kernel BUG at arch/sparc64/kernel/module.c:207 (2.6.0-test6)

DISCUSSION Magosányi Árpád 2 participants 2 messages Oct 2, 2003 – Oct 3, 2003

Share & tools

Magosányi Árpád

author

2003-10-02 16:56 UTC #0 lore raw

Hi!

It is a sun netra T1, headless, kernel 2.6.0-test6. There is a reproducible bug with module loading. I have tested it. You get it when you load a module. Any module. After that cat /proc/modules hangs.

You can find the full dmesg atttached, just like the ksymoops output, the kernel config and the ver_linux output both from the tcb and the build environment (the beginning thereof, as it hangs on /proc/modules).

I send this report also to the linux-kernel list, because I got no reply to my last bug report, and I am afraid that it got lost somewhere on the way.

How is it looks like:
------------------------------
System time was Thu Oct 2 16:33:12 UTC 2003.
Setting the System Clock using the Hardware Clock as reference... System Clock set. System local time is now Thu Oct 2 16:33:14 UTC 2003. Calculating module dependencies... done.
Loading modules...
iptable_filter
kernel BUG at arch/sparc64/kernel/module.c:207!

              \|/ ____ \|/
              "@'/ .. \`@"
              /_| \__/ |_\
                 \__U_/

----------------------------------------------------

#
# Automatically generated make config: don't edit
#
CONFIG_64BIT=y
CONFIG_MMU=y

#
# Code maturity level options
#
CONFIG_EXPERIMENTAL=y
CONFIG_CLEAN_COMPILE=y
CONFIG_STANDALONE=y
CONFIG_BROKEN_ON_SMP=y

#
# General setup
#
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
# CONFIG_BSD_PROCESS_ACCT is not set
CONFIG_SYSCTL=y
CONFIG_LOG_BUF_SHIFT=15
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
# CONFIG_EMBEDDED is not set
CONFIG_KALLSYMS=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_IOSCHED_NOOP=y
CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y

#
# Loadable module support
#
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
CONFIG_MODULE_FORCE_UNLOAD=y
CONFIG_OBSOLETE_MODPARM=y
CONFIG_MODVERSIONS=y
CONFIG_KMOD=y

#
# General setup
#
CONFIG_BBC_I2C=m
CONFIG_VT=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
# CONFIG_SMP is not set
# CONFIG_PREEMPT is not set CONFIG_CPU_FREQ=y
CONFIG_CPU_FREQ_TABLE=y
# CONFIG_US3_FREQ is not set CONFIG_US2E_FREQ=m CONFIG_CPU_FREQ_PROC_INTF=y CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y # CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
# CONFIG_CPU_FREQ_GOV_POWERSAVE is not set # CONFIG_CPU_FREQ_GOV_USERSPACE is not set CONFIG_SPARC64=y
CONFIG_HOTPLUG=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_GENERIC_ISA_DMA=y
CONFIG_SBUS=y
CONFIG_SBUSCHAR=y
CONFIG_SUN_AUXIO=y
CONFIG_SUN_IO=y
CONFIG_PCI=y
CONFIG_PCI_DOMAINS=y
CONFIG_RTC=y
CONFIG_PCI_LEGACY_PROC=y CONFIG_PCI_NAMES=y
CONFIG_SUN_OPENPROMFS=m CONFIG_SPARC32_COMPAT=y
CONFIG_COMPAT=y
CONFIG_BINFMT_ELF32=y
# CONFIG_BINFMT_AOUT32 is not set CONFIG_BINFMT_ELF=y
# CONFIG_BINFMT_MISC is not set
# CONFIG_SUNOS_EMUL is not set
# CONFIG_SOLARIS_EMUL is not set

#
# Parallel port support
#
CONFIG_PARPORT=m
# CONFIG_PARPORT_PC is not set
CONFIG_PARPORT_SUNBPP=m
# CONFIG_PARPORT_OTHER is not set
CONFIG_PARPORT_1284=y
CONFIG_PRINTER=m
CONFIG_ENVCTRL=m
# CONFIG_DISPLAY7SEG is not set
# CONFIG_WATCHDOG_CP1XXX is not set
# CONFIG_WATCHDOG_RIO is not set

#
# Generic Driver Options
#
# CONFIG_FW_LOADER is not set

#
# Graphics support
#
# CONFIG_FB is not set

#
# Console display driver support
#
# CONFIG_VGA_CONSOLE is not set
# CONFIG_MDA_CONSOLE is not set
# CONFIG_PROM_CONSOLE is not set
CONFIG_DUMMY_CONSOLE=y

#
# Serial drivers
#
# CONFIG_SERIAL_8250 is not set

#
# Non-8250 serial port support
#
CONFIG_SERIAL_SUNCORE=y
CONFIG_SERIAL_SUNZILOG=y
CONFIG_SERIAL_SUNZILOG_CONSOLE=y
CONFIG_SERIAL_SUNSU=y
CONFIG_SERIAL_SUNSU_CONSOLE=y
# CONFIG_SERIAL_SUNSAB is not set
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y

#
# Misc Linux/SPARC drivers
#
CONFIG_SUN_OPENPROMIO=m
CONFIG_SUN_MOSTEK_RTC=y
CONFIG_OBP_FLASH=m
# CONFIG_SUN_BPP is not set
# CONFIG_SUN_VIDEOPIX is not set
# CONFIG_SUN_AURORA is not set

#
# Memory Technology Devices (MTD)
#
# CONFIG_MTD is not set

#
# Block devices
#
CONFIG_BLK_DEV_FD=y
CONFIG_BLK_DEV_LOOP=m
# CONFIG_BLK_DEV_NBD is not set

#
# Multi-device support (RAID and LVM)
#
CONFIG_MD=y
CONFIG_BLK_DEV_MD=m
CONFIG_MD_LINEAR=m
CONFIG_MD_RAID0=m
CONFIG_MD_RAID1=m
CONFIG_MD_RAID5=m
CONFIG_MD_MULTIPATH=m
CONFIG_BLK_DEV_DM=y
CONFIG_DM_IOCTL_V4=y
# CONFIG_BLK_DEV_RAM is not set

