Skip to contentSkip to conversation

Cmdline partitions

DISCUSSION Jonas Larsson 1 participant 1 message Aug 11, 2003 Memory technology devices (MTD)

lore
Share & tools
lore
#0 lore raw

Hi all. I've had some trouble creating my mtd partitions with the 2.6.0-test2 kernel and I need some advice. I have my own mapping driver for our board (not submitted yet) which is based on the dc21285 map driver.

In the 2.5.70-rmk1 kernel I call parse_cmdline_partitions with mtd_id="mymapdriver", and specify mtdparts=mymapdriver:<partitions> to the kernel. In 2.6.0-test2-rmk1 I have to call parse_mtd_partitions to parse the cmdline. However I cannot specify my mtd_id from the map driver (except setting the .name member of my map_info struct) as I could with 2.5.70. This makes the line

if ((!mtd_id) || (!strcmp(part->mtd_id, mtd_id)))

in cmdlinepart.c:parse_cmdline_partitions() to fail.

The edb7312 map driver calls parse_mtd_partitions like this:
mtd_parts_nb = parse_mtd_partitions(mymtd, probes, &mtd_parts, "edb7312-nor");

But the 4th arg (origin) is a unsigned long and as I can see is not used by the implementation of the function. Is this really the way it is supposed to be?

Comments?

/ Jonas