Edirol DA-2496
A message that is not in the archive (sent off-list or not yet received): 1065725439.2728.136.camel@turandot
Jaroslav, Takashi, any comments on this?
Quoted 27 lines · Jonatan de la Torre
Quoted 17 lines · Clemens Ladisch
Quoted 3 lines · Jonatan de la Torre
* One IC whose PCB tag is IC38
CS8420-CS
sample rate converter
Quoted 3 lines
* Four IC's whose PCB tags are IC17, IC22, IC27, IC32
AK4524VF
stereo 24bit 96kHz DAC/ADC
These chips are used on M-Audio cards, too.
Quoted 1 line
Anything else before I close the box?
Quoted 9 lines
Please try to load the snd-ice1712 driver, and show the contents of the
/proc/asound/cardX/ice1712file. The driver might actually work with your card.If not, the EEPROM subvendor/device ID has to be added to the driver. Your card looks as if it might be compatible to the Delta 1010LT; if it isn't, we have to know to which pins of the ICE1712 the other chips are connected.
Quoted 6 lines
Hi Clemens and people, here I am again, this is the contents of
/proc/asound/card0/ice1712
ICEnsemble ICE1712 at0xd400, irq 15EEPROM:
Subvendor :0xce164010
This isn't one of the known IDs.
Quoted 23 lines
Size : 29 bytes Version : 1 Codec : 0x1f ACLink : 0x80 I2S ID : 0x71 S/PDIF : 0x0 GPIO mask : 0xfc GPIO state : 0x2 GPIO direction : 0x3 AC'97 main : 0x0 AC'97 pcm : 0x0 AC'97 record : 0x0 AC'97 record src : 0x44 DAC ID #0 : 0x7 DAC ID #1 : 0x7 DAC ID #2 : 0x7 DAC ID #3 : 0x7 ADC ID #0 : 0x7 ADC ID #1 : 0x7 ADC ID #2 : 0x7 ADC ID #3 : 0x7 Extra #28 : 0x0
Quoted 8 lines
Registers:
PSDOUT03 : 0x0000 CAPTURE : 0x00000000 SPDOUT : 0x800f RATE : 0x08The driver almost works but how can I know wich one ? I think that only OSS driver works but ALSA not.
There is no OSS driver AFAIK, and the OSS emulation uses the ALSA driver.
Quoted 1 line
Maybe the owner manual helps you. I can send the pdf file
It won't help unless it shows how the chips are wired.
Quoted 1 line
How do I do to know the conections? I follow the tracks on the board?
Yes, preferably with a multimeter. I think the interesting connections are only those going though the connecting cable.
Regards,
Clemens
-------------------------------------------------------
This SF.net email is sponsored by: SF.net Giveback Program. SourceForge.net hosts over 70,000 Open Source Projects. See the people who have HELPED US provide better services:
Click here: http://sourceforge.net/supporters.php
At Fri, 10 Oct 2003 18:43:17 +0200 (METDST),
Quoted 70 lines · Clemens Ladisch
Jaroslav, Takashi, any comments on this?
Quoted 27 lines · Jonatan de la Torre
Quoted 17 lines · Clemens Ladisch
Quoted 3 lines · Jonatan de la Torre
* One IC whose PCB tag is IC38
CS8420-CS
sample rate converter
Quoted 3 lines
* Four IC's whose PCB tags are IC17, IC22, IC27, IC32
AK4524VF
stereo 24bit 96kHz DAC/ADC
These chips are used on M-Audio cards, too.
Quoted 1 line
Anything else before I close the box?
Quoted 9 lines
Please try to load the snd-ice1712 driver, and show the contents of the
/proc/asound/cardX/ice1712file. The driver might actually work with your card.If not, the EEPROM subvendor/device ID has to be added to the driver. Your card looks as if it might be compatible to the Delta 1010LT; if it isn't, we have to know to which pins of the ICE1712 the other chips are connected.
Quoted 6 lines
Hi Clemens and people, here I am again, this is the contents of
/proc/asound/card0/ice1712
ICEnsemble ICE1712 at0xd400, irq 15EEPROM:
Subvendor :0xce164010This isn't one of the known IDs.
