Need fixing of a rebooting system
Hey,
I compiled 2.6.0-test5 today and installed it with a basic make
install. This was a bz2 based kernel. Unfortunately, just after the kernel is uncompressed at bootup, the system reboots. What can I do to start fixing this?
Thanks
Kevin Breit
Quoted 5 lines · Kevin Breit
Hey,
I compiled 2.6.0-test5 today and installed it with a basic make
install. This was a bz2 based kernel. Unfortunately, just after the kernel is uncompressed at bootup, the system reboots. What can I do to start fixing this?
Please verify your processor type in the configuration.
Thanks,
Zwane
Quoted 12 lines · Zwane Mwaikambo
Quoted 7 lines · Kevin Breit
Hey,
I compiled 2.6.0-test5 today and installed it with a basic make
install. This was a bz2 based kernel. Unfortunately, just after the kernel is uncompressed at bootup, the system reboots. What can I do to start fixing this?
Quoted 3 lines
Please verify your processor type in the configuration.
I set the CPU type to PII/Celeron and recompiled. It was at PIII/Celeron but it still won't work. It is still rebooting.
Kevin
Quoted 2 lines · Kevin Breit
I set the CPU type to PII/Celeron and recompiled. It was at PIII/Celeron but it still won't work. It is still rebooting.
Please send your .config and a dmesg from a working kernel.
Thanks
Quoted 6 lines · Zwane Mwaikambo
Quoted 2 lines · Kevin Breit
I set the CPU type to PII/Celeron and recompiled. It was at PIII/Celeron but it still won't work. It is still rebooting.
Please send your .config and a dmesg from a working kernel.
The files should be attached. If they aren't, please let me know!
Thanks for your help.
Kevin Breit
#
# Automatically generated make config: don't edit
#CONFIG_X86=yCONFIG_MMU=yCONFIG_UID16=yCONFIG_GENERIC_ISA_DMA=y
#
# Code maturity level options
#CONFIG_EXPERIMENTAL=yCONFIG_CLEAN_COMPILE=yCONFIG_STANDALONE=yCONFIG_BROKEN_ON_SMP=y
#
# General setup
#CONFIG_SWAP=yCONFIG_SYSVIPC=yCONFIG_BSD_PROCESS_ACCT=yCONFIG_SYSCTL=yCONFIG_LOG_BUF_SHIFT=14
# CONFIG_IKCONFIG is not set
# CONFIG_EMBEDDED is not setCONFIG_KALLSYMS=yCONFIG_FUTEX=yCONFIG_EPOLL=yCONFIG_IOSCHED_NOOP=yCONFIG_IOSCHED_AS=yCONFIG_IOSCHED_DEADLINE=y
#
# Loadable module support
#
# CONFIG_MODULES is not set
#
# Processor type and features
#CONFIG_X86_PC=y
# CONFIG_X86_VOYAGER is not set
# CONFIG_X86_NUMAQ is not set
# CONFIG_X86_SUMMIT is not set
# CONFIG_X86_BIGSMP is not set
# CONFIG_X86_VISWS is not set
# CONFIG_X86_GENERICARCH is not set
# CONFIG_X86_ES7000 is not set
# CONFIG_M386 is not set
# CONFIG_M486 is not set
# CONFIG_M586 is not set
# CONFIG_M586TSC is not set
# CONFIG_M586MMX is not set
# CONFIG_M686 is not setCONFIG_MPENTIUMII=y
# CONFIG_MPENTIUMIII is not set
# CONFIG_MPENTIUM4 is not set
# CONFIG_MK6 is not set
# CONFIG_MK7 is not set
# CONFIG_MK8 is not set
# CONFIG_MELAN is not set
# CONFIG_MCRUSOE is not set
# CONFIG_MWINCHIPC6 is not set
# CONFIG_MWINCHIP2 is not set
# CONFIG_MWINCHIP3D is not set
# CONFIG_MCYRIXIII is not set
# CONFIG_MVIAC3_2 is not set
# CONFIG_X86_GENERIC is not setCONFIG_X86_CMPXCHG=yCONFIG_X86_XADD=yCONFIG_X86_L1_CACHE_SHIFT=5CONFIG_RWSEM_XCHGADD_ALGORITHM=yCONFIG_X86_WP_WORKS_OK=yCONFIG_X86_INVLPG=yCONFIG_X86_BSWAP=yCONFIG_X86_POPAD_OK=yCONFIG_X86_GOOD_APIC=yCONFIG_X86_INTEL_USERCOPY=yCONFIG_X86_USE_PPRO_CHECKSUM=y
# CONFIG_HUGETLB_PAGE is not set
# CONFIG_HPET_TIMER is not set
# CONFIG_HPET_EMULATE_RTC is not set
# CONFIG_SMP is not setCONFIG_PREEMPT=y
# CONFIG_X86_UP_APIC is not setCONFIG_X86_TSC=yCONFIG_X86_MCE=y
# CONFIG_X86_MCE_NONFATAL is not set
# CONFIG_TOSHIBA is not set
# CONFIG_I8K is not setCONFIG_MICROCODE=yCONFIG_X86_MSR=yCONFIG_X86_CPUID=yCONFIG_EDD=y
# CONFIG_NOHIGHMEM is not setCONFIG_HIGHMEM4G=y
# CONFIG_HIGHMEM64G is not setCONFIG_HIGHMEM=y
# CONFIG_HIGHPTE is not set
# CONFIG_MATH_EMULATION is not setCONFIG_MTRR=yCONFIG_HAVE_DEC_LOCK=y
#
# Power management options (ACPI, APM)
#CONFIG_PM=yCONFIG_SOFTWARE_SUSPEND=y
#
# ACPI (Advanced Configuration and Power Interface) Support #CONFIG_ACPI_HT=yCONFIG_ACPI=yCONFIG_ACPI_BOOT=yCONFIG_ACPI_SLEEP=yCONFIG_ACPI_SLEEP_PROC_FS=yCONFIG_ACPI_AC=yCONFIG_ACPI_BATTERY=yCONFIG_ACPI_BUTTON=yCONFIG_ACPI_FAN=yCONFIG_ACPI_PROCESSOR=yCONFIG_ACPI_THERMAL=y
# CONFIG_ACPI_ASUS is not set
# CONFIG_ACPI_TOSHIBA is not set
# CONFIG_ACPI_DEBUG is not setCONFIG_ACPI_BUS=yCONFIG_ACPI_INTERPRETER=yCONFIG_ACPI_EC=yCONFIG_ACPI_POWER=yCONFIG_ACPI_PCI=yCONFIG_ACPI_SYSTEM=y
#
# APM (Advanced Power Management) BIOS Support
#
# CONFIG_APM is not set
#
# CPU Frequency scaling
#
# CONFIG_CPU_FREQ is not set
#
# Bus options (PCI, PCMCIA, EISA, MCA, ISA)
#CONFIG_PCI=y
# CONFIG_PCI_GOBIOS is not set
# CONFIG_PCI_GODIRECT is not setCONFIG_PCI_GOANY=yCONFIG_PCI_BIOS=yCONFIG_PCI_DIRECT=y
# CONFIG_PCI_LEGACY_PROC is not setCONFIG_PCI_NAMES=y
# CONFIG_ISA is not set
# CONFIG_MCA is not set
# CONFIG_SCx200 is not setCONFIG_HOTPLUG=y
#
# PCMCIA/CardBus support
#CONFIG_PCMCIA=y
# CONFIG_YENTA is not set
# CONFIG_I82092 is not set
# CONFIG_TCIC is not set
#
# PCI Hotplug Support
#
# CONFIG_HOTPLUG_PCI is not set
#
# Executable file formats
#CONFIG_BINFMT_ELF=yCONFIG_BINFMT_AOUT=yCONFIG_BINFMT_MISC=y
#
# Generic Driver Options
#
# CONFIG_FW_LOADER is not set
#
# Memory Technology Devices (MTD)
#
# CONFIG_MTD is not set
#
# Parallel port support
#CONFIG_PARPORT=yCONFIG_PARPORT_PC=y
# CONFIG_PARPORT_PC_FIFO is not set
# CONFIG_PARPORT_PC_SUPERIO is not setCONFIG_PARPORT_PC_PCMCIA=y
# CONFIG_PARPORT_OTHER is not setCONFIG_PARPORT_1284=y
#
# Plug and Play support
#CONFIG_PNP=y
# CONFIG_PNP_DEBUG is not set
#
# Protocols
#CONFIG_ISAPNP=yCONFIG_PNPBIOS=y
#
# Block devices
#CONFIG_BLK_DEV_FD=yCONFIG_PARIDE=yCONFIG_PARIDE_PARPORT=y
#
# Parallel IDE high-level drivers
#CONFIG_PARIDE_PD=yCONFIG_PARIDE_PCD=yCONFIG_PARIDE_PF=y
