnson
Penguin : Linux version 2.4.26 on an i686 machine (5570.56 BogoMips).
Note 96.31% of all statistics are fiction.
Andrew> I recently purchased a USB2+Firewire 2.5" portable harddrive Andrew> enclosure. The enclosure is from Coolmax and is a Andrew> HD-211-COMBO. The chipset is a Firewire and USB2 all-in-one Andrew> deal called PL3507 from Prolific. I've read a bit about this Andrew> chipset and few people (who are talking, at least) seem to Andrew> have much success with it. I am strongly considering returning Andrew> the enclosure for a refund.
Return it. I've got a Prolific chipset enclosure and I can't make it work properly under either Linux of my wife's Windows 2000 box. I paid's my money and took's my chances. I'm a sucker.
Andrew> I have been able to get it to be detected and work on just one Andrew> machine running Linux; an IBM xSeries 206 server running Andrew> Fedora Core 2 (kernel 2.6.5). The device is rarely detected, Andrew> but when it is, it seems to use the EHCI driver and it works Andrew> fine until you unplug it and try to plug it back in. This Andrew> behavior is not only limited to Linux, though. I have found Andrew> just one Windows machine so far that detects it fine even if Andrew> it is unplugged and plugged back in.
Detection was never the problem for me under either Linux or Windows, it was that if you started writing data to it, it would choke and hang completely. You could run badblocks on the device without problems, do a mkfs as well. No problem. Just try to write too much data (or as I suspect in too large chunks) and it just wigged out and locked up the drive. At least under firewire it didn't take down the box.
It didn't work much better under USB2.0 (linux only testing though) since it would write more data, but it would completely hang the system.
Andrew> So, while I'm very likely going to make use of Newegg's 30-day Andrew> money-back guarantee, I thought I'd try to help the community Andrew> out however I can. Not everyone has the luxury of being able Andrew> to return their hardware for a refund. So if I can help Andrew> someone who is developing a driver by testing it, I'd like to Andrew> do that. If anyone has any drivers that they are writing that Andrew> might help to make this device work on Linux, I would be happy Andrew> to be a guinea pig for your project.
The only thing I've seen which I haven't had time to work on yet, thanks to a two year old little boy, is to take the iee1394 drives from the 2.6.2 kernel and move them forward to the 2.6.8 kernel. Some people have reported success with the sbp2 driver in that case.
In my case, I suspect that the prolific chipset sucks rocks.
John
John Stoffel - Senior Unix Systems Administrator - Lucent Technologies
[email protected] - http://www.lucent.com - 978-952-7548