#
# ATA/ATAPI/MFM/RLL support
#
CONFIG_IDE=m
CONFIG_BLK_DEV_IDE=m

#
# Please see Documentation/ide.txt for help/info on IDE drives #
CONFIG_BLK_DEV_IDEDISK=m
# CONFIG_IDEDISK_MULTI_MODE is not set
# CONFIG_IDEDISK_STROKE is not set CONFIG_BLK_DEV_IDECD=m
CONFIG_BLK_DEV_IDETAPE=m
CONFIG_BLK_DEV_IDEFLOPPY=m
CONFIG_BLK_DEV_IDESCSI=m
# CONFIG_IDE_TASK_IOCTL is not set
# CONFIG_IDE_TASKFILE_IO is not set

#
# IDE chipset support/bugfixes
#
CONFIG_BLK_DEV_IDEPCI=y
# CONFIG_IDEPCI_SHARE_IRQ is not set
# CONFIG_BLK_DEV_OFFBOARD is not set
# CONFIG_BLK_DEV_GENERIC is not set
# CONFIG_BLK_DEV_OPTI621 is not set
CONFIG_BLK_DEV_IDEDMA_PCI=y
# CONFIG_BLK_DEV_IDE_TCQ is not set
# CONFIG_BLK_DEV_IDEDMA_FORCED is not set
CONFIG_IDEDMA_PCI_AUTO=y
# CONFIG_IDEDMA_ONLYDISK is not set
# CONFIG_IDEDMA_PCI_WIP is not set
CONFIG_BLK_DEV_ADMA=y
# CONFIG_BLK_DEV_AEC62XX is not set
CONFIG_BLK_DEV_ALI15X3=m
# CONFIG_WDC_ALI15X3 is not set
# CONFIG_BLK_DEV_AMD74XX is not set
# CONFIG_BLK_DEV_CMD64X is not set
# CONFIG_BLK_DEV_TRIFLEX is not set
# CONFIG_BLK_DEV_CY82C693 is not set
# CONFIG_BLK_DEV_CS5520 is not set
# CONFIG_BLK_DEV_CS5530 is not set
# CONFIG_BLK_DEV_HPT34X is not set
# CONFIG_BLK_DEV_HPT366 is not set
# CONFIG_BLK_DEV_SC1200 is not set
# CONFIG_BLK_DEV_PIIX is not set
# CONFIG_BLK_DEV_NS87415 is not set
# CONFIG_BLK_DEV_PDC202XX_OLD is not set
# CONFIG_BLK_DEV_PDC202XX_NEW is not set
# CONFIG_BLK_DEV_SVWKS is not set
# CONFIG_BLK_DEV_SIIMAGE is not set
# CONFIG_BLK_DEV_SLC90E66 is not set
# CONFIG_BLK_DEV_TRM290 is not set
# CONFIG_BLK_DEV_VIA82CXXX is not set
CONFIG_BLK_DEV_IDEDMA=y
# CONFIG_IDEDMA_IVB is not set
CONFIG_IDEDMA_AUTO=y
# CONFIG_DMA_NONPCI is not set
# CONFIG_BLK_DEV_HD is not set

#
# SCSI device support
#
CONFIG_SCSI=y
CONFIG_SCSI_PROC_FS=y

#
# SCSI support type (disk, tape, CD-ROM)
#
CONFIG_BLK_DEV_SD=y
CONFIG_CHR_DEV_ST=m
CONFIG_CHR_DEV_OSST=m
CONFIG_BLK_DEV_SR=m
CONFIG_BLK_DEV_SR_VENDOR=y
CONFIG_CHR_DEV_SG=m

#
# Some SCSI devices (e.g. CD jukebox) support multiple LUNs #
CONFIG_SCSI_MULTI_LUN=y
CONFIG_SCSI_REPORT_LUNS=y
CONFIG_SCSI_CONSTANTS=y
# CONFIG_SCSI_LOGGING is not set

#
# SCSI low-level drivers
#
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_AACRAID is not set
# CONFIG_SCSI_AIC7XXX is not set
# CONFIG_SCSI_AIC7XXX_OLD is not set
# CONFIG_SCSI_AIC79XX is not set
# CONFIG_SCSI_ADVANSYS is not set
# CONFIG_SCSI_MEGARAID is not set
# CONFIG_SCSI_BUSLOGIC is not set
# CONFIG_SCSI_CPQFCTS is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_EATA is not set
# CONFIG_SCSI_EATA_PIO is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
# CONFIG_SCSI_GDTH is not set
# CONFIG_SCSI_IPS is not set
# CONFIG_SCSI_INIA100 is not set
# CONFIG_SCSI_PPA is not set
# CONFIG_SCSI_IMM is not set
CONFIG_SCSI_SYM53C8XX_2=y
CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=1
CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16
CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64
# CONFIG_SCSI_SYM53C8XX_IOMAPPED is not set
# CONFIG_SCSI_QLOGIC_ISP is not set
# CONFIG_SCSI_QLOGIC_FC is not set
# CONFIG_SCSI_QLOGIC_1280 is not set
# CONFIG_SCSI_QLOGICPTI is not set
# CONFIG_SCSI_DC395x is not set
# CONFIG_SCSI_NSP32 is not set
# CONFIG_SCSI_DEBUG is not set
# CONFIG_SCSI_SUNESP is not set