# CONFIG_PARIDE_PT is not setCONFIG_PARIDE_PG=y
#
# Parallel IDE protocol modules
#
# CONFIG_PARIDE_ATEN is not set
# CONFIG_PARIDE_BPCK is not set
# CONFIG_PARIDE_BPCK6 is not set
# CONFIG_PARIDE_COMM is not set
# CONFIG_PARIDE_DSTR is not set
# CONFIG_PARIDE_FIT2 is not set
# CONFIG_PARIDE_FIT3 is not set
# CONFIG_PARIDE_EPAT is not set
# CONFIG_PARIDE_EPIA is not set
# CONFIG_PARIDE_FRIQ is not set
# CONFIG_PARIDE_FRPW is not set
# CONFIG_PARIDE_KBIC is not set
# CONFIG_PARIDE_KTTI is not set
# CONFIG_PARIDE_ON20 is not set
# CONFIG_PARIDE_ON26 is not set
# CONFIG_BLK_CPQ_DA is not set
# CONFIG_BLK_CPQ_CISS_DA is not set
# CONFIG_BLK_DEV_DAC960 is not set
# CONFIG_BLK_DEV_UMEM is not setCONFIG_BLK_DEV_LOOP=y
# CONFIG_BLK_DEV_CRYPTOLOOP is not setCONFIG_BLK_DEV_NBD=yCONFIG_BLK_DEV_RAM=yCONFIG_BLK_DEV_RAM_SIZE=4096CONFIG_BLK_DEV_INITRD=y
# CONFIG_LBD is not set
#
# ATA/ATAPI/MFM/RLL support
#CONFIG_IDE=yCONFIG_BLK_DEV_IDE=y
#
# Please see Documentation/ide.txt for help/info on IDE drives #
# CONFIG_BLK_DEV_HD_IDE is not set CONFIG_BLK_DEV_IDEDISK=yCONFIG_IDEDISK_MULTI_MODE=y
# CONFIG_IDEDISK_STROKE is not set CONFIG_BLK_DEV_IDECS=yCONFIG_BLK_DEV_IDECD=y
# CONFIG_BLK_DEV_IDETAPE is not set CONFIG_BLK_DEV_IDEFLOPPY=yCONFIG_BLK_DEV_IDESCSI=y
# CONFIG_IDE_TASK_IOCTL is not set
# CONFIG_IDE_TASKFILE_IO is not set
#
# IDE chipset support/bugfixes
#
# CONFIG_BLK_DEV_CMD640 is not setCONFIG_BLK_DEV_IDEPNP=yCONFIG_BLK_DEV_IDEPCI=yCONFIG_IDEPCI_SHARE_IRQ=y
# CONFIG_BLK_DEV_OFFBOARD is not setCONFIG_BLK_DEV_GENERIC=y
# CONFIG_BLK_DEV_OPTI621 is not set
# CONFIG_BLK_DEV_RZ1000 is not setCONFIG_BLK_DEV_IDEDMA_PCI=y
# CONFIG_BLK_DEV_IDE_TCQ is not set
# CONFIG_BLK_DEV_IDEDMA_FORCED is not setCONFIG_IDEDMA_PCI_AUTO=y
# CONFIG_IDEDMA_ONLYDISK is not set
# CONFIG_IDEDMA_PCI_WIP is not setCONFIG_BLK_DEV_ADMA=yCONFIG_BLK_DEV_AEC62XX=yCONFIG_BLK_DEV_ALI15X3=y
# CONFIG_WDC_ALI15X3 is not setCONFIG_BLK_DEV_AMD74XX=yCONFIG_BLK_DEV_CMD64X=yCONFIG_BLK_DEV_TRIFLEX=yCONFIG_BLK_DEV_CY82C693=y
# CONFIG_BLK_DEV_CS5520 is not setCONFIG_BLK_DEV_CS5530=yCONFIG_BLK_DEV_HPT34X=yCONFIG_BLK_DEV_HPT366=y
# CONFIG_BLK_DEV_SC1200 is not setCONFIG_BLK_DEV_PIIX=y
# CONFIG_BLK_DEV_NS87415 is not setCONFIG_BLK_DEV_PDC202XX_OLD=y
# CONFIG_PDC202XX_BURST is not setCONFIG_BLK_DEV_PDC202XX_NEW=yCONFIG_PDC202XX_FORCE=yCONFIG_BLK_DEV_SVWKS=yCONFIG_BLK_DEV_SIIMAGE=yCONFIG_BLK_DEV_SIS5513=yCONFIG_BLK_DEV_SLC90E66=y
# CONFIG_BLK_DEV_TRM290 is not setCONFIG_BLK_DEV_VIA82CXXX=yCONFIG_BLK_DEV_IDEDMA=y
# CONFIG_IDEDMA_IVB is not setCONFIG_IDEDMA_AUTO=y
# CONFIG_DMA_NONPCI is not set
# CONFIG_BLK_DEV_HD is not set
#
# SCSI device support
#CONFIG_SCSI=yCONFIG_SCSI_PROC_FS=y
#
# SCSI support type (disk, tape, CD-ROM)
#CONFIG_BLK_DEV_SD=y
# CONFIG_CHR_DEV_ST is not set
# CONFIG_CHR_DEV_OSST is not setCONFIG_BLK_DEV_SR=yCONFIG_BLK_DEV_SR_VENDOR=y
# CONFIG_CHR_DEV_SG is not set
#
# Some SCSI devices (e.g. CD jukebox) support multiple LUNs #
# CONFIG_SCSI_MULTI_LUN is not set CONFIG_SCSI_REPORT_LUNS=y
# CONFIG_SCSI_CONSTANTS is not set CONFIG_SCSI_LOGGING=y
#
# SCSI low-level drivers
#
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_AACRAID is not set
# CONFIG_SCSI_AIC7XXX is not set
# CONFIG_SCSI_AIC7XXX_OLD is not set
# CONFIG_SCSI_AIC79XX is not set
# CONFIG_SCSI_ADVANSYS is not set
# CONFIG_SCSI_MEGARAID is not set
# CONFIG_SCSI_BUSLOGIC is not set
# CONFIG_SCSI_CPQFCTS is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_EATA is not set
# CONFIG_SCSI_EATA_PIO is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
# CONFIG_SCSI_GDTH is not set
# CONFIG_SCSI_IPS is not set
# CONFIG_SCSI_INIA100 is not set
# CONFIG_SCSI_PPA is not set
# CONFIG_SCSI_IMM is not set
# CONFIG_SCSI_SYM53C8XX_2 is not set
# CONFIG_SCSI_QLOGIC_ISP is not set
# CONFIG_SCSI_QLOGIC_FC is not set
# CONFIG_SCSI_QLOGIC_1280 is not set
# CONFIG_SCSI_DC395x is not set
# CONFIG_SCSI_NSP32 is not set
# CONFIG_SCSI_DEBUG is not set
#
# Multi-device support (RAID and LVM)
#
# CONFIG_MD is not set
#
# Fusion MPT device support
#
# CONFIG_FUSION is not set
#
# IEEE 1394 (FireWire) support (EXPERIMENTAL)
#CONFIG_IEEE1394=y
#
# Subsystem Options
#
# CONFIG_IEEE1394_VERBOSEDEBUG is not set
# CONFIG_IEEE1394_OUI_DB is not set
#
# Device Drivers
#
#
# Texas Instruments PCILynx requires I2C bit-banging #CONFIG_IEEE1394_OHCI1394=y
#
# Protocol Drivers
#CONFIG_IEEE1394_VIDEO1394=yCONFIG_IEEE1394_SBP2=yCONFIG_IEEE1394_SBP2_PHYS_DMA=yCONFIG_IEEE1394_ETH1394=yCONFIG_IEEE1394_DV1394=yCONFIG_IEEE1394_RAWIO=yCONFIG_IEEE1394_CMP=yCONFIG_IEEE1394_AMDTP=y
#
# I2O device support
#
# CONFIG_I2O is not set
#
# Networking support
#CONFIG_NET=y
#
# Networking options
#CONFIG_PACKET=yCONFIG_PACKET_MMAP=yCONFIG_NETLINK_DEV=yCONFIG_UNIX=y
# CONFIG_NET_KEY is not setCONFIG_INET=yCONFIG_IP_MULTICAST=yCONFIG_IP_ADVANCED_ROUTER=yCONFIG_IP_MULTIPLE_TABLES=yCONFIG_IP_ROUTE_FWMARK=yCONFIG_IP_ROUTE_NAT=yCONFIG_IP_ROUTE_MULTIPATH=yCONFIG_IP_ROUTE_TOS=yCONFIG_IP_ROUTE_VERBOSE=y
# CONFIG_IP_PNP is not setCONFIG_NET_IPIP=yCONFIG_NET_IPGRE=yCONFIG_NET_IPGRE_BROADCAST=yCONFIG_IP_MROUTE=yCONFIG_IP_PIMSM_V1=yCONFIG_IP_PIMSM_V2=y
# CONFIG_ARPD is not set
# CONFIG_INET_ECN is not setCONFIG_SYN_COOKIES=y
# CONFIG_INET_AH is not set
# CONFIG_INET_ESP is not set
# CONFIG_INET_IPCOMP is not set
#
# IP: Virtual Server Configuration
#
# CONFIG_IP_VS is not set
# CONFIG_IPV6 is not set
# CONFIG_DECNET is not set
# CONFIG_BRIDGE is not setCONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not set
#
# IP: Netfilter Configuration
#CONFIG_IP_NF_CONNTRACK=yCONFIG_IP_NF_FTP=yCONFIG_IP_NF_IRC=y
# CONFIG_IP_NF_TFTP is not set
# CONFIG_IP_NF_AMANDA is not setCONFIG_IP_NF_QUEUE=yCONFIG_IP_NF_IPTABLES=yCONFIG_IP_NF_MATCH_LIMIT=y
# CONFIG_IP_NF_MATCH_IPRANGE is not setCONFIG_IP_NF_MATCH_MAC=yCONFIG_IP_NF_MATCH_PKTTYPE=yCONFIG_IP_NF_MATCH_MARK=yCONFIG_IP_NF_MATCH_MULTIPORT=yCONFIG_IP_NF_MATCH_TOS=y
# CONFIG_IP_NF_MATCH_RECENT is not setCONFIG_IP_NF_MATCH_ECN=yCONFIG_IP_NF_MATCH_DSCP=yCONFIG_IP_NF_MATCH_AH_ESP=yCONFIG_IP_NF_MATCH_LENGTH=yCONFIG_IP_NF_MATCH_TTL=yCONFIG_IP_NF_MATCH_TCPMSS=yCONFIG_IP_NF_MATCH_HELPER=yCONFIG_IP_NF_MATCH_STATE=yCONFIG_IP_NF_MATCH_CONNTRACK=yCONFIG_IP_NF_MATCH_OWNER=yCONFIG_IP_NF_FILTER=yCONFIG_IP_NF_TARGET_REJECT=yCONFIG_IP_NF_NAT=yCONFIG_IP_NF_NAT_NEEDED=yCONFIG_IP_NF_TARGET_MASQUERADE=yCONFIG_IP_NF_TARGET_REDIRECT=y
# CONFIG_IP_NF_TARGET_NETMAP is not set
# CONFIG_IP_NF_TARGET_SAME is not set
# CONFIG_IP_NF_NAT_LOCAL is not setCONFIG_IP_NF_NAT_SNMP_BASIC=yCONFIG_IP_NF_NAT_IRC=yCONFIG_IP_NF_NAT_FTP=yCONFIG_IP_NF_MANGLE=yCONFIG_IP_NF_TARGET_TOS=yCONFIG_IP_NF_TARGET_ECN=yCONFIG_IP_NF_TARGET_DSCP=yCONFIG_IP_NF_TARGET_MARK=y
# CONFIG_IP_NF_TARGET_CLASSIFY is not setCONFIG_IP_NF_TARGET_LOG=yCONFIG_IP_NF_TARGET_ULOG=yCONFIG_IP_NF_TARGET_TCPMSS=yCONFIG_IP_NF_ARPTABLES=yCONFIG_IP_NF_ARPFILTER=y
# CONFIG_IP_NF_ARP_MANGLE is not setCONFIG_XFRM=yCONFIG_XFRM_USER=y
#
# SCTP Configuration (EXPERIMENTAL)
#CONFIG_IPV6_SCTP__=y
