Skip to contentSkip to conversation

kernel BUG with bluetooth (2.6.0-test9)

DISCUSSION Steve Dunham 1 participant 1 message Nov 6, 2003

lore
Share & tools
lore
#0 lore raw

Actually, I'm having two bluetooth issues, first the one with full backtrace:

I occasionally get a system lockup when initiating a bluetooth connection from my Palm. (I'm using ppp over rfcomm, but I think this is occuring before the ppp stuff starts up.)

It looks like __module_get() in sk_set_owner() in l2cap_sock_alloc() is calling BUG_ON(module_refcount(module) == 0).

The kernel is 2.6.0-test9 with a uhci usb controller. Preempt is on, SCO is turned on, but I'm not sure if the module was loaded.

I'm also seeing the following in syslog/dmesg when the module loads:

hci_usb: Unknown symbol hci_unregister_dev
hci_usb: Unknown symbol hci_register_dev
hci_usb: Unknown symbol hci_unregister_dev
hci_usb: Unknown symbol hci_register_dev
hci_usb: probe of 1-1:1.1 failed with error -5
hci_usb: probe of 1-1:1.2 failed with error -5 drivers/usb/core/usb.c: registered new driver hci_usb
hci_usb_isoc_rx_submit: hci0 isoc rx submit failed urb caa1dc14 err
-22

I looked into the probe failed thing - it appears to be some additional stuff on the USB device. :1.0 contains whatever the hci_usb is using.

Dunno what's up with the unknown symbol stuff, the module is loaded, and bluetooth.ko appears to be exporting those symbols.

The kernel dump follows:

kernel BUG at include/linux/module.h:296!

invalid operand: 0000 [#1]
CPU:    0
EIP:    0060:[<cc8a9807>]    Not tainted
EFLAGS: 00010246

EIP is at l2cap_sock_alloc+0xc7/0xe0 [l2cap]
eax: 00000000 ebx: ca2e07e0 ecx: 00000000 edx: ca2e07e0
esi: 00000000 edi: c7f00780 ebp: 00000000 esp: c0443cd0
ds: 007b es: 007b ss: 0068
Process swapper (pid: 0, threadinfo=c0442000 task=c03c5f40)

Stack: cc8af900 00000000 00000024 00000020 c0442000 ca293254 cc8abcff
00000000
       00000000 00000020 c0443da4 c0442000 cc8d7091 c0443d20 00000296
c0443d20
       c0443dd4 c7f006c0 00000000 00000089 ca2e0ce0 00000001 00000040
00000000
Call Trace:
 [<cc8abcff>] l2cap_recv_frame+0x52f/0xe50 [l2cap]
 [<cc8d7091>] ip_conntrack_tuple_taken+0x41/0x60 [ip_conntrack]
 [<c0348fa5>] fib_validate_source+0x245/0x260
 [<c02642a8>] get_device+0x18/0x20
 [<cc874e29>] uhci_submit_common+0x229/0x2f0 [uhci_hcd]
 [<c02b55b8>] hcd_submit_urb+0x108/0x170
 [<c02b5ff1>] usb_submit_urb+0x1d1/0x250
 [<cc85d282>] hci_usb_rx_complete+0x1a2/0x6e0 [hci_usb]
 [<cc8acb9f>] l2cap_recv_acldata+0x16f/0x310 [l2cap]
 [<cc88f3f2>] hci_rx_task+0x1b2/0x350 [bluetooth]
 [<c011e536>] tasklet_action+0x46/0x70
 [<c011e345>] do_softirq+0x95/0xa0
 [<c010b0fb>] do_IRQ+0xfb/0x130
 [<c0105000>] _stext+0x0/0x60
 [<c01094f8>] common_interrupt+0x18/0x20
 [<c0105000>] _stext+0x0/0x60
 [<c011007b>] restore_i387_fxsave+0x3b/0x90
 [<c0106fb3>] default_idle+0x23/0x40
 [<c0107044>] cpu_idle+0x34/0x40
 [<c044470d>] start_kernel+0x14d/0x160
 [<c0444470>] unknown_bootoption+0x0/0x120
                                                                                
Code: 0f 0b 28 01 27 d0 8a cc eb 93 0f 0b cb 01 3e d0 8a cc e9 66
 <0>Kernel panic: Fatal exception in interrupt

In interrupt handler - not syncing

Second Problem (-test8 crash on remove)
==============
The second problem I'm having is with a crash on removal of the bluetooth device. I haven't yet reproduced it on the above machine (with serial console and -test9), but it happens with two of my desktops
running -test8. I managed to copy the stacktrace off of the screen
once on my work desktop (-test8, no preempt, SCO turned on):

On removal, it locks up at:

EIP: uhci_remove_pending_qhs+0x4e

    uhci_irq+0x90
    do_setitimer+0x1b1
    usb_hcd_irq+0x36

...

The instruction is: mov %edi,0x34(%ecx) -- %ecx is 0x80000300
right after a pushf/pop/cli.

It appears to be happening in list_add_tail() in the uhci_add_complete() call in uhci_remove_pending_qhs().

I'll try to reproduce it with a serial console in the next week or so.

Please CC me on any responses.
Thanks,
Steve Dunham
[email protected]
http://www.cse.msu.edu/~dunham