Skip to contentSkip to conversation

Kernel oops at boot with 2.6.0-test9, 2.4.21ELsmp on Opteron 248

DISCUSSION Paul Venezia 1 participant 1 message Nov 21, 2003

lore
Share & tools
lore
#0 lore raw

I have a new dual Opteron 248 system here with an MSI K8T Master2-FAR mainboard that isn't happy with 2.6.0-test. In fact, it's not altogether happy with any SMP kernel so far, but will boot RedHat's 2.4.21EL single processor kernel and appears to function normally.

I'm having problems compiling 2.6.0-test9 through bk22 on this box, erroring here:

  CC      arch/x86_64/kernel/head64.o
  CC      arch/x86_64/kernel/init_task.o
  CPP     arch/x86_64/kernel/vmlinux.lds.s
  CC [M]  arch/x86_64/kernel/msr.o

make[1]: *** No rule to make target arch/x86_64/kernel/cpuid.c', needed by arch/x86_64/kernel/cpuid.o'. Stop.
make: *** [arch/x86_64/kernel] Error 2

I've tried various -mm patches, but error elsewhere:

CC arch/x86_64/kernel/nmi.o
arch/x86_64/kernel/nmi.c: In function `nmi_watchdog_tick':
arch/x86_64/kernel/nmi.c:317: warning: ISO C90 forbids mixed declarations and code
CC arch/x86_64/kernel/io_apic.o
arch/x86_64/kernel/io_apic.c:1215: redefinition of `disable_edge_ioapic_irq'
include/asm/io_apic.h:178: `disable_edge_ioapic_irq' previously defined here
arch/x86_64/kernel/io_apic.c:1259: redefinition of end_edge_ioapic_irq' include/asm/io_apic.h:180: end_edge_ioapic_irq' previously defined here arch/x86_64/kernel/io_apic.c:1346: redefinition of `mask_and_ack_level_ioapic_irq'
include/asm/io_apic.h:179: `mask_and_ack_level_ioapic_irq' previously defined here
include/asm/io_apic.h:178: warning: `disable_edge_ioapic_irq' defined but not used
include/asm/io_apic.h:179: warning: `mask_and_ack_level_ioapic_irq' defined but not used
include/asm/io_apic.h:180: warning: `end_edge_ioapic_irq' defined but not used
make[1]: *** [arch/x86_64/kernel/io_apic.o] Error 1
make: *** [arch/x86_64/kernel] Error 2

2.4.22 vanilla compile breaks at

gcc -D__KERNEL__ -I/usr/src/linux-2.4.22/include -Wall -Wstrict-prototypes -Wno-trigraphs -O2 -fno-strict-aliasing -fno-common -fomit-frame-pointer -mno-red-zone -mcmodel=kernel -pipe -fno-reorder-blocks -finline-limit=2000 -fno-strength-reduce
-Wno-sign-compare -fno-asynchronous-unwind-tables -nostdinc
-iwithprefix include -DKBUILD_BASENAME=mpparse -c -o mpparse.o mpparse.c
mpparse.c: In function `mp_register_ioapic':
mpparse.c:763: warning: long unsigned int format, different type arg (arg 5)
mpparse.c:763: warning: long unsigned int format, different type arg (arg 5)
mpparse.c: In function `mp_parse_prt':
mpparse.c:952: too few arguments to function `acpi_pci_link_get_irq' make[1]: *** [mpparse.o] Error 1
make[1]: Leaving directory `/usr/src/linux-2.4.22/arch/x86_64/kernel'
make: *** [_dir_arch/x86_64/kernel] Error 2

I removed ACPI support and the kernel built and booted, seeing both processors, but the tg3 driver wouldn't load, not finding the hardware,; the 2.4.21EL kernel has no issues with this module. Is there a patch I'm missing?

There was significant oddness with this kernel, however, as top would show CPU stats oscillating between 33.3% irq, softirq, and iowait per CPU, and 0.0% every odd second. This was on a quiescent system.

I can compile 2.6.0-test9-bk22 from Arjan's source RPM successfully. I'm obviously missing a patch. Regardless, an attempt to boot any 2.6.0 kernel, single or SMP fails on load with a

slab: error in check_poison_obj(): "biovec-#" object was modified after freeing

then a slew of acpi-related errors rapidly scroll ad infinitum.

A SMP boot of RedHat's 2.4.21-4.1EL kernel gives back:

Code: bad RIP value

then a call trace to stop_this_cpu.

A straight install of SuSE SLES 64 simply won't boot, as the kernel 2.4.19 kernel is SMP, and panics with the same error as above.

I don't have an older Opteron box, so I can't tell if this is related to the new CPUs or not.

-Paul