# CONFIG_IP_SCTP is not set
# CONFIG_ATM is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_LLC is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_NET_DIVERT is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
# CONFIG_NET_FASTROUTE is not set
# CONFIG_NET_HW_FLOWCONTROL is not set
#
# QoS and/or fair queueing
#
# CONFIG_NET_SCHED is not set
#
# Network testing
#
# CONFIG_NET_PKTGEN is not setCONFIG_NETDEVICES=y
#
# ARCnet devices
#
# CONFIG_ARCNET is not setCONFIG_DUMMY=yCONFIG_BONDING=yCONFIG_EQUALIZER=yCONFIG_TUN=yCONFIG_ETHERTAP=yCONFIG_NET_SB1000=y
#
# Ethernet (10 or 100Mbit)
#CONFIG_NET_ETHERNET=yCONFIG_MII=y
# CONFIG_HAPPYMEAL is not set
# CONFIG_SUNGEM is not set
# CONFIG_NET_VENDOR_3COM is not set
#
# Tulip family network device support
#
# CONFIG_NET_TULIP is not setCONFIG_HP100=yCONFIG_NET_PCI=y
# CONFIG_PCNET32 is not set
# CONFIG_AMD8111_ETH is not set
# CONFIG_ADAPTEC_STARFIRE is not set
# CONFIG_B44 is not set
# CONFIG_DGRS is not setCONFIG_EEPRO100=y
# CONFIG_EEPRO100_PIO is not setCONFIG_E100=y
# CONFIG_FEALNX is not set
# CONFIG_NATSEMI is not set
# CONFIG_NE2K_PCI is not set
# CONFIG_8139CP is not set
# CONFIG_8139TOO is not set
# CONFIG_SIS900 is not set
# CONFIG_EPIC100 is not set
# CONFIG_SUNDANCE is not set
# CONFIG_TLAN is not set
# CONFIG_VIA_RHINE is not set
#
# Ethernet (1000 Mbit)
#
# CONFIG_ACENIC is not set
# CONFIG_DL2K is not set
# CONFIG_E1000 is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_R8169 is not set
# CONFIG_SIS190 is not set
# CONFIG_SK98LIN is not set
# CONFIG_TIGON3 is not set
#
# Ethernet (10000 Mbit)
#
# CONFIG_IXGB is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not setCONFIG_PLIP=yCONFIG_PPP=yCONFIG_PPP_MULTILINK=yCONFIG_PPP_FILTER=y
# CONFIG_PPP_ASYNC is not set
# CONFIG_PPP_SYNC_TTY is not set
# CONFIG_PPP_DEFLATE is not set
# CONFIG_PPP_BSDCOMP is not set
# CONFIG_PPPOE is not set
# CONFIG_SLIP is not set
#
# Wireless LAN (non-hamradio)
#CONFIG_NET_RADIO=y
#
# Obsolete Wireless cards support (pre-802.11)
#CONFIG_STRIP=yCONFIG_PCMCIA_WAVELAN=yCONFIG_PCMCIA_NETWAVE=y
#
# Wireless 802.11 Frequency Hopping cards support
#CONFIG_PCMCIA_RAYCS=y
#
# Wireless 802.11b ISA/PCI cards support
#CONFIG_AIRO=yCONFIG_HERMES=yCONFIG_PLX_HERMES=y
# CONFIG_TMD_HERMES is not setCONFIG_PCI_HERMES=y
#
# Wireless 802.11b Pcmcia/Cardbus cards support
#CONFIG_PCMCIA_HERMES=yCONFIG_AIRO_CS=y
# CONFIG_PCMCIA_ATMEL is not set
# CONFIG_PCMCIA_WL3501 is not setCONFIG_NET_WIRELESS=y
#
# Token Ring devices (depends on LLC=y)
#
# CONFIG_NET_FC is not setCONFIG_RCPCI=yCONFIG_SHAPER=y
#
# Wan interfaces
#
# CONFIG_WAN is not set
#
# PCMCIA network device support
#CONFIG_NET_PCMCIA=yCONFIG_PCMCIA_3C589=yCONFIG_PCMCIA_3C574=yCONFIG_PCMCIA_FMVJ18X=yCONFIG_PCMCIA_PCNET=yCONFIG_PCMCIA_NMCLAN=yCONFIG_PCMCIA_SMC91C92=yCONFIG_PCMCIA_XIRC2PS=yCONFIG_PCMCIA_AXNET=y
#
# Amateur Radio support
#
# CONFIG_HAMRADIO is not set
#
# IrDA (infrared) support
#
# CONFIG_IRDA is not set
#
# ISDN subsystem
#
# CONFIG_ISDN_BOOL is not set
#
# Telephony Support
#
# CONFIG_PHONE is not set
#
# Input device support
#CONFIG_INPUT=y
#
# Userland interfaces
#CONFIG_INPUT_MOUSEDEV=yCONFIG_INPUT_MOUSEDEV_PSAUX=yCONFIG_INPUT_MOUSEDEV_SCREEN_X=1024CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
# CONFIG_INPUT_JOYDEV is not set
# CONFIG_INPUT_TSDEV is not setCONFIG_INPUT_EVDEV=y
# CONFIG_INPUT_EVBUG is not set
#
# Input I/O drivers
#
# CONFIG_GAMEPORT is not setCONFIG_SOUND_GAMEPORT=yCONFIG_SERIO=yCONFIG_SERIO_I8042=yCONFIG_SERIO_SERPORT=y
# CONFIG_SERIO_CT82C710 is not set
# CONFIG_SERIO_PARKBD is not set
# CONFIG_SERIO_PCIPS2 is not set
#
# Input Device Drivers
#CONFIG_INPUT_KEYBOARD=yCONFIG_KEYBOARD_ATKBD=y
# CONFIG_KEYBOARD_SUNKBD is not set
# CONFIG_KEYBOARD_XTKBD is not set
# CONFIG_KEYBOARD_NEWTON is not setCONFIG_INPUT_MOUSE=yCONFIG_MOUSE_PS2=yCONFIG_MOUSE_SERIAL=y
# CONFIG_INPUT_JOYSTICK is not set
# CONFIG_INPUT_TOUCHSCREEN is not set
# CONFIG_INPUT_MISC is not set
#
# Character devices
#CONFIG_VT=yCONFIG_VT_CONSOLE=yCONFIG_HW_CONSOLE=y
# CONFIG_SERIAL_NONSTANDARD is not set
#
# Serial drivers
#
# CONFIG_SERIAL_8250 is not set
#
# Non-8250 serial port support
#CONFIG_UNIX98_PTYS=yCONFIG_UNIX98_PTY_COUNT=2048CONFIG_PRINTER=yCONFIG_LP_CONSOLE=yCONFIG_PPDEV=yCONFIG_TIPAR=y
#
# I2C support
#
# CONFIG_I2C is not set
#
# I2C Hardware Sensors Mainboard support
#
#
# I2C Hardware Sensors Chip support
#
# CONFIG_I2C_SENSOR is not set
#
# Mice
#CONFIG_BUSMOUSE=y
# CONFIG_QIC02_TAPE is not set
#
# IPMI
#
# CONFIG_IPMI_HANDLER is not set
#
# Watchdog Cards
#
# CONFIG_WATCHDOG is not set
# CONFIG_HW_RANDOM is not setCONFIG_NVRAM=yCONFIG_RTC=y
# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not setCONFIG_SONYPI=y
#
# Ftape, the floppy tape device driver
#
# CONFIG_FTAPE is not setCONFIG_AGP=yCONFIG_AGP_ALI=y
# CONFIG_AGP_ATI is not setCONFIG_AGP_AMD=y
# CONFIG_AGP_AMD64 is not setCONFIG_AGP_INTEL=y
# CONFIG_AGP_NVIDIA is not setCONFIG_AGP_SIS=yCONFIG_AGP_SWORKS=yCONFIG_AGP_VIA=yCONFIG_DRM=y
# CONFIG_DRM_TDFX is not set
# CONFIG_DRM_GAMMA is not set
# CONFIG_DRM_R128 is not set
# CONFIG_DRM_RADEON is not setCONFIG_DRM_I810=yCONFIG_DRM_I830=y
# CONFIG_DRM_MGA is not setCONFIG_DRM_SIS=y
#
# PCMCIA character devices
#CONFIG_SYNCLINK_CS=y
# CONFIG_MWAVE is not set
# CONFIG_RAW_DRIVER is not set
# CONFIG_HANGCHECK_TIMER is not set
#
# Multimedia devices
#
# CONFIG_VIDEO_DEV is not set
#
# Digital Video Broadcasting Devices
#
# CONFIG_DVB is not set
#
# File systems
#CONFIG_EXT2_FS=y