Quoted 29 lines
Size : 29 bytes Version : 1 Codec : 0x1f ACLink : 0x80 I2S ID : 0x71 S/PDIF : 0x0 GPIO mask : 0xfc GPIO state : 0x2 GPIO direction : 0x3 AC'97 main : 0x0 AC'97 pcm : 0x0 AC'97 record : 0x0 AC'97 record src : 0x44 DAC ID #0 : 0x7 DAC ID #1 : 0x7 DAC ID #2 : 0x7 DAC ID #3 : 0x7 ADC ID #0 : 0x7 ADC ID #1 : 0x7 ADC ID #2 : 0x7 ADC ID #3 : 0x7 Extra #28 : 0x0Registers:
PSDOUT03 : 0x0000 CAPTURE : 0x00000000 SPDOUT : 0x800f RATE : 0x08
Quoted 5 lines
Quoted 2 lines
The driver almost works but how can I know wich one ? I think that only OSS driver works but ALSA not.
There is no OSS driver AFAIK, and the OSS emulation uses the ALSA driver.
he meant the commercial OSS?
Quoted 9 lines
Quoted 2 lines
Maybe the owner manual helps you. I can send the pdf file
It won't help unless it shows how the chips are wired.
Quoted 1 line
How do I do to know the conections? I follow the tracks on the board?
Yes, preferably with a multimeter. I think the interesting connections are only those going though the connecting cable.
the first step is to add the subvendor id above to the list in delta.c, and try Delta1010LT callbacks.
if it doesn't work, the best would be to ask the hardware vendor for this data (stressing that we need ONLY this connection data, not the whole datasheet)...
Takashi
-------------------------------------------------------
This SF.net email is sponsored by: SF.net Giveback Program. SourceForge.net hosts over 70,000 Open Source Projects. See the people who have HELPED US provide better services:
Click here: http://sourceforge.net/supporters.php
Quoted 75 lines · Clemens Ladisch
Jaroslav, Takashi, any comments on this?
Quoted 27 lines · Jonatan de la Torre
Quoted 17 lines · Clemens Ladisch
Quoted 3 lines · Jonatan de la Torre
* One IC whose PCB tag is IC38
CS8420-CS
sample rate converter
Quoted 3 lines
* Four IC's whose PCB tags are IC17, IC22, IC27, IC32
AK4524VF
stereo 24bit 96kHz DAC/ADC
These chips are used on M-Audio cards, too.
Quoted 1 line
Anything else before I close the box?
Quoted 9 lines
Please try to load the snd-ice1712 driver, and show the contents of the
/proc/asound/cardX/ice1712file. The driver might actually work with your card.If not, the EEPROM subvendor/device ID has to be added to the driver. Your card looks as if it might be compatible to the Delta 1010LT; if it isn't, we have to know to which pins of the ICE1712 the other chips are connected.
Quoted 6 lines
Hi Clemens and people, here I am again, this is the contents of
/proc/asound/card0/ice1712
ICEnsemble ICE1712 at0xd400, irq 15EEPROM:
Subvendor :0xce164010This isn't one of the known IDs.
Quoted 23 lines
Size : 29 bytes Version : 1 Codec : 0x1f ACLink : 0x80 I2S ID : 0x71 S/PDIF : 0x0 GPIO mask : 0xfc GPIO state : 0x2 GPIO direction : 0x3 AC'97 main : 0x0 AC'97 pcm : 0x0 AC'97 record : 0x0 AC'97 record src : 0x44 DAC ID #0 : 0x7 DAC ID #1 : 0x7 DAC ID #2 : 0x7 DAC ID #3 : 0x7 ADC ID #0 : 0x7 ADC ID #1 : 0x7 ADC ID #2 : 0x7 ADC ID #3 : 0x7 Extra #28 : 0x0Quoted 8 lines
Registers:
PSDOUT03 : 0x0000 CAPTURE : 0x00000000 SPDOUT : 0x800f RATE : 0x08The driver almost works but how can I know wich one ? I think that only OSS driver works but ALSA not.
There is no OSS driver AFAIK, and the OSS emulation uses the ALSA driver.
Quoted 8 lines
Quoted 1 line
Maybe the owner manual helps you. I can send the pdf file
It won't help unless it shows how the chips are wired.
Quoted 1 line
How do I do to know the conections? I follow the tracks on the board?
Yes, preferably with a multimeter. I think the interesting connections are only those going though the connecting cable.
Well, it does not help much. All outputs are separated from the digital I/O. You need a datasheet for Envy24 (ICE1712) and try to find connections of GPIO pins to AK4524 and CS8420 so that we can properly initialize these chips.