#
# Fibre Channel support
#
# CONFIG_FC4 is not set

#
# Fusion MPT device support
#
# CONFIG_FUSION is not set

#
# IEEE 1394 (FireWire) support (EXPERIMENTAL)
#
CONFIG_IEEE1394=m

#
# Subsystem Options
#
CONFIG_IEEE1394_VERBOSEDEBUG=y
CONFIG_IEEE1394_OUI_DB=y

#
# Device Drivers
#
# CONFIG_IEEE1394_PCILYNX is not set
CONFIG_IEEE1394_OHCI1394=m

#
# Protocol Drivers
#
CONFIG_IEEE1394_VIDEO1394=m
CONFIG_IEEE1394_SBP2=m
# CONFIG_IEEE1394_SBP2_PHYS_DMA is not set
CONFIG_IEEE1394_ETH1394=m
CONFIG_IEEE1394_DV1394=m
CONFIG_IEEE1394_RAWIO=m
CONFIG_IEEE1394_CMP=m
CONFIG_IEEE1394_AMDTP=m

#
# Networking support
#
CONFIG_NET=y

#
# Networking options
#
CONFIG_PACKET=m
CONFIG_PACKET_MMAP=y
CONFIG_NETLINK_DEV=m
CONFIG_UNIX=y
CONFIG_NET_KEY=m
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
# CONFIG_IP_ADVANCED_ROUTER is not set
# CONFIG_IP_PNP is not set
CONFIG_NET_IPIP=m
CONFIG_NET_IPGRE=m
# CONFIG_NET_IPGRE_BROADCAST is not set
CONFIG_IP_MROUTE=y
CONFIG_IP_PIMSM_V1=y
CONFIG_IP_PIMSM_V2=y
# CONFIG_ARPD is not set
CONFIG_INET_ECN=y
CONFIG_SYN_COOKIES=y
CONFIG_INET_AH=m
CONFIG_INET_ESP=m
CONFIG_INET_IPCOMP=m

#
# IP: Virtual Server Configuration
#
# CONFIG_IP_VS is not set
# CONFIG_IPV6 is not set
# CONFIG_DECNET is not set
# CONFIG_BRIDGE is not set
CONFIG_NETFILTER=y
CONFIG_NETFILTER_DEBUG=y

#
# IP: Netfilter Configuration
#
CONFIG_IP_NF_CONNTRACK=m
# CONFIG_IP_NF_FTP is not set
# CONFIG_IP_NF_IRC is not set
# CONFIG_IP_NF_TFTP is not set
# CONFIG_IP_NF_AMANDA is not set
CONFIG_IP_NF_QUEUE=m
CONFIG_IP_NF_IPTABLES=m
CONFIG_IP_NF_MATCH_LIMIT=m
CONFIG_IP_NF_MATCH_IPRANGE=m
CONFIG_IP_NF_MATCH_MAC=m
CONFIG_IP_NF_MATCH_PKTTYPE=m
CONFIG_IP_NF_MATCH_MARK=m
CONFIG_IP_NF_MATCH_MULTIPORT=m
CONFIG_IP_NF_MATCH_TOS=m
CONFIG_IP_NF_MATCH_RECENT=m
CONFIG_IP_NF_MATCH_ECN=m
CONFIG_IP_NF_MATCH_DSCP=m
CONFIG_IP_NF_MATCH_AH_ESP=m
CONFIG_IP_NF_MATCH_LENGTH=m
CONFIG_IP_NF_MATCH_TTL=m
CONFIG_IP_NF_MATCH_TCPMSS=m
CONFIG_IP_NF_MATCH_HELPER=m
CONFIG_IP_NF_MATCH_STATE=m
CONFIG_IP_NF_MATCH_CONNTRACK=m
CONFIG_IP_NF_MATCH_OWNER=m
CONFIG_IP_NF_FILTER=m
CONFIG_IP_NF_TARGET_REJECT=m
CONFIG_IP_NF_NAT=m
CONFIG_IP_NF_NAT_NEEDED=y
CONFIG_IP_NF_TARGET_MASQUERADE=m
CONFIG_IP_NF_TARGET_REDIRECT=m
CONFIG_IP_NF_TARGET_NETMAP=m
CONFIG_IP_NF_TARGET_SAME=m
CONFIG_IP_NF_NAT_LOCAL=y
CONFIG_IP_NF_NAT_SNMP_BASIC=m
CONFIG_IP_NF_MANGLE=m
CONFIG_IP_NF_TARGET_TOS=m
CONFIG_IP_NF_TARGET_ECN=m
CONFIG_IP_NF_TARGET_DSCP=m
CONFIG_IP_NF_TARGET_MARK=m
CONFIG_IP_NF_TARGET_CLASSIFY=m
CONFIG_IP_NF_TARGET_LOG=m
CONFIG_IP_NF_TARGET_ULOG=m
CONFIG_IP_NF_TARGET_TCPMSS=m
CONFIG_IP_NF_ARPTABLES=m
CONFIG_IP_NF_ARPFILTER=m
CONFIG_IP_NF_ARP_MANGLE=m
# CONFIG_IP_NF_COMPAT_IPCHAINS is not set
# CONFIG_IP_NF_COMPAT_IPFWADM is not set
CONFIG_XFRM=y
CONFIG_XFRM_USER=m

#
# SCTP Configuration (EXPERIMENTAL)
#
CONFIG_IPV6_SCTP__=y
# CONFIG_IP_SCTP is not set
# CONFIG_ATM is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_LLC2 is not set
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_NET_DIVERT is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
# CONFIG_NET_FASTROUTE is not set
# CONFIG_NET_HW_FLOWCONTROL is not set

#
# QoS and/or fair queueing
#
# CONFIG_NET_SCHED is not set

#
# Network testing
#
# CONFIG_NET_PKTGEN is not set
CONFIG_NETDEVICES=y

#
# ARCnet devices
#
# CONFIG_ARCNET is not set
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set
# CONFIG_ETHERTAP is not set

#
# Ethernet (10 or 100Mbit)
#
CONFIG_NET_ETHERNET=y
# CONFIG_MII is not set
# CONFIG_SUNLANCE is not set
CONFIG_HAPPYMEAL=y
# CONFIG_SUNBMAC is not set
# CONFIG_SUNQE is not set
CONFIG_SUNGEM=y
# CONFIG_NET_VENDOR_3COM is not set

#
# Tulip family network device support
#
# CONFIG_NET_TULIP is not set
# CONFIG_HP100 is not set
# CONFIG_NET_PCI is not set