# CONFIG_EXT2_FS_XATTR is not setCONFIG_EXT3_FS=yCONFIG_EXT3_FS_XATTR=yCONFIG_EXT3_FS_POSIX_ACL=y
# CONFIG_EXT3_FS_SECURITY is not setCONFIG_JBD=y
# CONFIG_JBD_DEBUG is not setCONFIG_FS_MBCACHE=yCONFIG_REISERFS_FS=y
# CONFIG_REISERFS_CHECK is not setCONFIG_REISERFS_PROC_INFO=y
# CONFIG_JFS_FS is not setCONFIG_FS_POSIX_ACL=yCONFIG_XFS_FS=y
# CONFIG_XFS_RT is not set
# CONFIG_XFS_QUOTA is not set
# CONFIG_XFS_POSIX_ACL is not set
# CONFIG_MINIX_FS is not setCONFIG_ROMFS_FS=y
# CONFIG_QUOTA is not setCONFIG_AUTOFS_FS=yCONFIG_AUTOFS4_FS=y
#
# CD-ROM/DVD Filesystems
#CONFIG_ISO9660_FS=yCONFIG_JOLIET=yCONFIG_ZISOFS=yCONFIG_ZISOFS_FS=yCONFIG_UDF_FS=y
#
# DOS/FAT/NT Filesystems
#CONFIG_FAT_FS=yCONFIG_MSDOS_FS=yCONFIG_VFAT_FS=yCONFIG_NTFS_FS=y
# CONFIG_NTFS_DEBUG is not set
# CONFIG_NTFS_RW is not set
#
# Pseudo filesystems
#CONFIG_PROC_FS=y
# CONFIG_DEVFS_FS is not setCONFIG_DEVPTS_FS=y
# CONFIG_DEVPTS_FS_XATTR is not setCONFIG_TMPFS=yCONFIG_RAMFS=y
#
# Miscellaneous filesystems
#
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not setCONFIG_HFS_FS=y
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not setCONFIG_CRAMFS=y
# CONFIG_VXFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
# CONFIG_SYSV_FS is not setCONFIG_UFS_FS=y
# CONFIG_UFS_FS_WRITE is not set
#
# Network File Systems
#CONFIG_NFS_FS=yCONFIG_NFS_V3=yCONFIG_NFS_V4=yCONFIG_NFSD=yCONFIG_NFSD_V3=y
# CONFIG_NFSD_V4 is not set
# CONFIG_NFSD_TCP is not setCONFIG_LOCKD=yCONFIG_LOCKD_V4=yCONFIG_EXPORTFS=yCONFIG_SUNRPC=y
# CONFIG_SUNRPC_GSS is not setCONFIG_SMB_FS=y
# CONFIG_SMB_NLS_DEFAULT is not setCONFIG_CIFS=yCONFIG_NCP_FS=yCONFIG_NCPFS_PACKET_SIGNING=yCONFIG_NCPFS_IOCTL_LOCKING=yCONFIG_NCPFS_STRONG=yCONFIG_NCPFS_NFS_NS=yCONFIG_NCPFS_OS2_NS=yCONFIG_NCPFS_SMALLDOS=yCONFIG_NCPFS_NLS=yCONFIG_NCPFS_EXTRAS=y
# CONFIG_CODA_FS is not set
# CONFIG_INTERMEZZO_FS is not set
# CONFIG_AFS_FS is not set
#
# Partition Types
#
# CONFIG_PARTITION_ADVANCED is not setCONFIG_MSDOS_PARTITION=yCONFIG_SMB_NLS=yCONFIG_NLS=y
#
# Native Language Support
#CONFIG_NLS_DEFAULT="iso8859-1"CONFIG_NLS_CODEPAGE_437=yCONFIG_NLS_CODEPAGE_737=yCONFIG_NLS_CODEPAGE_775=yCONFIG_NLS_CODEPAGE_850=yCONFIG_NLS_CODEPAGE_852=yCONFIG_NLS_CODEPAGE_855=yCONFIG_NLS_CODEPAGE_857=yCONFIG_NLS_CODEPAGE_860=yCONFIG_NLS_CODEPAGE_861=yCONFIG_NLS_CODEPAGE_862=yCONFIG_NLS_CODEPAGE_863=yCONFIG_NLS_CODEPAGE_864=yCONFIG_NLS_CODEPAGE_865=yCONFIG_NLS_CODEPAGE_866=yCONFIG_NLS_CODEPAGE_869=yCONFIG_NLS_CODEPAGE_936=yCONFIG_NLS_CODEPAGE_950=yCONFIG_NLS_CODEPAGE_932=yCONFIG_NLS_CODEPAGE_949=yCONFIG_NLS_CODEPAGE_874=yCONFIG_NLS_ISO8859_8=yCONFIG_NLS_CODEPAGE_1250=yCONFIG_NLS_CODEPAGE_1251=yCONFIG_NLS_ISO8859_1=yCONFIG_NLS_ISO8859_2=yCONFIG_NLS_ISO8859_3=yCONFIG_NLS_ISO8859_4=yCONFIG_NLS_ISO8859_5=yCONFIG_NLS_ISO8859_6=yCONFIG_NLS_ISO8859_7=yCONFIG_NLS_ISO8859_9=yCONFIG_NLS_ISO8859_13=yCONFIG_NLS_ISO8859_14=yCONFIG_NLS_ISO8859_15=yCONFIG_NLS_KOI8_R=yCONFIG_NLS_KOI8_U=yCONFIG_NLS_UTF8=y
#
# Graphics support
#CONFIG_FB=y
# CONFIG_FB_CYBER2000 is not set
# CONFIG_FB_IMSTT is not setCONFIG_FB_VGA16=yCONFIG_FB_VESA=yCONFIG_VIDEO_SELECT=y
# CONFIG_FB_HGA is not set
# CONFIG_FB_RIVA is not set
# CONFIG_FB_I810 is not set
# CONFIG_FB_MATROX is not set
# CONFIG_FB_RADEON is not set
# CONFIG_FB_ATY128 is not set
# CONFIG_FB_ATY is not setCONFIG_FB_SIS=yCONFIG_FB_SIS_300=yCONFIG_FB_SIS_315=yCONFIG_FB_NEOMAGIC=y
# CONFIG_FB_3DFX is not set
# CONFIG_FB_VOODOO1 is not setCONFIG_FB_TRIDENT=yCONFIG_FB_VIRTUAL=y
#
# Console display driver support
#CONFIG_VGA_CONSOLE=yCONFIG_MDA_CONSOLE=yCONFIG_DUMMY_CONSOLE=yCONFIG_FRAMEBUFFER_CONSOLE=yCONFIG_PCI_CONSOLE=yCONFIG_FONTS=y
CONFIG_FONT_8x8=y
CONFIG_FONT_8x16=y
CONFIG_FONT_6x11=y
CONFIG_FONT_PEARL_8x8=y
CONFIG_FONT_ACORN_8x8=y
CONFIG_FONT_MINI_4x6=y
# CONFIG_FONT_SUN8x16 is not set
# CONFIG_FONT_SUN12x22 is not set
#
# Logo configuration
#
# CONFIG_LOGO is not set
#
# Sound
#CONFIG_SOUND=y
#
# Advanced Linux Sound Architecture
#CONFIG_SND=yCONFIG_SND_SEQUENCER=yCONFIG_SND_SEQ_DUMMY=yCONFIG_SND_OSSEMUL=yCONFIG_SND_MIXER_OSS=yCONFIG_SND_PCM_OSS=yCONFIG_SND_SEQUENCER_OSS=yCONFIG_SND_RTCTIMER=y
# CONFIG_SND_VERBOSE_PRINTK is not set
# CONFIG_SND_DEBUG is not set
#
# Generic devices
#CONFIG_SND_DUMMY=yCONFIG_SND_VIRMIDI=yCONFIG_SND_MTPAV=yCONFIG_SND_SERIAL_U16550=yCONFIG_SND_MPU401=y
#
# PCI devices
#CONFIG_SND_ALI5451=yCONFIG_SND_AZT3328=yCONFIG_SND_CS46XX=yCONFIG_SND_CS46XX_NEW_DSP=yCONFIG_SND_CS4281=yCONFIG_SND_EMU10K1=yCONFIG_SND_KORG1212=yCONFIG_SND_NM256=yCONFIG_SND_RME32=yCONFIG_SND_RME96=yCONFIG_SND_RME9652=yCONFIG_SND_HDSP=yCONFIG_SND_TRIDENT=yCONFIG_SND_YMFPCI=yCONFIG_SND_ALS4000=yCONFIG_SND_CMIPCI=yCONFIG_SND_ENS1370=yCONFIG_SND_ENS1371=yCONFIG_SND_ES1938=y
# CONFIG_SND_ES1968 is not set
# CONFIG_SND_MAESTRO3 is not set
# CONFIG_SND_FM801 is not set
# CONFIG_SND_ICE1712 is not setCONFIG_SND_ICE1724=yCONFIG_SND_INTEL8X0=yCONFIG_SND_SONICVIBES=yCONFIG_SND_VIA82XX=yCONFIG_SND_VX222=y
#
# ALSA USB devices
#CONFIG_SND_USB_AUDIO=y
#
# PCMCIA devices
#
# CONFIG_SND_VXPOCKET is not set
# CONFIG_SND_VXP440 is not set
#
# Open Sound System
#
# CONFIG_SOUND_PRIME is not set
#
# USB support
#CONFIG_USB=y
# CONFIG_USB_DEBUG is not set
#
# Miscellaneous USB options
#CONFIG_USB_DEVICEFS=y
# CONFIG_USB_BANDWIDTH is not set
# CONFIG_USB_DYNAMIC_MINORS is not set
#
# USB Host Controller Drivers
#CONFIG_USB_EHCI_HCD=yCONFIG_USB_OHCI_HCD=yCONFIG_USB_UHCI_HCD=y
#
# USB Device Class drivers
#CONFIG_USB_AUDIO=y
# CONFIG_USB_BLUETOOTH_TTY is not setCONFIG_USB_MIDI=yCONFIG_USB_ACM=yCONFIG_USB_PRINTER=yCONFIG_USB_STORAGE=y
# CONFIG_USB_STORAGE_DEBUG is not setCONFIG_USB_STORAGE_DATAFAB=yCONFIG_USB_STORAGE_FREECOM=yCONFIG_USB_STORAGE_ISD200=yCONFIG_USB_STORAGE_DPCM=y
CONFIG_USB_STORAGE_HP8200e=yCONFIG_USB_STORAGE_SDDR09=yCONFIG_USB_STORAGE_SDDR55=yCONFIG_USB_STORAGE_JUMPSHOT=y
#
# USB Human Interface Devices (HID)
#CONFIG_USB_HID=y
# CONFIG_USB_HIDINPUT is not set
# CONFIG_USB_HIDDEV is not setCONFIG_USB_AIPTEK=yCONFIG_USB_WACOM=y
# CONFIG_USB_KBTAB is not setCONFIG_USB_POWERMATE=y
# CONFIG_USB_XPAD is not set
#
# USB Imaging devices
#CONFIG_USB_MDC800=yCONFIG_USB_SCANNER=yCONFIG_USB_MICROTEK=yCONFIG_USB_HPUSBSCSI=y
#
# USB Multimedia devices
#CONFIG_USB_DABUSB=y
