Skip to contentSkip to conversation

Kernel 2.6.0-test9, deadlock using usb-storage, eventually memory allocation bug

DISCUSSION Maximilian Mehnert 2 participants 2 messages Nov 17, 2003

lore
Share & tools
lore
#0 lore raw

Hello, everybody!

So far I have spoken to Jari Ruusu <[email protected]> who is maintaining loop-AES and to Matthew Dharm <[email protected]> who
seems to be maintaining usb-storage at the moment.

Jari Ruusu helped me by locating the whereabouts of the following bug by reading
my syslogs with debugging output from usb-storage and by providing some kernel patches to isolate the error:
I am using a harddisk attached via a cardbus usb 2.0 card. On it I have an encrypted partition which I access via loop-AES.
I can easily reproduce a complete deadlock in the usb-storage system by mounting
my encrypted partition or copying files to or from it (depends on configuration).

That's what Jari Ruusu wrote on Sun, 09 Nov 2003:

Quoted 3 lines

It was very similar memory allocation failure again: usb storage RAM alloc waited for pages to be freed, and all freeable pages were waiting to be written out to your usb device. Same thing, just different place.

Quoted 2 lines · Matthew Dharm

You should take this up with [email protected] -- it's a memory allocation problem, not a usb-storage problem. I can't fix it.

I did without posting my kernel config and my syslog files with the usb-storage messages as according to the FAQ this would be overkill.

If anybody is willing to help me I would gratefully send her/him all my logs and my previous correspondence on this topic :)

Greetings from Berlin && excuses for my bad English,

Maximilian

Signature · 7 lines
Maximilian Mehnert <mmehnert at gmx dot net>
http://members.lycos.co.uk/endofuniverse/gpg.html
Fingerprint: 387F 5AA6 5856 2A49 C88C  DA86 FBA8 5122 817B C60E


----------------------------------------------------------------
This message was sent using IMP, the Internet Messaging Program.
#1 lore raw
Quoted 2 lines · Maximilian Mehnert

If anybody is willing to help me I would gratefully send her/him all my logs and my previous correspondence on this topic :)

I think you may be hitting the same problem I did some time ago.

Please see
http://www.mail-archive.com/linux-usb-devel%40lists.sourceforge.net/msg17080.html

Try the attached patch Alan Stern made. You'll have to add a "," to the
end of "+ .max_sectors = 240" line.

Alan, this patch should be in queue for 2.6.0, right?

Vedran Rodic