Jaroslav
-----
Jaroslav Kysela <[email protected]>
Linux Kernel Sound Maintainer
ALSA Project, SuSE Labs
-------------------------------------------------------
This SF.net email is sponsored by: SF.net Giveback Program. SourceForge.net hosts over 70,000 Open Source Projects. See the people who have HELPED US provide better services:
Click here: http://sourceforge.net/supporters.php
A message that is not in the archive (sent off-list or not yet received): 1066055153.3338.2.camel@turandot
At Mon, 13 Oct 2003 16:25:53 +0200,
Quoted 3 lines · Jonatan de la Torre
Ice1712 has 128 pins,
Which among them should I test?
did you try to add the id as delta 1010LT?
Takashi
-------------------------------------------------------
This SF.net email is sponsored by: SF.net Giveback Program. SourceForge.net hosts over 70,000 Open Source Projects. See the people who have HELPED US provide better services:
Click here: http://sourceforge.net/supporters.php
A message that is not in the archive (sent off-list or not yet received): 1066056732.3338.9.camel@turandot
At Mon, 13 Oct 2003 16:52:13 +0200,
Quoted 5 lines · Jonatan de la Torre
Quoted 3 lines · Takashi Iwai
At Mon, 13 Oct 2003 16:25:53 +0200,
Quoted 1 line · Jonatan de la Torre
Quoted 8 lines
Quoted 6 lines
Quoted 2 lines
Ice1712 has 128 pins,
Which among them should I test?did you try to add the id as delta 1010LT?
Sorry but I don't know. I edit this file:
/usr/src/alsa/alsa-driver-0.9.7a/alsa-kernel/pci/ice1712/delta.c
as a test, simply replace ICE1712_SUBDEVICE_DELTA1010LT definition in delta.h with your id (0xce164010).
then it should appear as if delta 1010LT.
Quoted 7 lines
But what should I do? I can't programm. Please tell me which line to search and what tag to replace.
Thank You.
At the moment I downloaded datasheets from envy1712, AK4524 and CS8420 and printed the pin descriptions of each one to follow the tracks on the board.
only GPIO pins are used for communication with the codec chips. usually there are two or three pins via I2C or SPI mode for clock, data, and chip-select.
Takashi
-------------------------------------------------------
This SF.net email is sponsored by: SF.net Giveback Program. SourceForge.net hosts over 70,000 Open Source Projects. See the people who have HELPED US provide better services:
Click here: http://sourceforge.net/supporters.php
A message that is not in the archive (sent off-list or not yet received): 1066146865.3309.75.camel@turandot
At Tue, 14 Oct 2003 17:54:25 +0200,
Quoted 9 lines · Jonatan de la Torre
Quoted 5 lines · Takashi Iwai
Quoted 4 lines
Quoted 2 lines
Sorry but I don't know. I edit this file:
/usr/src/alsa/alsa-driver-0.9.7a/alsa-kernel/pci/ice1712/delta.cPerhaps, just a silly question: take a look at this extract from
delta.c, da-2496 has CS-8420 codec, not CS8427. Doesn't it matter?
it could matter. but let's just try :)
Quoted 56 lines
/* assert chip select */
static unsigned charap_cs8427_codec_select(ice1712_t *ice){ unsigned char tmp; tmp = snd_ice1712_read(ice, ICE1712_IREG_GPIO_DATA); if (ice->eeprom.subvendor == ICE1712_SUBDEVICE_DELTA1010LT) { tmp &= ~ICE1712_DELTA_1010LT_CS; tmp |= ICE1712_DELTA_1010LT_CCLK | ICE1712_DELTA_1010LT_CS_CS8427; } else { /* Audiophile */ tmp |= ICE1712_DELTA_AP_CCLK | ICE1712_DELTA_AP_CS_CODEC; tmp &= ~ICE1712_DELTA_AP_CS_DIGITAL; } snd_ice1712_write(ice, ICE1712_IREG_GPIO_DATA, tmp); udelay(5); return tmp; }Quoted 5 lines
as a test, simply replace
ICE1712_SUBDEVICE_DELTA1010LTdefinition indelta.hwith your id (0xce164010).