#
# Video4Linux support is needed for USB Multimedia device support #
#
# USB Network adaptors
#
# CONFIG_USB_AX8817X_STANDALONE is not setCONFIG_USB_CATC=yCONFIG_USB_KAWETH=yCONFIG_USB_PEGASUS=yCONFIG_USB_RTL8150=yCONFIG_USB_USBNET=y
#
# USB Host-to-Host Cables
#CONFIG_USB_AN2720=yCONFIG_USB_BELKIN=yCONFIG_USB_GENESYS=yCONFIG_USB_NET1080=yCONFIG_USB_PL2301=y
#
# Intelligent USB Devices/Gadgets
#CONFIG_USB_ARMLINUX=yCONFIG_USB_EPSON2888=yCONFIG_USB_ZAURUS=yCONFIG_USB_CDCETHER=y
#
# USB Network Adapters
#CONFIG_USB_AX8817X=y
#
# USB port drivers
#CONFIG_USB_USS720=y
#
# USB Serial Converter support
#CONFIG_USB_SERIAL=y
# CONFIG_USB_SERIAL_DEBUG is not set
# CONFIG_USB_SERIAL_CONSOLE is not setCONFIG_USB_SERIAL_GENERIC=yCONFIG_USB_SERIAL_BELKIN=yCONFIG_USB_SERIAL_WHITEHEAT=yCONFIG_USB_SERIAL_DIGI_ACCELEPORT=yCONFIG_USB_SERIAL_EMPEG=yCONFIG_USB_SERIAL_FTDI_SIO=yCONFIG_USB_SERIAL_VISOR=yCONFIG_USB_SERIAL_IPAQ=yCONFIG_USB_SERIAL_IR=yCONFIG_USB_SERIAL_EDGEPORT=yCONFIG_USB_SERIAL_EDGEPORT_TI=yCONFIG_USB_SERIAL_KEYSPAN_PDA=yCONFIG_USB_SERIAL_KEYSPAN=y
# CONFIG_USB_SERIAL_KEYSPAN_MPR is not set
# CONFIG_USB_SERIAL_KEYSPAN_USA28 is not set
# CONFIG_USB_SERIAL_KEYSPAN_USA28X is not setCONFIG_USB_SERIAL_KEYSPAN_USA28XA=yCONFIG_USB_SERIAL_KEYSPAN_USA28XB=y
# CONFIG_USB_SERIAL_KEYSPAN_USA19 is not set
# CONFIG_USB_SERIAL_KEYSPAN_USA18X is not set
# CONFIG_USB_SERIAL_KEYSPAN_USA19W is not setCONFIG_USB_SERIAL_KEYSPAN_USA19QW=yCONFIG_USB_SERIAL_KEYSPAN_USA19QI=y
# CONFIG_USB_SERIAL_KEYSPAN_USA49W is not set
# CONFIG_USB_SERIAL_KEYSPAN_USA49WLC is not setCONFIG_USB_SERIAL_KLSI=yCONFIG_USB_SERIAL_KOBIL_SCT=yCONFIG_USB_SERIAL_MCT_U232=yCONFIG_USB_SERIAL_PL2303=y
# CONFIG_USB_SERIAL_SAFE is not setCONFIG_USB_SERIAL_CYBERJACK=yCONFIG_USB_SERIAL_XIRCOM=yCONFIG_USB_SERIAL_OMNINET=yCONFIG_USB_EZUSB=y
#
# USB Miscellaneous drivers
#
# CONFIG_USB_EMI26 is not setCONFIG_USB_TIGL=yCONFIG_USB_AUERSWALD=yCONFIG_USB_RIO500=yCONFIG_USB_BRLVGER=yCONFIG_USB_LCD=y
# CONFIG_USB_TEST is not setCONFIG_USB_GADGET=yCONFIG_USB_NET2280=y
# CONFIG_USB_ZERO is not setCONFIG_USB_ETH=yCONFIG_USB_ETH_NET2280=y
# CONFIG_USB_GADGETFS is not set
#
# Bluetooth support
#
# CONFIG_BT is not set
#
# Profiling support
#
# CONFIG_PROFILING is not set
#
# Kernel hacking
#CONFIG_DEBUG_KERNEL=yCONFIG_DEBUG_STACKOVERFLOW=y
# CONFIG_DEBUG_SLAB is not set
# CONFIG_DEBUG_IOVIRT is not setCONFIG_MAGIC_SYSRQ=y
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_DEBUG_PAGEALLOC is not set
# CONFIG_DEBUG_HIGHMEM is not set
# CONFIG_DEBUG_INFO is not set
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
# CONFIG_FRAME_POINTER is not set
#
# Security options
#CONFIG_SECURITY=y
# CONFIG_SECURITY_NETWORK is not set
# CONFIG_SECURITY_CAPABILITIES is not set
# CONFIG_SECURITY_ROOTPLUG is not set
# CONFIG_SECURITY_SELINUX is not set
#
# Cryptographic options
#
# CONFIG_CRYPTO is not set
#
# Library routines
#
# CONFIG_CRC32 is not setCONFIG_ZLIB_INFLATE=yCONFIG_X86_BIOS_REBOOT=y
Linux version 2.4.20-8 ([email protected]) (gcc version 3.2.2 20030222 (Red Hat Linux 3.2.2-5)) #1 Thu Mar 13 17:54:28 EST 2003 BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 00000000137e0000 (usable)
BIOS-e820: 00000000137e0000 - 00000000137f0000 (reserved)
BIOS-e820: 00000000137f0000 - 00000000137f8000 (ACPI data)
BIOS-e820: 00000000137f8000 - 0000000013800000 (ACPI NVS)
BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
0MB HIGHMEM available.
311MB LOWMEM available.
On node 0 totalpages: 79840
zone(0): 4096 pages.
zone(1): 75744 pages.
zone(2): 0 pages.
Kernel command line: ro root=LABEL=/ nousb
Initializing CPU#0
Detected 697.397 MHz processor.
Console: colour VGA+ 80x25
Calibrating delay loop... 1359.87 BogoMIPS
Memory: 309300k/319360k available (1347k kernel code, 7496k reserved, 999k data, 132k init, 0k highmem)
Dentry cache hash table entries: 65536 (order: 7, 524288 bytes)
Inode cache hash table entries: 32768 (order: 6, 262144 bytes)
Mount cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer-cache hash table entries: 16384 (order: 4, 65536 bytes)
Page-cache hash table entries: 131072 (order: 7, 524288 bytes)
CPU: L1 I cache: 16K, L1 D cache: 16K
CPU: L2 cache: 128K
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU: After generic, caps: 0383f9ff 00000000 00000000 00000000 CPU: Common caps: 0383f9ff 00000000 00000000 00000000 CPU: Intel Celeron (Coppermine) stepping 06
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
mtrr: v1.40 (20010327) Richard Gooch ([email protected])
mtrr: detected mtrr type: Intel
PCI: PCI BIOS revision 2.10 entry at 0xf0200, last bus=1
PCI: Using configuration type 1
PCI: Probing PCI hardware
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
apm: BIOS version 1.2 Flags 0x0f (Driver version 1.16)
Starting kswapd
VFS: Disk quotas vdquot_6.5.1
pty: 2048 Unix98 ptys configured
Serial driver version 5.05c (2001-07-08) with MANY_PORTS MULTIPORT SHARE_IRQ SERIAL_PCI ISAPNP enabled Real Time Clock Driver v1.10e
Floppy drive(s): fd0 is unknown type 14 (usb?)
floppy0: no floppy controllers found
NET4: Frame Diverter 0.46
RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
Uniform Multi-Platform E-IDE driver Revision: 7.00beta-2.4
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
ALI15X3: IDE controller at PCI slot 00:10.0
ALI15X3: chipset revision 195
ALI15X3: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0x7050-0x7057, BIOS settings: hda:DMA, hdb:pio
ide1: BM-DMA at 0x7058-0x705f, BIOS settings: hdc:DMA, hdd:piohda: IBM-DJSA-210, ATA DISK drive
blk: queue c03c9f40, I/O limit 4095Mb (mask 0xffffffff)
hdc: UJDA330, ATAPI CD/DVD-ROM drive
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
hda: host protected area => 1
hda: 19640880 sectors (10056 MB) w/384KiB Cache, CHS=1222/255/63, UDMA(33) ide-floppy driver 0.99.newide
Partition check:
hda: hda1 hda2 hda3
ide-floppy driver 0.99.newide
md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
IP: routing cache hash table of 2048 buckets, 16Kbytes
TCP: Hash tables configured (established 32768 bind 65536) Linux IP multicast router 0.06 plus PIM-SM
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
RAMDISK: Compressed image found at block 0
Freeing initrd memory: 146k freed
VFS: Mounted root (ext2 filesystem).
