bcsp w/ csr chip Mavin CF card
I had sent a message to the list a week or so ago with the following errors repeating in my dmesg log on the Sharp Zaurus SL5000D:
btuart_cs: Unknown HCI packet with type 0xc0 received.
btuart_cs: Unknown HCI packet with type 0x00 received.
btuart_cs: Unknown HCI packet with type 0x41 received.
btuart_cs: Unknown HCI packet with type 0x00 received.
btuart_cs: Unknown HCI packet with type 0xbe received.
btuart_cs: Unknown HCI packet with type 0xa9 received.
btuart_cs: Unknown HCI packet with type 0xdc received.
btuart_cs: Unknown HCI packet with type 0xed received.
btuart_cs: Unknown HCI packet with type 0xed received.
btuart_cs: Unknown HCI packet with type 0x01 received.
btuart_cs: Unknown HCI packet with type 0xff received.
btuart_cs: RLSI
If I allow this to continue, the Zaurus eventually freezes up and I have to take the battery out to get it back to normal again. From the output, Steven Singer explained to me that the btuart_cs module uses the csr chip set and is in bcsp mode. The bluez module is still talk using H4 to the module.
I am using the base installed modules and scripts with slight configuration modifications on theKompanyROM for the Zaurus. It is currently on the 2.4.18 kernel. The Zaurus recognizes the card as the Mavin Compact Flash card when it is put in.
Does anybody know how I can modify the scripts or configurations to attach using bcsp and maybe give some specifics on files to be modified? Thank you in advance.
Chris Sterling
[email protected]
http://www.oXians.com/
-------------------------------------------------------
This sf.net email is sponsored by:ThinkGeek
Welcome to geek heaven.
http://thinkgeek.com/sf
_______________________________________________
Bluez-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/bluez-users
Quoted 8 lines · Chris Sterling
I am using the base installed modules and scripts with slight configuration modifications on theKompanyROM for the Zaurus. It is currently on the 2.4.18 kernel. The Zaurus recognizes the card as the Mavin Compact Flash card when it is put in.
Does anybody know how I can modify the scripts or configurations to attach using bcsp and maybe give some specifics on files to be modified? Thank you in advance.
The BlueZ install on theKompany ROM is broken with respect to UART based CF cards. You need to install the latest BlueZ driver package from
http://community.zaurus.com/projects/bluez/
Then add a line in /etc/bluetooth/uart that follows the format:
<product info>:/dev/ttyS3 bcsp
Where <product info> is the exact text after "product info:" from the output of the command 'cardctl ident'
HTH
Signature · 13 lines
Colin Pinkney http://www.cpinkney.org.uk ------------------------------------------------------- This sf.net email is sponsored by:ThinkGeek Welcome to geek heaven. http://thinkgeek.com/sf _______________________________________________ Bluez-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/bluez-users