then it should appear as if delta 1010LT.When I do
./configure --with-cards=ice1712 --with-sequencer=yes;make;make install it finishes like this:
/sbin/depmod-a 2.4.22-10mm.2mdksmp
depmod: *** Unresolved symbols in/lib/modules/2.4.22-10mm.2mdksmp/kernel/sound/acore/snd.oif [ -L /usr/include/sound ]; then \ rm -f /usr/include/sound; \ ln -sf /usr/src/alsa/alsa-driver-0.9.7a/include/sound /usr/include/sound; \ else \ rm -rf /usr/include/sound; \ install -d -m 755 -g root -o root /usr/include/sound; \ for f in include/sound/*.h; do \ install -m 644 -g root -o root $f /usr/include/sound; \ done \fi
if [ -d/sbin/init.d]; then \
install -m 755 -g root -o root utils/alsasound/sbin/init.d/alsasound;
\
elif [ -d/etc/rc.d/init.d]; then \
install -m 755 -g root -o root utils/alsasound/etc/rc.d/init.d/alsasound; \
elif [ -d/etc/init.d]; then \
install -m 755 -g root -o root utils/alsasound/etc/init.d/alsasound;
\
fiso when I try
modprobe snd-ice1712;modprobe snd-pcm-oss;modprobe snd-mixer-oss;modprobe snd-seq-oss
Quoted 6 lines
it returns
/lib/modules/2.4.22-10mm.2mdksmp/kernel/sound/acore/snd.o: unresolved symbolsnd_verbose_printk
modprobe: insmod/lib/modules/2.4.22-10mm.2mdksmp/kernel/sound/acore/snd.ofailed
modprobe: insmod snd-ice1712 failed
hmm, the installation was not correct.
did you get managed to install the alsa-driver before?
Quoted 9 lines
Quoted 9 lines
Quoted 8 lines
But what should I do? I can't programm. Please tell me which line to search and what tag to replace.
Thank You.
At the moment I downloaded datasheets from envy1712, AK4524 and CS8420 and printed the pin descriptions of each one to follow the tracks on the board.
Quoted 6 lines
Quoted 4 lines
only GPIO pins are used for communication with the codec chips. usually there are two or three pins via I2C or SPI mode for clock, data, and chip-select.
Well I found that theese pins are 50 to 53 and 56 to 59. is it?
likely. then it seems different from 1010LT...
Takashi
-------------------------------------------------------
This SF.net email is sponsored by: SF.net Giveback Program. SourceForge.net hosts over 70,000 Open Source Projects. See the people who have HELPED US provide better services:
Click here: http://sourceforge.net/supporters.php
Quoted 4 lines · Takashi Iwai
Quoted 3 lines · Jonatan de la Torre
Ice1712 has 128 pins,
Which among them should I test?
If you really want to: the GPIO pins; but this should not yet be necessary.
Quoted 1 line
did you try to add the id as delta 1010LT?
Probably not yet.
Jonatan, please save the attached file to your disk, go to the alsa-kernel/pci/ice1712 directory, and run the command
patch -p0 < patchfile
(with the correct path to the patchfile), then recompile and reinstall the driver.
HTH
Clemens
delta.c renamed from delta.c.org +11 -0
@@ -435,6 +435,7 @@break ;case ICE1712_SUBDEVICE_DELTA1010 :case ICE1712_SUBDEVICE_DELTA1010LT : +case 0xce164010 : ice->num_total_dacs =8 ;break ; }
@@ -444,6 +445,7 @@case ICE1712_SUBDEVICE_AUDIOPHILE :case ICE1712_SUBDEVICE_DELTA410 :case ICE1712_SUBDEVICE_DELTA1010LT : +case 0xce164010 :if ((err =snd_i2c_bus_create (ice->card,"ICE1712 GPIO 1" ,NULL , &ice->i2c)) <0 ) {snd_printk ("unable to create I2C bus\n" );return err;
@@ -488,6 +490,7 @@ err =snd_ice1712_akm4xxx_init (ak, &akm_delta410, &akm_delta410_priv, ice);break ;case ICE1712_SUBDEVICE_DELTA1010LT : +case 0xce164010 : err =snd_ice1712_akm4xxx_init (ak, &akm_delta1010lt, &akm_delta1010lt_priv, ice);break ;case ICE1712_SUBDEVICE_DELTA66 :
@@ -539,6 +542,7 @@return err;break ;case ICE1712_SUBDEVICE_DELTA1010LT : +case 0xce164010 : err =snd_ctl_add (ice->card,snd_ctl_new1 (&snd_ice1712_delta1010lt_wordclock_select, ice));if (err <0 )return err;
@@ -570,6 +574,7 @@/* ak4524 controls */ switch (ice->eeprom.subvendor) {case ICE1712_SUBDEVICE_DELTA1010LT : +case 0xce164010 :case ICE1712_SUBDEVICE_AUDIOPHILE :case ICE1712_SUBDEVICE_DELTA410 :case ICE1712_SUBDEVICE_DELTA44 :
@@ -630,5 +635,11 @@ snd_ice1712_delta_init, snd_ice1712_delta_add_controls, }, + { +0xce164010 , +"Edirol DA-2496" , + snd_ice1712_delta_init, + snd_ice1712_delta_add_controls, + }, { } /* terminator */ };