Compiling module-init-tools versions after v3.0
Hello.
I'm trying to upgrade one of my machines to module-init-tools-3.2-pre8 so that I can better assist a driver developer in debugging some issues with the OPL3SA2 driver from ALSA.
The machine is currently running a slightly-modified Slackware 9.1 distribution (I've updated several packages to support the 2.6 kernel and other upgrades since the first install). I currently have module-init-tools 3.0 installed but I'd like to install version 3.2-pre8.
The problem is that compiling module-init-tools versions after 3.0 seem require docbook-utils (the compile fails on a docbook2man operation) to be installed and docbook-utils requires jade which will not compile. I found one jade package called jade-1.2.1 (from '98 or '99) which will not compile. I tried openjade, but it does not seem to work when compiling docbook-tools (I made a symlink from the openjade binary to "jade").
Is there some other package that I'm overlooking that's required to get docbook-utils installed? If not, how have other people compiled and installed newer versions of module-init-tools?
Thanks.
-Andy
Quoted 1 line · Andrew Haninger
Hello.
Hi Andrew,
Quoted 18 lines
I'm trying to upgrade one of my machines to module-init-tools-3.2-pre8 so that I can better assist a driver developer in debugging some issues with the OPL3SA2 driver from ALSA.
The machine is currently running a slightly-modified Slackware 9.1 distribution (I've updated several packages to support the 2.6 kernel and other upgrades since the first install). I currently have module-init-tools 3.0 installed but I'd like to install version 3.2-pre8.
The problem is that compiling module-init-tools versions after 3.0 seem require docbook-utils (the compile fails on a docbook2man operation) to be installed and docbook-utils requires jade which will not compile. I found one jade package called jade-1.2.1 (from '98 or '99) which will not compile. I tried openjade, but it does not seem to work when compiling docbook-tools (I made a symlink from the openjade binary to "jade").
Quoted 3 lines
Is there some other package that I'm overlooking that's required to get docbook-utils installed? If not, how have other people compiled and installed newer versions of module-init-tools?
Workaround:
Remove the
man_MANS = $(MAN5) $(MAN8)
line in Makefile.in before running configure.
But this could be better handled in module-init-tools.
Quoted 3 lines
Thanks.
-Andy
cu
Adrian
Signature · 4 lines
"Is there not promise of rain?" Ling Tan asked suddenly out
of the darkness. There had been need of rain for many days.
"Only a promise," Lao Er said.
Pearl S. Buck - Dragon SeedQuoted 7 lines · Adrian Bunk
Workaround:
Remove the
man_MANS = $(MAN5) $(MAN8)line in Makefile.in before running configure.
Quoted 2 lines · Ken Moffat
per LFS (http://www.linuxfromscratch.org/lfs/) make DOCBOOKTOMAN=""
(or look at BLFS for the gory details of docbook)
Thank you both. Both of those workarounds seem to work for now.
Quoted 1 line
But this could be better handled in module-init-tools.
Here's hoping it will be once 3.2 is released.
Thanks again.
-Andy
Quoted 7 lines · Andrew Haninger
Quoted 1 line · Adrian Bunk
But this could be better handled in module-init-tools.
Here's hoping it will be once 3.2 is released.
Thanks again.
-Andy
Thanks for this report! This is the first I've heard of it (Adam CC'd me, thanks!).
Turns out the "docbook2man" uses the *last* <refentrytitle> as the output filename, so it was building "modprobe.d.5" instead of "modprobe.conf.5". As a result, modprobe.conf.5 was always old, even in the tarball I uploaded for 3.1 (when the second refentrytitle went into the man page), and every "make" tried to rebuild it.
Release coming,
Rusty.
Signature · 1 line
A bad analogy is like a leaky screwdriver -- Richard Braakman
Quoted 9 lines · Andrew Haninger
The problem is that compiling module-init-tools versions after 3.0 seem require docbook-utils (the compile fails on a docbook2man operation) to be installed and docbook-utils requires jade which will not compile. I found one jade package called jade-1.2.1 (from '98 or '99) which will not compile. I tried openjade, but it does not seem to work when compiling docbook-tools (I made a symlink from the openjade binary to "jade").
per LFS (http://www.linuxfromscratch.org/lfs/) make DOCBOOKTOMAN=""
(or look at BLFS for the gory details of docbook)
Ken
Signature · 1 line
das eine Mal als Tragödie, das andere Mal als Farce