#
# Ethernet (1000 Mbit)
#
# CONFIG_ACENIC is not set
# CONFIG_DL2K is not set
# CONFIG_E1000 is not set
# CONFIG_MYRI_SBUS is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_R8169 is not set
# CONFIG_SIS190 is not set
# CONFIG_SK98LIN is not set
# CONFIG_TIGON3 is not set

#
# Ethernet (10000 Mbit)
#
# CONFIG_IXGB is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
# CONFIG_PLIP is not set
# CONFIG_PPP is not set
# CONFIG_SLIP is not set

#
# Wireless LAN (non-hamradio)
#
# CONFIG_NET_RADIO is not set

#
# Token Ring devices
#
# CONFIG_TR is not set
# CONFIG_NET_FC is not set
# CONFIG_RCPCI is not set
# CONFIG_SHAPER is not set

#
# Wan interfaces
#
# CONFIG_WAN is not set

#
# Amateur Radio support
#
# CONFIG_HAMRADIO is not set

#
# IrDA (infrared) support
#
# CONFIG_IRDA is not set

#
# Bluetooth support
#
# CONFIG_BT is not set

#
# ISDN subsystem
#
# CONFIG_ISDN_BOOL is not set

#
# Telephony Support
#
# CONFIG_PHONE is not set

#
# Unix 98 PTY support
#
CONFIG_UNIX98_PTYS=y
CONFIG_UNIX98_PTY_COUNT=256

#
# XFree86 DRI support
#
# CONFIG_DRM is not set

#
# Input device support
#
CONFIG_INPUT=y

#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=y
CONFIG_INPUT_MOUSEDEV_PSAUX=y
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
# CONFIG_INPUT_JOYDEV is not set
# CONFIG_INPUT_TSDEV is not set
# CONFIG_INPUT_EVDEV is not set
# CONFIG_INPUT_EVBUG is not set

#
# Input I/O drivers
#
# CONFIG_GAMEPORT is not set
CONFIG_SOUND_GAMEPORT=y
CONFIG_SERIO=y
# CONFIG_SERIO_I8042 is not set
CONFIG_SERIO_SERPORT=y
# CONFIG_SERIO_CT82C710 is not set
# CONFIG_SERIO_PARKBD is not set
# CONFIG_SERIO_PCIPS2 is not set

#
# Input Device Drivers
#
# CONFIG_INPUT_KEYBOARD is not set
# CONFIG_INPUT_MOUSE is not set
# CONFIG_INPUT_JOYSTICK is not set
# CONFIG_INPUT_TOUCHSCREEN is not set
# CONFIG_INPUT_MISC is not set

#
# I2C support
#
CONFIG_I2C=m
CONFIG_I2C_CHARDEV=m

#
# I2C Algorithms
#
CONFIG_I2C_ALGOBIT=m
CONFIG_I2C_ALGOPCF=m

#
# I2C Hardware Bus support
#
CONFIG_I2C_ALI1535=m
CONFIG_I2C_ALI15X3=m
CONFIG_I2C_AMD756=m
CONFIG_I2C_AMD8111=m
CONFIG_I2C_ELEKTOR=m
CONFIG_I2C_I801=m
# CONFIG_I2C_I810 is not set
CONFIG_I2C_NFORCE2=m
CONFIG_I2C_PHILIPSPAR=m
CONFIG_I2C_PIIX4=m
CONFIG_I2C_PROSAVAGE=m
# CONFIG_I2C_SAVAGE4 is not set
CONFIG_SCx200_ACB=m
# CONFIG_I2C_SIS5595 is not set
# CONFIG_I2C_SIS630 is not set
CONFIG_I2C_SIS96X=m
# CONFIG_I2C_VIA is not set
CONFIG_I2C_VIAPRO=m
# CONFIG_I2C_VOODOO3 is not set

#
# I2C Hardware Sensors Chip support
#
CONFIG_I2C_SENSOR=m
CONFIG_SENSORS_ADM1021=m
# CONFIG_SENSORS_EEPROM is not set
CONFIG_SENSORS_IT87=m
CONFIG_SENSORS_LM75=m
CONFIG_SENSORS_LM78=m
CONFIG_SENSORS_LM85=m
CONFIG_SENSORS_VIA686A=m
CONFIG_SENSORS_W83781D=m

#
# File systems
#
# CONFIG_EXT2_FS is not set
CONFIG_EXT3_FS=y
CONFIG_EXT3_FS_XATTR=y
CONFIG_EXT3_FS_POSIX_ACL=y
CONFIG_EXT3_FS_SECURITY=y
CONFIG_JBD=y
# CONFIG_JBD_DEBUG is not set
CONFIG_FS_MBCACHE=y
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
CONFIG_FS_POSIX_ACL=y
# CONFIG_XFS_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
# CONFIG_QUOTA is not set
# CONFIG_AUTOFS_FS is not set
# CONFIG_AUTOFS4_FS is not set

#
# CD-ROM/DVD Filesystems
#
CONFIG_ISO9660_FS=m
CONFIG_JOLIET=y
# CONFIG_ZISOFS is not set
CONFIG_UDF_FS=m

#
# DOS/FAT/NT Filesystems
#
# CONFIG_FAT_FS is not set
# CONFIG_NTFS_FS is not set

#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
# CONFIG_DEVFS_FS is not set
CONFIG_DEVPTS_FS=y
CONFIG_DEVPTS_FS_XATTR=y
CONFIG_DEVPTS_FS_SECURITY=y
# CONFIG_TMPFS is not set
# CONFIG_HUGETLBFS is not set
# CONFIG_HUGETLB_PAGE is not set
CONFIG_RAMFS=y

#
# Miscellaneous filesystems
#
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
# CONFIG_CRAMFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set

#
# Network File Systems
#
# CONFIG_NFS_FS is not set
# CONFIG_NFSD is not set
# CONFIG_EXPORTFS is not set
# CONFIG_SMB_FS is not set
# CONFIG_CIFS is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_INTERMEZZO_FS is not set
# CONFIG_AFS_FS is not set

