linux 2.4.X and Rocket 1540 SATA
Hello,
I'm trying to get a HighPoint Rocket SATA (4 port) card working with kernel 2.4.X. Currently it hangs just after detecting hdc (IDE cdrom). If I append hdg=noprobe hdi=noprobe, etc the box boots fine, but the SATA drives are no where to be found. I'm currently using 2.4.22-ac1 to support the onboard intel SATA which works fine.
I'm not sure what other information you'd need to help me debug this, but I'm willing to provide whatever is needed.
Thanks,
Dale
Quoted 11 lines · Dale Blount
Hello,
I'm trying to get a HighPoint Rocket SATA (4 port) card working with kernel 2.4.X. Currently it hangs just after detecting hdc (IDE cdrom). If I append hdg=noprobe hdi=noprobe, etc the box boots fine, but the SATA drives are no where to be found. I'm currently using 2.4.22-ac1 to support the onboard intel SATA which works fine.
I'm not sure what other information you'd need to help me debug this, but I'm willing to provide whatever is needed.
I hate to reply to myself, but I've realized more information may be needed. The HPT card uses the hpt374 chip (ATA chipset that has had linux support for at least a year or so). I've also tried disabling the onboard PATA ports (incase they are stomping on ideX) with no success. I noticed in the kernel config help that the hpt366 driver requires "ide-probe" during boot, which is probably why noprobe lets the boot-process continue but kills the drive's access.
This is the last line in the boot process when it hangs:
hdc: ATAPI 52X CD-ROM drive, 120kB Cache, DMA
Is there anyway to figure out why this card doesn't work?
Thanks again,
Dale
Quoted 9 lines
Thanks,
Dale
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/