Skip to contentSkip to conversation

Kernel oops at boot with 2.6.0-test9, 2.4.21ELsmp on Opteron 248

DISCUSSION Paul Venezia 2 participants 3 messages Nov 21, 2003 – Nov 24, 2003

lore
Share & tools
lore
#0 lore raw

I meant to include more complete traces in my previous post, but I'm having some odd problem with serial consoles on this box so I only get partial clean output. Here's what I can gather at the moment:

2.6.0-test9 (snip):

Call Trace:<ffffffff8014aed4>{__kmalloc+186}
<ffffffff80186f64>{proc_create+100} 
       <ffffffff801870f2>{create_proc_entry+96}
<ffffffff801321ce>{register_proc_table+176} 
       <ffffffff801321ff>{register_proc_table+225}
<ffffffff801321ff>{register_proc_table+225} 
       <ffffffff803f0688>{sysctl_init+20}
<ffffffff803e56ec>{do_basic_setup+11} 
       <ffffffff8010b05b>{init+32} <ffffffff8010b03b>{init+0} 
       <ffffffff80110acf>{child_rip+8} <ffffffff8010b03b>{init+0} 
       <ffffffff80110ac7>{child_rip+0} 

Slab corruption: start=0000010037f08748, expend=0000010037f08807, problemat=0000010037f0874c
Last user: [<0000000000000000>](0x0)
Data: ....00 00 00 00 ....00 00 00 00 ....00 00 00 00 ....00 00 00 00 ....00 00 00 00 ....00 00 00 00 ....00 00 00 00 ....00 00 00 00 ....00 00 00 Next: 71 F0 2C .00 00 00 00 00 00 00 00 00 00 00 00 A5 C2 0F 17 00 00 00 00 84 10 0C 00 00 00 00 00
slab error in check_poison_obj(): cache `size-192': object was modified after freeing

2.4.21EL-4.0smp:

RIP: 0010:[<000000008010de3e>]
RSP: 0018:00000100077cbfc8  EFLAGS: 00010246
RAX: 0000000000000000 RBX: ffffffff8010de20 RCX: 00000000ffffffff
RDX: 00000100077ca000 RSI: 0000000000000001 RDI: ffffffff806031c0
RBP: ffffffff8010de20 R08: 00000000ffffffff R09: 0000000000000003
R10: 0000000000000001 R11: 0000000000000000 R12: 0000000000000000
R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000
FS:  0000000000000000(0000) GS:ffffffff805fb580(0000)
knlGS:0000000000000000
CS:  0010 DS: 0018 ES: 0018 CR0: 000000008005003b
CR2: 000000008010de3e CR3: 00000000079b9000 CR4: 00000000000006e0
Call Trace: [<ffffffff8010de20>]{default_idle+0}

[<ffffffff8010dec9>]{cpu_idle+73}

Process swapper (pid: 0, stackpage=100077cb000)

Stack: 00000100077cbfc8 0000000000000018 ffffffff8010de20
ffffffff8010dec9 
       0000000000000010 0000000000000405 0000000000000001
ffffffff8063abef 
       0000000000000000 0000000000000002 
Call Trace: [<ffffffff8010de20>]{default_idle+0}

[<ffffffff8010dec9>]{cpu_idle+73}

Code: Bad RIP value.

Kernel panic: Fatal exception

In idle task - not syncing

#1 lore raw
Quoted 4 lines · Paul Venezia

I meant to include more complete traces in my previous post, but I'm having some odd problem with serial consoles on this box so I only get partial clean output. Here's what I can gather at the moment:

this may be a case of "the" bios bug; could you try passing "idle=poll" to the kernel ?
If that helps you need a newer bios....

#2 lore raw
Quoted 10 lines · Arjan van de Ven
Quoted 4 lines · Paul Venezia

I meant to include more complete traces in my previous post, but I'm having some odd problem with serial consoles on this box so I only get partial clean output. Here's what I can gather at the moment:

this may be a case of "the" bios bug; could you try passing "idle=poll" to the kernel ?
If that helps you need a newer bios....

I had checked for a newer BIOS for this board, but there isn't a newer version available. Passing idle=poll permits the RH 2.4.21EL-smp kernel to boot, and mysql is now functional. 2.6.0-test9, test9-smp, test10, and test10-smp still will not boot.

-Paul