#
# Partition Types
#
CONFIG_PARTITION_ADVANCED=y
# CONFIG_ACORN_PARTITION is not set
# CONFIG_OSF_PARTITION is not set
# CONFIG_AMIGA_PARTITION is not set
# CONFIG_ATARI_PARTITION is not set
# CONFIG_MAC_PARTITION is not set
CONFIG_MSDOS_PARTITION=y
CONFIG_BSD_DISKLABEL=y
# CONFIG_MINIX_SUBPARTITION is not set
# CONFIG_SOLARIS_X86_PARTITION is not set
# CONFIG_UNIXWARE_DISKLABEL is not set
# CONFIG_LDM_PARTITION is not set
# CONFIG_NEC98_PARTITION is not set
# CONFIG_SGI_PARTITION is not set
# CONFIG_ULTRIX_PARTITION is not set
CONFIG_SUN_PARTITION=y
# CONFIG_EFI_PARTITION is not set
CONFIG_NLS=y

#
# Native Language Support
#
CONFIG_NLS_DEFAULT="iso8859-1"
# CONFIG_NLS_CODEPAGE_437 is not set
# CONFIG_NLS_CODEPAGE_737 is not set
# CONFIG_NLS_CODEPAGE_775 is not set
# CONFIG_NLS_CODEPAGE_850 is not set
# CONFIG_NLS_CODEPAGE_852 is not set
# CONFIG_NLS_CODEPAGE_855 is not set
# CONFIG_NLS_CODEPAGE_857 is not set
# CONFIG_NLS_CODEPAGE_860 is not set
# CONFIG_NLS_CODEPAGE_861 is not set
# CONFIG_NLS_CODEPAGE_862 is not set
# CONFIG_NLS_CODEPAGE_863 is not set
# CONFIG_NLS_CODEPAGE_864 is not set
# CONFIG_NLS_CODEPAGE_865 is not set
# CONFIG_NLS_CODEPAGE_866 is not set
# CONFIG_NLS_CODEPAGE_869 is not set
# CONFIG_NLS_CODEPAGE_936 is not set
# CONFIG_NLS_CODEPAGE_950 is not set
# CONFIG_NLS_CODEPAGE_932 is not set
# CONFIG_NLS_CODEPAGE_949 is not set
# CONFIG_NLS_CODEPAGE_874 is not set
# CONFIG_NLS_ISO8859_8 is not set
# CONFIG_NLS_CODEPAGE_1250 is not set
# CONFIG_NLS_CODEPAGE_1251 is not set
# CONFIG_NLS_ISO8859_1 is not set
# CONFIG_NLS_ISO8859_2 is not set
# CONFIG_NLS_ISO8859_3 is not set
# CONFIG_NLS_ISO8859_4 is not set
# CONFIG_NLS_ISO8859_5 is not set
# CONFIG_NLS_ISO8859_6 is not set
# CONFIG_NLS_ISO8859_7 is not set
# CONFIG_NLS_ISO8859_9 is not set
# CONFIG_NLS_ISO8859_13 is not set
# CONFIG_NLS_ISO8859_14 is not set
# CONFIG_NLS_ISO8859_15 is not set
# CONFIG_NLS_KOI8_R is not set
# CONFIG_NLS_KOI8_U is not set
# CONFIG_NLS_UTF8 is not set

#
# Multimedia devices
#
# CONFIG_VIDEO_DEV is not set

#
# Digital Video Broadcasting Devices
#
# CONFIG_DVB is not set

#
# Sound
#
# CONFIG_SOUND is not set

#
# USB support
#
CONFIG_USB=m
# CONFIG_USB_DEBUG is not set

#
# Miscellaneous USB options
#
CONFIG_USB_DEVICEFS=y
# CONFIG_USB_BANDWIDTH is not set
# CONFIG_USB_DYNAMIC_MINORS is not set

#
# USB Host Controller Drivers
#
CONFIG_USB_EHCI_HCD=m
CONFIG_USB_OHCI_HCD=m
CONFIG_USB_UHCI_HCD=m

#
# USB Device Class drivers
#
CONFIG_USB_BLUETOOTH_TTY=m
CONFIG_USB_ACM=m
CONFIG_USB_PRINTER=m
CONFIG_USB_STORAGE=m
# CONFIG_USB_STORAGE_DEBUG is not set
# CONFIG_USB_STORAGE_DATAFAB is not set
# CONFIG_USB_STORAGE_FREECOM is not set
# CONFIG_USB_STORAGE_ISD200 is not set
# CONFIG_USB_STORAGE_DPCM is not set
# CONFIG_USB_STORAGE_HP8200e is not set
# CONFIG_USB_STORAGE_SDDR09 is not set
# CONFIG_USB_STORAGE_SDDR55 is not set
# CONFIG_USB_STORAGE_JUMPSHOT is not set

#
# USB Human Interface Devices (HID)
#
CONFIG_USB_HID=m
# CONFIG_USB_HIDINPUT is not set
# CONFIG_USB_HIDDEV is not set

#
# USB HID Boot Protocol drivers
#
# CONFIG_USB_KBD is not set
# CONFIG_USB_MOUSE is not set
# CONFIG_USB_AIPTEK is not set
# CONFIG_USB_WACOM is not set
# CONFIG_USB_KBTAB is not set
# CONFIG_USB_POWERMATE is not set
# CONFIG_USB_XPAD is not set

#
# USB Imaging devices
#
CONFIG_USB_MDC800=m
# CONFIG_USB_SCANNER is not set
# CONFIG_USB_MICROTEK is not set
# CONFIG_USB_HPUSBSCSI is not set

#
# USB Multimedia devices
#
# CONFIG_USB_DABUSB is not set

#
# Video4Linux support is needed for USB Multimedia device support #

#
# USB Network adaptors
#
# CONFIG_USB_CATC is not set
# CONFIG_USB_KAWETH is not set
# CONFIG_USB_PEGASUS is not set
# CONFIG_USB_RTL8150 is not set
# CONFIG_USB_USBNET is not set