Journalled Block Device driver loaded
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
Freeing unused kernel memory: 132k freed
EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,3), internal journal Adding Swap: 329324k swap-space (priority -1)
kjournald starting. Commit interval 5 seconds
EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,1), internal journal
EXT3-fs: mounted filesystem with ordered data mode.usb.c: registered new driver usbdevfsusb.c: registered new driver hubusb.c: deregistering driver usbdevfsusb.c: deregistering driver hub
parport0: PC-style at 0x3bc [PCSPP,TRISTATE]ip_tables: (C) 2000-2002 Netfilter core team
Intel(R) PRO/100 Network Driver - version 2.1.29-k2
Copyright (c) 2002 Intel Corporation
PCI: Guessed IRQ 6 for device 00:0a.0
e100: selftest OK.
divert: allocating divert_blk for eth0
e100: eth0: Intel(R) 8255x-based Ethernet Adapter
Hardware receive checksums enabled
cpu cycle saver enabled
Linux Kernel Card Services 3.1.22
options: [pci] [cardbus] [pm]
PCI: Guessed IRQ 10 for device 00:13.0
Yenta IRQ list 0a38, PCI irq10
Socket status: 30000411
cs: IO port probe 0x0c00-0x0cff: clean.
cs: IO port probe 0x0100-0x04ff: excluding 0x2c8-0x2cf 0x3b8-0x3df 0x408-0x40f 0x480-0x48f 0x4d0-0x4d7
cs: IO port probe 0x0a00-0x0aff: clean.
cs: memory probe 0xa0000000-0xa0ffffff: clean.hermes.c: 5 Apr 2002 David Gibson <[email protected]>orinoco.c 0.11b (David Gibson <[email protected]> and others)orinoco_cs.c 0.11b (David Gibson <[email protected]> and others)
divert: allocating divert_blk for eth1
eth1: Station identity 001f:0001:0007:001c
eth1: Looks like a Lucent/Agere firmware version 7.28
eth1: Ad-hoc demo mode supported
eth1: IEEE standard IBSS ad-hoc mode supported
eth1: WEP supported, 104-bit key
eth1: MAC address 00:02:2D:40:4E:DF
eth1: Station name "HERMES I"
eth1: ready
eth1: index 0x01: Vcc 5.0, irq 3, io 0x0100-0x013fip_tables: (C) 2000-2002 Netfilter core teamip_tables: (C) 2000-2002 Netfilter core team
parport0: PC-style at 0x3bc [PCSPP,TRISTATE]
lp0: using parport0 (polling).
lp0: console ready
mice: PS/2 mouse device common for all mice
ide-floppy driver 0.99.newide
hdc: ATAPI 24X CD-ROM CD-R/RW drive, 2048kB Cache
Uniform CD-ROM driver Revision: 3.12
cdrom: This disc doesn't have any tracks I recognize!
Quoted 11 lines · Kevin Breit
Quoted 6 lines · Zwane Mwaikambo
Quoted 2 lines · Kevin Breit
I set the CPU type to PII/Celeron and recompiled. It was at PIII/Celeron but it still won't work. It is still rebooting.
Please send your .config and a dmesg from a working kernel.
The files should be attached. If they aren't, please let me know!
Thanks for your help.
Can you try with the following patch, courtesy of Adam Belay, my box panicked with your .config without it.
sound/pci/ens1370.c +5 -1
@@ -2354,7 +2354,11 @@ }static struct pci_driver driver = { - .name ="Ensoniq AudioPCI" , +#ifdef CHIP1371 + .name ="Ensoniq 1371" , +#else + .name ="Ensoniq 1370" , +#endif .id_table = snd_audiopci_ids, .probe = snd_audiopci_probe, .remove =__devexit_p (snd_audiopci_remove),
Quoted 32 lines · Zwane Mwaikambo
Quoted 10 lines · Kevin Breit
Quoted 7 lines · Zwane Mwaikambo
Quoted 3 lines · Kevin Breit
I set the CPU type to PII/Celeron and recompiled. It was at PIII/Celeron but it still won't work. It is still rebooting.
Quoted 8 lines
Quoted 3 lines
Please send your .config and a dmesg from a working kernel.
The files should be attached. If they aren't, please let me know!
Thanks for your help.
Can you try with the following patch, courtesy of Adam Belay, my box panicked with your .config without it.
sound/pci/ens1370.c +0
-0@@ -2354,7 +2354,11 @@ }
sound/pci/ens1370.c line 2364
Quoted 10 lines
sound/pci/ens1370.c +5
-1static struct pci_driver driver = { - .name ="Ensoniq AudioPCI" , +#ifdef CHIP1371 + .name ="Ensoniq 1371" , +#else + .name ="Ensoniq 1370" , +#endif .id_table = snd_audiopci_ids, .probe = snd_audiopci_probe, .remove =__devexit_p (snd_audiopci_remove),
This unfortunately didn't help. It still reboots right after it uncompresses the kernel.
Thanks
Kevin Breit
Quoted 2 lines · Kevin Breit
This unfortunately didn't help. It still reboots right after it uncompresses the kernel.
Please try the attached .config, if that works, start removing things like ACPI from your configuration.
#
# Automatically generated make config: don't edit
#CONFIG_X86=yCONFIG_MMU=yCONFIG_SWAP=yCONFIG_UID16=yCONFIG_GENERIC_ISA_DMA=y
#
# Code maturity level options
#CONFIG_EXPERIMENTAL=y
#
# General setup
#CONFIG_NET=yCONFIG_SYSVIPC=yCONFIG_BSD_PROCESS_ACCT=yCONFIG_SYSCTL=y
#
# Loadable module support
#
# CONFIG_MODULES is not set
#
# Processor type and features
#CONFIG_X86_PC=y
# CONFIG_X86_VOYAGER is not set
# CONFIG_X86_NUMAQ is not set
# CONFIG_X86_SUMMIT is not set
# CONFIG_M386 is not set
# CONFIG_M486 is not set
# CONFIG_M586 is not setCONFIG_M586TSC=y
# CONFIG_M586MMX is not set
# CONFIG_M686 is not set
# CONFIG_MPENTIUMIII is not set
# CONFIG_MPENTIUM4 is not set
# CONFIG_MK6 is not set
# CONFIG_MK7 is not set
# CONFIG_MK8 is not set
# CONFIG_MELAN is not set
# CONFIG_MCRUSOE is not set
# CONFIG_MWINCHIPC6 is not set
# CONFIG_MWINCHIP2 is not set
# CONFIG_MWINCHIP3D is not set
# CONFIG_MCYRIXIII is not setCONFIG_X86_CMPXCHG=yCONFIG_X86_XADD=yCONFIG_X86_L1_CACHE_SHIFT=5CONFIG_RWSEM_XCHGADD_ALGORITHM=yCONFIG_X86_PPRO_FENCE=yCONFIG_X86_F00F_BUG=yCONFIG_X86_WP_WORKS_OK=yCONFIG_X86_INVLPG=yCONFIG_X86_BSWAP=yCONFIG_X86_POPAD_OK=yCONFIG_X86_USE_STRING_486=yCONFIG_X86_ALIGNMENT_16=yCONFIG_X86_TSC=y
# CONFIG_HUGETLB_PAGE is not set
# CONFIG_SMP is not set
# CONFIG_PREEMPT is not setCONFIG_X86_UP_APIC=y
# CONFIG_X86_UP_IOAPIC is not setCONFIG_X86_LOCAL_APIC=y
# CONFIG_X86_MCE is not set
# CONFIG_TOSHIBA is not set
# CONFIG_I8K is not set
# CONFIG_MICROCODE is not set
# CONFIG_X86_MSR is not set
# CONFIG_X86_CPUID is not set
# CONFIG_EDD is not set
# CONFIG_NOHIGHMEM is not setCONFIG_HIGHMEM4G=y
# CONFIG_HIGHMEM64G is not setCONFIG_HIGHMEM=y
# CONFIG_HIGHPTE is not set
# CONFIG_MATH_EMULATION is not set
# CONFIG_MTRR is not set
#
# Power management options (ACPI, APM)
#
# CONFIG_PM is not set
#
# ACPI Support
#
# CONFIG_ACPI is not set
# CONFIG_CPU_FREQ is not set
#
# Bus options (PCI, PCMCIA, EISA, MCA, ISA)
#
# CONFIG_PCI is not set
# CONFIG_SCx200 is not setCONFIG_ISA=y
# CONFIG_EISA is not set
# CONFIG_MCA is not set
# CONFIG_HOTPLUG is not set
#
# Executable file formats
#CONFIG_KCORE_ELF=y
# CONFIG_KCORE_AOUT is not setCONFIG_BINFMT_AOUT=yCONFIG_BINFMT_ELF=yCONFIG_BINFMT_MISC=y
#
# Memory Technology Devices (MTD)
#
# CONFIG_MTD is not set
#
# Parallel port support
#
# CONFIG_PARPORT is not set
#
# Plug and Play support
#
# CONFIG_PNP is not set
#
# Block devices
#CONFIG_BLK_DEV_FD=y
# CONFIG_BLK_DEV_XD is not setCONFIG_BLK_DEV_LOOP=y
# CONFIG_BLK_DEV_NBD is not setCONFIG_BLK_DEV_RAM=yCONFIG_BLK_DEV_RAM_SIZE=4096CONFIG_BLK_DEV_INITRD=y
# CONFIG_LBD is not set
#
# ATA/ATAPI/MFM/RLL device support
#CONFIG_IDE=y
#
# IDE, ATA and ATAPI Block devices
#CONFIG_BLK_DEV_IDE=y
