DRBD with LVM2

Hello,

Im currently testing a new setup for a HA samba fileserver. This setup is planned like this.

+----------+-------------------+------------------+
|          |       FS1         |       FS2        |
+----------+-------------------+------------------+
|          |      Pri          |      Sec         |
| reiserfs |      /home        |                  |
| lv       |  /dev/vg00/lv_01  |                  |
| vg       |     /dev/vg00     |                  |
| drbd     |     /dev/nb0      |    /dev/nb0      |
| phys. vol|     /dev/sda      |    /dev/sda      |
+----------+-------------------+------------------+

i can mount /home and read and write data. But when i try to make fs2 primary things got strange.

first i tried to switch the drbd state manually:

fs1:~ # cat /proc/drbd
version: 0.6.6 (api:62/proto:62)
0: cs:Connected st:Primary/Secondary ns:170804 nr:0 dw:65948 dr:170904 pe:0 ua:0

fs1:~ # vgs
VG #PV #LV #SN Attr VSize VFree
vg00 1 2 0 wz-- 100.00M 12.00M

then
fs1:~ # drbdsetup /dev/nb0 secondary
fs2:~ # drbdsetup /dev/nb0 primary

fs1:~ # cat /proc/drbd
version: 0.6.6 (api:62/proto:62)

0: cs:Connected st:Secondary/Primary ns:170804 nr:0 dw:65948 dr:170904 pe:0 ua:0

fs2:~ # cat /proc/drbd
version: 0.6.6 (api:62/proto:62)

0: cs:Connected st:Primary/Secondary ns:0 nr:170804 dw:170804 dr:20 pe:0 ua:0

all seems fine
but
fs2:~ # vgchange -ay
No volume groups found
also
fs2:~ # pvscan -v
Wiping cache of LVM-capable devices
Wiping internal cache
Walking through all physical volumes
No matching physical volumes found

That leeds me in a state, which makes the fs2 unusable. when i switch back to fs1 all is fine again.

Im using the following software components:

Kernel Suse-Linux-9.0 2.4.21-99
device-mapper-1.00.05
lvm2-2.00.07
drbd-0.6.6
heartbeat-1.0.3

any hints are welcome

greetings

Stefan Majer

x-cellent technologies GmbH