#
# USB port drivers
#
# CONFIG_USB_USS720 is not set

#
# USB Serial Converter support
#
# CONFIG_USB_SERIAL is not set

#
# USB Miscellaneous drivers
#
# CONFIG_USB_TIGL is not set
# CONFIG_USB_AUERSWALD is not set
# CONFIG_USB_RIO500 is not set
# CONFIG_USB_BRLVGER is not set
# CONFIG_USB_LCD is not set
# CONFIG_USB_TEST is not set
# CONFIG_USB_GADGET is not set

#
# Watchdog
#
# CONFIG_SOFT_WATCHDOG is not set

#
# Profiling support
#
# CONFIG_PROFILING is not set

#
# Kernel hacking
#
CONFIG_DEBUG_KERNEL=y
CONFIG_DEBUG_SLAB=y
CONFIG_MAGIC_SYSRQ=y
CONFIG_DEBUG_SPINLOCK=y
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
CONFIG_DEBUG_BUGVERBOSE=y
CONFIG_DEBUG_DCFLUSH=y
CONFIG_DEBUG_INFO=y
# CONFIG_STACK_DEBUG is not set

#
# Security options
#
CONFIG_SECURITY=y
CONFIG_SECURITY_NETWORK=y
CONFIG_SECURITY_CAPABILITIES=y
# CONFIG_SECURITY_ROOTPLUG is not set
CONFIG_SECURITY_SELINUX=y
# CONFIG_SECURITY_SELINUX_BOOTPARAM is not set
CONFIG_SECURITY_SELINUX_DEVELOP=y
# CONFIG_SECURITY_SELINUX_MLS is not set

#
# Cryptographic options
#
CONFIG_CRYPTO=y
CONFIG_CRYPTO_HMAC=y
# CONFIG_CRYPTO_NULL is not set
# CONFIG_CRYPTO_MD4 is not set
CONFIG_CRYPTO_MD5=m
CONFIG_CRYPTO_SHA1=m
# CONFIG_CRYPTO_SHA256 is not set
# CONFIG_CRYPTO_SHA512 is not set
CONFIG_CRYPTO_DES=m
# CONFIG_CRYPTO_BLOWFISH is not set
# CONFIG_CRYPTO_TWOFISH is not set
# CONFIG_CRYPTO_SERPENT is not set
CONFIG_CRYPTO_AES=m
# CONFIG_CRYPTO_CAST5 is not set
# CONFIG_CRYPTO_CAST6 is not set
CONFIG_CRYPTO_DEFLATE=m
# CONFIG_CRYPTO_TEST is not set

#
# Library routines
#
CONFIG_CRC32=y
CONFIG_ZLIB_INFLATE=m
CONFIG_ZLIB_DEFLATE=m

PROMLIB: Sun IEEE Boot Prom 4.0.4 2001/03/22 15:42
Linux version 2.6.0-test6 (root@szoketto) (gcc version 3.3.2 20030908 (Debian prerelease)) #2 Thu Oct 2 06:06:11 UTC 2003
ARCH: SUN4U
Ethernet address: 00:03:ba:0f:be:95
On node 0 totalpages: 64859
DMA zone: 64859 pages, LIFO batch:8
Normal zone: 0 pages, LIFO batch:1
HighMem zone: 0 pages, LIFO batch:1
Building zonelist for node : 0
Kernel command line: root=/dev/sda1 ro -p console=ttyS0
PID hash table entries: 4096 (order 12: 65536 bytes)
Console: colour dummy device 80x25
Memory: 509760k available (2240k kernel code, 808k data, 128k init) [fffff80000000000,000000002fea6000] Calibrating delay loop... 999.42 BogoMIPS
Security Scaffold v1.0.0 initialized