#
# Please see Documentation/ide.txt for help/info on IDE drives #
# CONFIG_BLK_DEV_HD_IDE is not set
# CONFIG_BLK_DEV_HD is not set CONFIG_BLK_DEV_IDEDISK=y
# CONFIG_IDEDISK_MULTI_MODE is not set
# CONFIG_IDEDISK_STROKE is not set
# CONFIG_BLK_DEV_IDECD is not set
# CONFIG_BLK_DEV_IDEFLOPPY is not set
# CONFIG_IDE_TASK_IOCTL is not set
#
# IDE chipset support/bugfixes
#
# CONFIG_BLK_DEV_CMD640 is not set
# CONFIG_IDE_CHIPSETS is not set
#
# SCSI device support
#
# CONFIG_SCSI is not set
#
# Old CD-ROM drivers (not SCSI, not IDE)
#
# CONFIG_CD_NO_IDESCSI is not set
#
# Multi-device support (RAID and LVM)
#
# CONFIG_MD is not set
#
# Fusion MPT device support
#
#
# I2O device support
#
# CONFIG_I2O is not set
#
# Networking options
#CONFIG_PACKET=yCONFIG_PACKET_MMAP=yCONFIG_NETLINK_DEV=y
# CONFIG_NETFILTER is not set
# CONFIG_FILTER is not setCONFIG_UNIX=y
# CONFIG_NET_KEY is not setCONFIG_INET=y
# CONFIG_IP_MULTICAST is not set
# CONFIG_IP_ADVANCED_ROUTER is not set
# CONFIG_IP_PNP is not set
# CONFIG_NET_IPIP is not set
# CONFIG_NET_IPGRE is not set
# CONFIG_ARPD is not set
# CONFIG_INET_ECN is not set
# CONFIG_SYN_COOKIES is not set
# CONFIG_INET_AH is not set
# CONFIG_INET_ESP is not set
# CONFIG_XFRM_USER is not set
# CONFIG_IPV6 is not set
#
# SCTP Configuration (EXPERIMENTAL)
#CONFIG_IPV6_SCTP__=y
# CONFIG_IP_SCTP is not set
# CONFIG_ATM is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_LLC is not set
# CONFIG_DECNET is not set
# CONFIG_BRIDGE is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_NET_DIVERT is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
# CONFIG_NET_FASTROUTE is not set
# CONFIG_NET_HW_FLOWCONTROL is not set
#
# QoS and/or fair queueing
#
# CONFIG_NET_SCHED is not set
#
# Network testing
#
# CONFIG_NET_PKTGEN is not set
#
# Network device support
#CONFIG_NETDEVICES=y
#
# ARCnet devices
#
# CONFIG_ARCNET is not setCONFIG_DUMMY=y
# CONFIG_BONDING is not set
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set
# CONFIG_ETHERTAP is not set
#
# Ethernet (10 or 100Mbit)
#CONFIG_NET_ETHERNET=y
# CONFIG_NET_VENDOR_3COM is not set
# CONFIG_LANCE is not set
# CONFIG_NET_VENDOR_SMC is not set
# CONFIG_NET_VENDOR_RACAL is not set
# CONFIG_AT1700 is not set
# CONFIG_DEPCA is not set
# CONFIG_HP100 is not setCONFIG_NET_ISA=y
# CONFIG_E2100 is not set
# CONFIG_EWRK3 is not set
# CONFIG_EEXPRESS is not set
# CONFIG_EEXPRESS_PRO is not set
# CONFIG_HPLAN_PLUS is not set
# CONFIG_HPLAN is not set
# CONFIG_LP486E is not set
# CONFIG_ETH16I is not set
# CONFIG_NE2000 is not set
# CONFIG_ZNET is not set
# CONFIG_NET_PCI is not set
# CONFIG_NET_POCKET is not set
#
# Ethernet (1000 Mbit)
#
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
#
# Wireless LAN (non-hamradio)
#
# CONFIG_NET_RADIO is not set
#
# Token Ring devices (depends on LLC=y)
#
# CONFIG_NET_FC is not set
# CONFIG_SHAPER is not set
#
# Wan interfaces
#
# CONFIG_WAN is not set
#
# Amateur Radio support
#
# CONFIG_HAMRADIO is not set
#
# IrDA (infrared) support
#
# CONFIG_IRDA is not set
#
# ISDN subsystem
#
# CONFIG_ISDN_BOOL is not set
#
# Telephony Support
#
# CONFIG_PHONE is not set
#
# Input device support
#CONFIG_INPUT=y
#
# Userland interfaces
#
# CONFIG_INPUT_MOUSEDEV is not set
# CONFIG_INPUT_JOYDEV is not set
# CONFIG_INPUT_TSDEV is not setCONFIG_INPUT_EVDEV=y
# CONFIG_INPUT_EVBUG is not set
#
# Input I/O drivers
#
# CONFIG_GAMEPORT is not setCONFIG_SOUND_GAMEPORT=yCONFIG_SERIO=yCONFIG_SERIO_I8042=y
# CONFIG_SERIO_SERPORT is not set
# CONFIG_SERIO_CT82C710 is not set
#
# Input Device Drivers
#CONFIG_INPUT_KEYBOARD=yCONFIG_KEYBOARD_ATKBD=y
# CONFIG_KEYBOARD_SUNKBD is not setCONFIG_KEYBOARD_XTKBD=y
# CONFIG_KEYBOARD_NEWTON is not set
# CONFIG_INPUT_MOUSE is not set
# CONFIG_INPUT_JOYSTICK is not set
# CONFIG_INPUT_TOUCHSCREEN is not setCONFIG_INPUT_MISC=yCONFIG_INPUT_PCSPKR=y
# CONFIG_INPUT_UINPUT is not set
#
# Character devices
#CONFIG_VT=yCONFIG_VT_CONSOLE=yCONFIG_HW_CONSOLE=y
# CONFIG_SERIAL_NONSTANDARD is not set
#
# Serial drivers
#
# CONFIG_SERIAL_8250 is not set
#
# Non-8250 serial port support
#CONFIG_UNIX98_PTYS=yCONFIG_UNIX98_PTY_COUNT=256
#
# I2C support
#
# CONFIG_I2C is not set
#
# I2C Hardware Sensors Mainboard support
#
#
# I2C Hardware Sensors Chip support
#
#
# Mice
#
# CONFIG_BUSMOUSE is not set
# CONFIG_QIC02_TAPE is not set
#
# Watchdog Cards
#
# CONFIG_WATCHDOG is not set
# CONFIG_NVRAM is not set
# CONFIG_RTC is not set
# CONFIG_GEN_RTC is not set
# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
#
# Ftape, the floppy tape device driver
#
# CONFIG_FTAPE is not set
# CONFIG_AGP is not set
# CONFIG_DRM is not set
# CONFIG_MWAVE is not set
# CONFIG_RAW_DRIVER is not set
#
# Multimedia devices
#
# CONFIG_VIDEO_DEV is not set
#
# File systems
#
# CONFIG_QUOTA is not set
# CONFIG_AUTOFS_FS is not set
# CONFIG_AUTOFS4_FS is not set
# CONFIG_REISERFS_FS is not set
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not setCONFIG_EXT3_FS=y
# CONFIG_EXT3_FS_XATTR is not setCONFIG_JBD=y
# CONFIG_JBD_DEBUG is not set
# CONFIG_FAT_FS is not set
# CONFIG_EFS_FS is not set
# CONFIG_CRAMFS is not set
# CONFIG_TMPFS is not setCONFIG_RAMFS=y
# CONFIG_ISO9660_FS is not set
# CONFIG_JFS_FS is not setCONFIG_MINIX_FS=y
# CONFIG_VXFS_FS is not set
# CONFIG_NTFS_FS is not set
# CONFIG_HPFS_FS is not setCONFIG_PROC_FS=y
# CONFIG_DEVFS_FS is not setCONFIG_DEVPTS_FS=y
# CONFIG_QNX4FS_FS is not set
# CONFIG_ROMFS_FS is not setCONFIG_EXT2_FS=y
# CONFIG_EXT2_FS_XATTR is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UDF_FS is not set
# CONFIG_UFS_FS is not set
# CONFIG_XFS_FS is not set
#
# Network File Systems
#
# CONFIG_CODA_FS is not set
# CONFIG_INTERMEZZO_FS is not set
# CONFIG_NFS_FS is not set
# CONFIG_NFSD is not set
# CONFIG_EXPORTFS is not set
# CONFIG_CIFS is not set
# CONFIG_SMB_FS is not set
# CONFIG_NCP_FS is not set
# CONFIG_AFS_FS is not set
#
# Partition Types
#CONFIG_PARTITION_ADVANCED=y
# CONFIG_ACORN_PARTITION is not set
# CONFIG_OSF_PARTITION is not set
# CONFIG_AMIGA_PARTITION is not set
# CONFIG_ATARI_PARTITION is not set
# CONFIG_MAC_PARTITION is not setCONFIG_MSDOS_PARTITION=y
# CONFIG_BSD_DISKLABEL is not set
# CONFIG_MINIX_SUBPARTITION is not set
# CONFIG_SOLARIS_X86_PARTITION is not set
# CONFIG_UNIXWARE_DISKLABEL is not set
# CONFIG_LDM_PARTITION is not set
# CONFIG_SGI_PARTITION is not set
# CONFIG_ULTRIX_PARTITION is not set
# CONFIG_SUN_PARTITION is not set
# CONFIG_EFI_PARTITION is not set
#
# Graphics support
#
# CONFIG_FB is not set
# CONFIG_VIDEO_SELECT is not set
#
# Console display driver support
#CONFIG_VGA_CONSOLE=y
# CONFIG_MDA_CONSOLE is not setCONFIG_DUMMY_CONSOLE=y
#
# Sound
#
# CONFIG_SOUND is not set
#
# USB support
#
#
# Bluetooth support
#
# CONFIG_BT is not set
#
# Profiling support
#
# CONFIG_PROFILING is not set
#
# Kernel hacking
#CONFIG_DEBUG_KERNEL=y
# CONFIG_DEBUG_STACKOVERFLOW is not set
# CONFIG_DEBUG_SLAB is not set
# CONFIG_DEBUG_IOVIRT is not set
# CONFIG_MAGIC_SYSRQ is not setCONFIG_DEBUG_SPINLOCK=y
# CONFIG_DEBUG_HIGHMEM is not set
# CONFIG_KALLSYMS is not set
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
# CONFIG_FRAME_POINTER is not setCONFIG_TIMEPEG=yCONFIG_INTLAT=yCONFIG_SYSCALLTIMER=yCONFIG_X86_EXTRA_IRQS=yCONFIG_X86_FIND_SMP_CONFIG=yCONFIG_X86_MPPARSE=y
#
# Security options
#
# CONFIG_SECURITY is not set
#
# Cryptographic options
#
# CONFIG_CRYPTO is not set
#
# Library routines
#
# CONFIG_CRC32 is not setCONFIG_X86_BIOS_REBOOT=y
Quoted 7 lines · Zwane Mwaikambo
Quoted 2 lines · Kevin Breit
This unfortunately didn't help. It still reboots right after it uncompresses the kernel.
