Skip to contentSkip to conversation

Mapping PCI video memory with remap_page_range

DISCUSSION JDeas 1 participant 1 message Sep 25, 2003

lore
Share & tools
lore

JDeas

author
#0 lore raw

I am having problems using the remap_page_range on a PCI card. I am using a driver that claims to have worked on RH7.2 but nothing else.

I have setup a RH9.0 (2.4.20-6smp kernel) and made the changes needed to compile the driver. I have managed ioctl access and am able to talk and configure the card with the exception of the mmaped areas (video buffer and alternate mapped registers).

The only change I made related to this in the old driver
was to change the remap_page_range(). The old version did not supply the vma struct like needed by the new kernel so I
added it along with a VM_IO flag.(side note: should the VM_IO flag be used for iomem?)

I inserted printk commands and found the following remap was being executed.

remap_page_range(421330000,f0000000,4000000,0x27)
I also found the vma->Flag = 840fb

End results were this. Running a program to keep the driver open, I was able to get the following info (/proc/[pid]/maps)
42133000-46133000 rw-s 00000000

This seems wrong. The size is right but the mapped address shows 0 Should I not see f0000000? The /proc files (iomem and pci) both show the card and its resources where requested.

What else should I check?

Regards,
JD