SELinux:  Initializing.
SELinux:  Starting in permissive mode

There is already a security framework initialized, register_security failed.
Failure registering capabilities with the kernel
selinux_register_security: Registering secondary module capability
Capability LSM initialized
Dentry cache hash table entries: 65536 (order: 6, 524288 bytes)
Inode-cache hash table entries: 32768 (order: 5, 262144 bytes)
Mount-cache hash table entries: 512 (order: 0, 8192 bytes)
POSIX conformance testing by UNIFIX
kernel/sched.c:761: spin_unlock(arch/sparc64/kernel/init_task.c:0000000000675e10) not locked
NET: Registered protocol family 16
PCI: Probing for controllers.
PCI: Found SABRE, main regs at 000001fe00000000, wsync at 000001fe00001c20
SABRE: Shared PCI config space at 000001fe01000000
SABRE: DVMA at c0000000 [20000000]
PCI: 0000:00:01.2: class 5c5c doesn't match header type 01. Ignoring class.
PCI-IRQ: Routing bus[ 2] slot[ 8] map[0] to INO[20]
PCI-IRQ: Routing bus[ 2] slot[ 8] map[0] to INO[20]
PCI-IRQ: Routing bus[ 3] slot[ 0] map[1] to INO[05]
PCI-IRQ: Routing bus[ 3] slot[ 1] map[1] to INO[14]
PCI-IRQ: Routing bus[ 3] slot[ 2] map[1] to INO[04]
PCI-IRQ: Routing bus[ 3] slot[ 3] map[1] to INO[15]
PCI0(PBMA): Bus running at 33MHz
PCI-IRQ: Routing bus[ 1] slot[ 5] map[0] to INO[1c]
PCI-IRQ: Routing bus[ 1] slot[ 5] map[0] to INO[26]
PCI-IRQ: Routing bus[ 1] slot[ c] map[0] to INO[06]
PCI-IRQ: Routing bus[ 1] slot[ c] map[0] to INO[24]
PCI-IRQ: Routing bus[ 1] slot[ d] map[0] to INO[0c]
PCI0(PBMB): Bus running at 33MHz
isa0: [power] [serial] [serial]
ebus0: [flashprom] [eeprom] [idprom] [SUNW,lomh]
SCSI subsystem initialized
ikconfig 0.7 with /proc/config*
Initializing Cryptographic API
pty: 256 Unix98 ptys configured
rtc_init: no PC rtc found
drivers/serial/sunsu.c:1149: spin_is_locked on uninitialized spinlock 0000000000757a78. drivers/serial/sunsu.c:1284: spin_is_locked on uninitialized spinlock 0000000000757a78. drivers/serial/sunsu.c:1149: spin_is_locked on uninitialized spinlock 0000000000757be0. drivers/serial/sunsu.c:1284: spin_is_locked on uninitialized spinlock 0000000000757be0.
ttyS0 at MMIO 0x1fe020003f8 (irq = 0) is a 16550A
ttyS1 at MMIO 0x1fe020002e8 (irq = 0) is a 16550A
Using anticipatory io scheduler
sunhme.c:v2.02 24/Aug/2003 David S. Miller ([email protected])
eth0-3: Quattro HME (PCI/CheerIO) 10/100baseT Ethernet unknown bridge 8086.b154
eth0: Quattro HME slot 0 (PCI/CheerIO) 10/100baseT Ethernet 08:00:20:e9:d4:38
eth1: Quattro HME slot 1 (PCI/CheerIO) 10/100baseT Ethernet 08:00:20:e9:d4:39
eth2: Quattro HME slot 2 (PCI/CheerIO) 10/100baseT Ethernet 08:00:20:e9:d4:3a
eth3: Quattro HME slot 3 (PCI/CheerIO) 10/100baseT Ethernet 08:00:20:e9:d4:3b
sungem.c:v0.98 8/24/03 David S. Miller ([email protected])
eth4: Sun GEM (PCI) 10/100/1000BaseT Ethernet 00:03:ba:0f:be:96
eth4: Found Generic MII PHY
eth5: Sun GEM (PCI) 10/100/1000BaseT Ethernet 00:03:ba:0f:be:95
eth5: Found Generic MII PHY
sym0: <896> rev 0x7 at pci 0000:02:08.0 irq 4,7e0
sym0: No NVRAM, ID 7, Fast-40, LVD, parity checking
sym0: SCSI BUS has been reset.
scsi0 : sym-2.1.18b
Vendor: SEAGATE Model: ST318305LSUN18G Rev: 0340
Type: Direct-Access ANSI SCSI revision: 03
sym0:0:0: tagged command queuing enabled, command queue depth 16.
sym0:0: FAST-40 WIDE SCSI 80.0 MB/s ST (25.0 ns, offset 31)
sym1: <896> rev 0x7 at pci 0000:02:08.1 irq 4,7e0
sym1: No NVRAM, ID 7, Fast-40, LVD, parity checking
sym1: SCSI BUS has been reset.
scsi1 : sym-2.1.18b
SCSI device sda: 35378533 512-byte hdwr sectors (18114 MB)
SCSI device sda: drive cache: write through
sda: sda1 sda2 sda3
Attached scsi disk sda at scsi0, channel 0, id 0, lun 0
mice: PS/2 mouse device common for all mice
device-mapper: 4.0.0-ioctl (2003-06-04) initialised: [email protected]
NET: Registered protocol family 2
IP: routing cache hash table of 1024 buckets, 56Kbytes
TCP: Hash tables configured (established 65536 bind 9362)
NET: Registered protocol family 1
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
VFS: Mounted root (ext3 filesystem) readonly.
drivers/serial/sunsu.c:298: spin_lock(drivers/serial/serial_core.c:0000000000757a78) already locked by drivers/serial/serial_core.c/1258 drivers/serial/serial_core.c:1260: spin_unlock(drivers/serial/serial_core.c:0000000000757a78) not locked drivers/serial/sunsu.c:298: spin_lock(drivers/serial/serial_core.c:0000000000757a78) already locked by drivers/serial/serial_core.c/1258 drivers/serial/serial_core.c:1260: spin_unlock(drivers/serial/serial_core.c:0000000000757a78) not locked drivers/serial/sunsu.c:298: spin_lock(drivers/serial/serial_core.c:0000000000757a78) already locked by drivers/serial/serial_core.c/1258 Adding 306264k swap on /dev/sda2. Priority:-1 extents:1
EXT3 FS on sda1, internal journal
kernel BUG at arch/sparc64/kernel/module.c:207!

              \|/ ____ \|/
              "@'/ .. \`@"
              /_| \__/ |_\
                 \__U_/

modprobe(51): Kernel bad sw trap 5 [#1]
TSTATE: 0000000011009606 TPC: 00000000004402f0 TNPC: 00000000004402f4 Y: ffffed7c Not tainted
TPC: <apply_relocate_add+0x230/0x240>
g0: 0000000000000000 g1: 000000000067ac00 g2: 0000000000000001 g3: 00000000000001f9
g4: fffff8002eff70a0 g5: 0000000000000000 g6: fffff80000e28000 g7: 0000000000000000
o0: 0000000000000030 o1: 000000000067ac00 o2: 000000000067ac00 o3: 0000000000000000
o4: 0000000000000000 o5: 000000000073c2f0 sp: fffff80000e2b331 ret_pc: 00000000004402e8
RPC: <apply_relocate_add+0x228/0x240>
l0: 0000000000000fd8 l1: 00000000020039e8 l2: 00000000000000aa l3: 00000000000000aa
l4: 000000000000fff1 l5: 0000000000000000 l6: 000000000000fff2 l7: 8000000000000000
i0: 00000001400492c8 i1: 00000000020049d8 i2: 0000000000000025 i3: 0000000000000017
i4: 0000000002005500 i5: 0000000002005500 i6: fffff80000e2b3f1 i7: 0000000000470e74
I7: <load_module+0x794/0x8a0>
Instruction DUMP: 921020cf 7fff6f2e 90122278 <91d02005> 81cfe008 01000000 01000000 81c3e008 90102000 kjournald starting. Commit interval 5 seconds
EXT3 FS on dm-1, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS on dm-0, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
eth5: Link is up at 10 Mbps, half-duplex.
eth5: Pause is disabled

ksymoops 2.4.9 on sparc64 2.6.0-test6. Options used
-V (default)
-k /proc/ksyms (default)
-l /proc/modules (default)
-o /lib/modules/2.6.0-test6/ (default) -m /boot/System.map-2.6.0-test6 (default)

Warning: You did not tell me where to find symbol information. I will assume that the log matches the kernel and modules that are running right now and I'll use the default options above for symbol resolution. If the current kernel and/or modules do not match the log, you can get more accurate output by telling me the kernel version and where to find map, modules, ksyms etc. ksymoops -h explains the options.