Please try the attached .config, if that works, start removing things like ACPI from your configuration.
When I did a make it kept asking me for configuration options ("Do you want to add this? [Y/n]") I'm not sure what to say to all these.
Thanks
Kevin
Quoted 10 lines · Zwane Mwaikambo
Quoted 3 lines · Kevin Breit
This unfortunately didn't help. It still reboots right after it uncompresses the kernel.
Please try the attached .config, if that works, start removing things like ACPI from your configuration.
Bah! I wasn't thinking this morning. I ran a make menuconfig and now I'm running make, so ignore my last message. I'll reply later about the new kernel.
Thanks
Kevin Breit
Quoted 10 lines · Zwane Mwaikambo
Quoted 3 lines · Kevin Breit
This unfortunately didn't help. It still reboots right after it uncompresses the kernel.
Please try the attached .config, if that works, start removing things like ACPI from your configuration.
Yay! This works. I am going to fiddle around with my kernel setup (ACPI first?) and see what is causing my system to not boot. However, the minimal kernel you sent me does work.
Thanks
Kevin Breit
Quoted 7 lines · Zwane Mwaikambo
Quoted 2 lines · Kevin Breit
This unfortunately didn't help. It still reboots right after it uncompresses the kernel.
Please try the attached .config, if that works, start removing things like ACPI from your configuration.
I disabled ACPI and that didn't help. I reenabled it now and I'm looking for other options to disable. But I don't know where to start. Any suggestions?
Thanks
Kevin Breit
Quoted 3 lines · Kevin Breit
I disabled ACPI and that didn't help. I reenabled it now and I'm looking for other options to disable. But I don't know where to start. Any suggestions?
What CPU are you running on? It isn't an Opteron is it? I saw the same thing with the NUMA support for the AMD64.
Use "make menuconfig" and have a look at all the options under the first few menus. Make sure your CPU and power management options look right for your machine. When in doubt read the help text for the option, it is sometimes very helpful.
Signature · 1 line
Chris
Quoted 9 lines · Chris Meadors
Quoted 4 lines · Kevin Breit
I disabled ACPI and that didn't help. I reenabled it now and I'm
looking for other options to disable. But I don't know where to start. Any suggestions?
Quoted 10 lines
What CPU are you running on? It isn't an Opteron is it? I saw the same thing with the NUMA support for the AMD64.
Use "make menuconfig" and have a look at all the options under the first few menus. Make sure your CPU and power management options look right for your machine. When in doubt read the help text for the option, it is sometimes very helpful.
/proc/cpuinfo says:
model name: Celeron (Coppermine)
So my configuration for the first 5 main menu items that are enabled in makeconfig are:
* Prompt for developer and/or incomplete code/drivers
* Select only drivers expected to compile cleanly
* Select only drivers that don't need compile-time external firmware
* Support for paging of anonymous memory
* System V IPC
* BSD Process Accounting
* Sysctl support
* Subarchitecture Type (PC-compatible)
* Processor family (Pentium-II/Celeron(pre-Coppermine))
* Preemptible Kernel
* Machine Check Exception
* /dev/cpu/microcode
* /dev/cpu/*/msr
* /dev/cpu/*/cpuid
* BIOS Enhanced Disk Drive calls determine boot disk
* Power Management support
*Full ACPI Support (minus the ASUS Laptop Extras and Toshiba Laptop
Extras)
Do you see anything in that list which I should look into ditching first?
Thanks
Kevin Breit
Quoted 11 lines · Kevin Breit
/proc/cpuinfosays:model name: Celeron (Coppermine)
So my configuration for the first 5 main menu items that are enabled in makeconfig are:
* Prompt for developer and/or incomplete code/drivers
* Select only drivers expected to compile cleanly
* Select only drivers that don't need compile-time external firmware
Quoted 6 lines
* Support for paging of anonymous memory
* System V IPC
* BSD Process Accounting
* Sysctl support
* Subarchitecture Type (PC-compatible)
* Processor family (Pentium-II/Celeron(pre-Coppermine))
You can pick the Pentium-III here, since you have a Coppermine core Celeron. But this will almost surely not be any part of the solution to the problem.
Quoted 6 lines
* Preemptible Kernel
* Machine Check Exception
*/dev/cpu/microcode
*/dev/cpu/*/msr
*/dev/cpu/*/cpuid
* BIOS Enhanced Disk Drive calls determine boot disk
I'd turn this off, just to see if it makes any change. It says it is "believed to be safe", but it is experimental, and your controller BIOS almost surely does not support it.
Quoted 5 lines
* Power Management support
*Full ACPI Support (minus the ASUS Laptop Extras and Toshiba Laptop
Extras)Do you see anything in that list which I should look into ditching first?
Other than the EDD setting, I see nothing. What do you have in the next choice after ACPI, the APM stuff?
Also, can you see anything on the screen before it reboots? There is nothing after "Uncompressing kernel..."? Just boom, it reboots?
There isn't much that can trigger a reboot that early on.
Signature · 1 line
Chris
Quoted 23 lines · Chris Meadors
Quoted 10 lines · Kevin Breit
/proc/cpuinfosays:model name: Celeron (Coppermine)
So my configuration for the first 5 main menu items that are enabled in makeconfig are:
* Prompt for developer and/or incomplete code/drivers
* Select only drivers expected to compile cleanly
* Select only drivers that don't need compile-time external firmwareQuoted 8 lines
* Support for paging of anonymous memory
* System V IPC
* BSD Process Accounting
* Sysctl support
* Subarchitecture Type (PC-compatible)
* Processor family (Pentium-II/Celeron(pre-Coppermine))
Quoted 5 lines
You can pick the Pentium-III here, since you have a Coppermine core Celeron. But this will almost surely not be any part of the solution to the problem.
I didn't think it would make a difference.
Quoted 9 lines
Quoted 8 lines
* Preemptible Kernel
* Machine Check Exception
*/dev/cpu/microcode
*/dev/cpu/*/msr
*/dev/cpu/*/cpuid
* BIOS Enhanced Disk Drive calls determine boot disk
Quoted 5 lines
I'd turn this off, just to see if it makes any change. It says it is "believed to be safe", but it is experimental, and your controller BIOS almost surely does not support it.
I turned this off. I'll report my findings shortly.
Quoted 4 lines
Quoted 4 lines
* Power Management support
*Full ACPI Support (minus the ASUS Laptop Extras and Toshiba Laptop
Extras)
Quoted 8 lines
Quoted 3 lines
Do you see anything in that list which I should look into ditching first?
Other than the EDD setting, I see nothing. What do you have in the next choice after ACPI, the APM stuff?
I have all the ACPI stuff enabled and no APM enabled. I do not have ACPI debuggging statements enabled.
Quoted 4 lines
Also, can you see anything on the screen before it reboots? There is nothing after "Uncompressing kernel..."? Just boom, it reboots?
It says Uncompressing kernel....................gives the message saying the uncompression is done and then reboots. The time between finishing the uncompression and rebooting is about .1 sec.
Quoted 3 lines
There isn't much that can trigger a reboot that early on.
I figured that, which is why I am asking for help about where to disable things?
Thanks
Kevin Breit
Quoted 8 lines · Kevin Breit
* Machine Check Exception
*/dev/cpu/microcode
*/dev/cpu/*/msr
*/dev/cpu/*/cpuid
* BIOS Enhanced Disk Drive calls determine boot disk
* Power Management support
*Full ACPI Support (minus the ASUS Laptop Extras and Toshiba Laptop
Extras)
I would turn off all of these. None of them should be necessary. You cab turn ACPI back on afterwards to see if it works again.
-Rahul
--
Rahul Karnik
[email protected]
http://www.genebrew.com/
Quoted 11 lines · Chris Meadors
On Mon, 2003-09-15 at 16:44, Kevin Breit wrote
Quoted 8 lines
* Preemptible Kernel
* Machine Check Exception
*/dev/cpu/microcode
*/dev/cpu/*/msr
*/dev/cpu/*/cpuid
* BIOS Enhanced Disk Drive calls determine boot disk
Quoted 6 lines
I'd turn this off, just to see if it makes any change. It says it is "believed to be safe", but it is experimental, and your controller BIOS almost surely does not support it.
Disabling this didn't fix anything.
Kevin
Quoted 6 lines · Kevin Breit
Quoted 5 lines · Zwane Mwaikambo
Quoted 2 lines · Kevin Breit
This unfortunately didn't help. It still reboots right after it uncompresses the kernel.
Quoted 6 lines
Quoted 2 lines
Please try the attached .config, if that works, start removing things like ACPI from your configuration.
I disabled ACPI and that didn't help. I reenabled it now and I'm looking for other options to disable. But I don't know where to start. Any suggestions?
Sure, but let's take it off the mailing list.