Skip to contentSkip to conversation

CD SPDIF in Soundblaster Live 5.1 working?

DISCUSSION Juha 2 participants 5 messages Oct 6, 2003 – Oct 14, 2003

lore
Share & tools
lore

Juha

author
#0 lore raw

Hi there,

I'm trying to route spdif signal from my dvb card through my soundcard, a sb live 5.1, to my amplifier. My amplifier states that it's 48kHz spdif signal. I connected the spdif out of the dvb card to the "CD SPDIF" connector of the sb live card. Is this the proper way to do it, ie, should it work or could it be made to work?

I've tried to get some clue about alsamixer settings from

http://alsa.opensrc.org/?SBliveMixer

Quoted 1 line

From the above webpage I get the idea, that spdif capture should be

possible with alsa drivers. Especially the "IEC958 TTL Capture Volume" switch sounds like it could turn on spdif input. The webpage also states that:

...
This PCM device (it's the 4th PCM device (index 3!) and first subdevice (index 0) for a given card) allows to forward 48kHz, stereo, 16-bit little endian streams without any modifications to the digital output (coaxial or optical).
...

And this (if I understand correctly) is exactly what I want to do. But, for some reason, I can't see the 4th PCM device. A listing of the capture devices don't list that as an option:

bash:~# arecord -l
**** List of CAPTURE Hardware Devices ****
card 0: Live [Sound Blaster Live!], device 0: emu10k1 [EMU10K1]
  Subdevices: 1/1
  Subdevice #0: subdevice #0
card 0: Live [Sound Blaster Live!], device 1: emu10k1 mic [EMU10K1 MIC]
  Subdevices: 1/1
  Subdevice #0: subdevice #0
card 0: Live [Sound Blaster Live!], device 2: emu10k1 efx [EMU10K1 EFX]
  Subdevices: 1/1
  Subdevice #0: subdevice #0

I've tried different options to snd-emu10k1. Currently I'm using the following line, since it gives me the most options to play with.

options snd-emu10k1 extin=0x3fff extout=0x1fff

I'm using version 0.9.7 of the driver. Any help would be *greatly* appreciated. Is this even possible with the card, I'm pretty clueless at the moment.

Best regards,

Juha

-------------------------------------------------------
This sf.net email is sponsored by:ThinkGeek
Welcome to geek heaven.
http://thinkgeek.com/sf

#1 lore raw
Quoted 5 lines · Juha

I'm trying to route spdif signal from my dvb card through my soundcard, a sb live 5.1, to my amplifier. My amplifier states that it's 48kHz spdif signal. I connected the spdif out of the dvb card to the "CD SPDIF" connector of the sb live card. Is this the proper way to do it, ie, should it work or could it be made to work?

The standard voltage for S/PDIF signals is 0.5V, but the name "CD SPDIF" (and the "TTL" in the name of ther mixer control) implies that the SB wants to have 5V.

Quoted 8 lines

This PCM device (it's the 4th PCM device (index 3!) and first subdevice (index 0) for a given card) allows to forward 48kHz, stereo, 16-bit little endian streams without any modifications to the digital output (coaxial or optical).

And this (if I understand correctly) is exactly what I want to do. But, for some reason, I can't see the 4th PCM device. A listing of the capture devices don't list that as an option:

Device 3 is playback only. As far as I can see, you can only record from S/PDIF by mixing it with other input signals to device 0.

HTH
Clemens

-------------------------------------------------------
This sf.net email is sponsored by:ThinkGeek
Welcome to geek heaven.
http://thinkgeek.com/sf

author
#2 lore raw

On Tue, 2003-10-07 at 12:19, Clemens Ladisch wrote:

Hi there Clemens,

Quoted 10 lines
Quoted 5 lines · Juha

I'm trying to route spdif signal from my dvb card through my soundcard, a sb live 5.1, to my amplifier. My amplifier states that it's 48kHz spdif signal. I connected the spdif out of the dvb card to the "CD SPDIF" connector of the sb live card. Is this the proper way to do it, ie, should it work or could it be made to work?

The standard voltage for S/PDIF signals is 0.5V, but the name "CD SPDIF" (and the "TTL" in the name of ther mixer control) implies that the SB wants to have 5V.

Actually, that's allright, since the spdif output of the DVB card produces exactly that, as I understand ;)

Quoted 11 lines
Quoted 8 lines

This PCM device (it's the 4th PCM device (index 3!) and first subdevice (index 0) for a given card) allows to forward 48kHz, stereo, 16-bit little endian streams without any modifications to the digital output (coaxial or optical).

And this (if I understand correctly) is exactly what I want to do. But, for some reason, I can't see the 4th PCM device. A listing of the capture devices don't list that as an option:

Device 3 is playback only. As far as I can see, you can only record from S/PDIF by mixing it with other input signals to device 0.

Ok, gotta try that then. What about routing the signal to the spdif output of the soundblaster. Do you know how to enable that?

Quoted 5 lines

HTH
Clemens

Thank You very much, you've been very helpful.

Juha

-------------------------------------------------------
This sf.net email is sponsored by:ThinkGeek
Welcome to geek heaven.
http://thinkgeek.com/sf

#3 lore raw
Quoted 6 lines · Juha
Quoted 2 lines · Clemens Ladisch

Device 3 is playback only. As far as I can see, you can only record from S/PDIF by mixing it with other input signals to device 0.

Ok, gotta try that then. What about routing the signal to the spdif output of the soundblaster. Do you know how to enable that?

I guess there's a mixer control to route the mixed output (including the SPDIF input) to the SPDIF output.

HTH
Clemens

-------------------------------------------------------
This SF.net email is sponsored by: SF.net Giveback Program. SourceForge.net hosts over 70,000 Open Source Projects. See the people who have HELPED US provide better services:
Click here: http://sourceforge.net/supporters.php

author
#4 lore raw

Hi Clemens,

Well, finally got time to test it out and everything works perfectly. The "IEC958 TTL Volume" control actually controls the volume of the "CD SPDIF" input.

Thanks for your help,

Juha

Quoted 18 lines · Clemens Ladisch
Quoted 6 lines · Juha
Quoted 2 lines · Clemens Ladisch

Device 3 is playback only. As far as I can see, you can only record from S/PDIF by mixing it with other input signals to device 0.

Ok, gotta try that then. What about routing the signal to the spdif output of the soundblaster. Do you know how to enable that?

I guess there's a mixer control to route the mixed output (including the SPDIF input) to the SPDIF output.

HTH
Clemens

Quoted 9 lines

-------------------------------------------------------
This SF.net email is sponsored by: SF.net Giveback Program. SourceForge.net hosts over 70,000 Open Source Projects. See the people who have HELPED US provide better services:
Click here: http://sourceforge.net/supporters.php
_______________________________________________
Alsa-devel mailing list [email protected]
https://lists.sourceforge.net/lists/listinfo/alsa-devel

-------------------------------------------------------
This SF.net email is sponsored by: SF.net Giveback Program. SourceForge.net hosts over 70,000 Open Source Projects. See the people who have HELPED US provide better services:
Click here: http://sourceforge.net/supporters.php