Error (regular_file): read_ksyms stat /proc/ksyms failed No modules in ksyms, skipping objects
No ksyms, skipping lsmod
kernel BUG at arch/sparc64/kernel/module.c:207!

              \|/ ____ \|/
              "@'/ .. \`@"
              /_| \__/ |_\
                 \__U_/

modprobe(51): Kernel bad sw trap 5 [#1]
TSTATE: 0000000011009606 TPC: 00000000004402f0 TNPC: 00000000004402f4 Y: ffffed7c Not tainted
Using defaults from ksymoops -t elf32-sparc -a sparc
g0: 0000000000000000 g1: 000000000067ac00 g2: 0000000000000001 g3: 00000000000001f9
g4: fffff8002eff70a0 g5: 0000000000000000 g6: fffff80000e28000 g7: 0000000000000000
o0: 0000000000000030 o1: 000000000067ac00 o2: 000000000067ac00 o3: 0000000000000000
o4: 0000000000000000 o5: 000000000073c2f0 sp: fffff80000e2b331 ret_pc: 00000000004402e8
l0: 0000000000000fd8 l1: 00000000020039e8 l2: 00000000000000aa l3: 00000000000000aa
l4: 000000000000fff1 l5: 0000000000000000 l6: 000000000000fff2 l7: 8000000000000000
i0: 00000001400492c8 i1: 00000000020049d8 i2: 0000000000000025 i3: 0000000000000017
i4: 0000000002005500 i5: 0000000002005500 i6: fffff80000e2b3f1 i7: 0000000000470e74

Quoted 12 lines

Quoted 12 lines
PC; 004402f0 <apply_relocate_add+230/240> <=====
g1; 0067ac00 <abi_table+100/230>
o1; 0067ac00 <abi_table+100/230>
o2; 0067ac00 <abi_table+100/230>
o5; 0073c2f0 <printk_buf.4+30/400>
ret_pc; 004402e8 <apply_relocate_add+228/240> l1; 020039e8 <__crc_pci_unregister_driver+22b6a6/384df7> i1; 020049d8 <__crc_pci_unregister_driver+22c696/384df7> i4; 02005500 <__crc_pci_unregister_driver+22d1be/384df7> i5; 02005500 <__crc_pci_unregister_driver+22d1be/384df7> i7; 00470e74 <load_module+794/8a0>

Instruction DUMP: 921020cf 7fff6f2e 90122278 <91d02005> 81cfe008 01000000 01000000 81c3e008 90102000

Code; 004402e4 <apply_relocate_add+224/240>
00000000 <_PC>:
Code; 004402e4 <apply_relocate_add+224/240>
0: 92 10 20 cf mov 0xcf, %o1
Code; 004402e8 <apply_relocate_add+228/240>
4: 7f ff 6f 2e call fffdbcbc <_PC+0xfffdbcbc>
Code; 004402ec <apply_relocate_add+22c/240>
8: 90 12 22 78 or %o0, 0x278, %o0
Code; 004402f0 <apply_relocate_add+230/240>
c: 91 d0 20 05 ta 5
Code; 004402f4 <apply_relocate_add+234/240>
10: 81 cf e0 08 rett %i7 + 8
Code; 004402f8 <apply_relocate_add+238/240>
14: 01 00 00 00 nop
Code; 004402fc <apply_relocate_add+23c/240>
18: 01 00 00 00 nop
Code; 00440300 <module_finalize+0/20>
1c: 81 c3 e0 08 retl
Code; 00440304 <module_finalize+4/20>
20: 90 10 20 00 clr %o0 ! 0 <_PC>

1 warning and 1 error issued. Results may not be reliable.

If some fields are empty or look unusual you may have an old version. Compare to the current minimal requirements in Documentation/Changes.

Linux szoketto 2.6.0-test6 #2 Thu Oct 2 06:06:11 UTC 2003 sparc64 GNU/Linux

Gnu C                  3.3.2
Gnu make               3.80
util-linux             2.12
mount                  2.12
e2fsprogs              1.35-WIP
Linux C Library        2.3.2
Dynamic linker (ldd)   2.3.2
Procps                 3.1.12
Net-tools              1.60
Kbd                    76:
Sh-utils               5.0.90

If some fields are empty or look unusual you may have an old version. Compare to the current minimal requirements in Documentation/Changes.

Linux szoketto 2.6.0-test6 #2 Thu Oct 2 06:06:11 UTC 2003 sparc64 GNU/Linux

Gnu C                  18:
util-linux             2.11z
mount                  2.11z
e2fsprogs              1.34-WIP
Linux C Library        2.3.2
Dynamic linker (ldd)   2.3.2
Procps                 3.1.9
Net-tools              1.60
Console-tools          0.2.3
Sh-utils               5.0

David S. Miller

2003-10-03 06:44 UTC #1 lore raw

Quoted 3 lines · On 02 Oct 2003 18:50:49 +0200 Magosányi Árpád <[email protected]> wrote:

Loading modules...
iptable_filter
kernel BUG at arch/sparc64/kernel/module.c:207!

Most modules do not trigger this, because I am loading all kinds of modules on sparc64 successfully.

Is it only the iptable module that triggers this?

If many modules do this for you, I rather suspect your build environment.