2.6.0-test10 hanging on drive detection
When I boot 2.6.0-test10, it hangs on this message:
hdd: ATAPI 40X DVD-ROM drive 512kB Cache, UDMA(33)
Quoted 1 line
From my .config:
grep -i ata .configCONFIG_X86_MCE_NONFATAL=y
# ATA/ATAPI/MFM/RLL support
# CONFIG_SCSI_SATA is not set
# CONFIG_SCSI_EATA is not set
# CONFIG_SCSI_EATA_PIO is not set
# CONFIG_ATALK is not set
# CONFIG_USB_STORAGE_DATAFAB is not set
# CONFIG_ATARI_PARTITION is not set
grep -i IDE .configCONFIG_IDE=yCONFIG_BLK_DEV_IDE=y
# Please see Documentation/ide.txt for help/info on IDE drives # CONFIG_BLK_DEV_HD_IDE is not set CONFIG_BLK_DEV_IDEDISK=yCONFIG_IDEDISK_MULTI_MODE=y
# CONFIG_IDEDISK_STROKE is not set CONFIG_BLK_DEV_IDECD=y
# CONFIG_BLK_DEV_IDETAPE is not set
# CONFIG_BLK_DEV_IDEFLOPPY is not set
# CONFIG_BLK_DEV_IDESCSI is not set
# CONFIG_IDE_TASK_IOCTL is not set
# CONFIG_IDE_TASKFILE_IO is not set
# IDE chipset support/bugfixes
# CONFIG_BLK_DEV_IDEPNP is not set CONFIG_BLK_DEV_IDEPCI=y
# CONFIG_IDEPCI_SHARE_IRQ is not set CONFIG_BLK_DEV_IDEDMA_PCI=y
# CONFIG_BLK_DEV_IDEDMA_FORCED is not set CONFIG_IDEDMA_PCI_AUTO=y
# CONFIG_IDEDMA_ONLYDISK is not set
# CONFIG_IDEDMA_PCI_WIP is not set CONFIG_BLK_DEV_IDEDMA=y
# CONFIG_IDEDMA_IVB is not setCONFIG_IDEDMA_AUTO=yCONFIG_IEEE1394_VIDEO1394=m
# CONFIG_VIDEO_DEV is not set
# Digital Video Broadcasting Devices CONFIG_VIDEO_SELECT=y
# CONFIG_FB_TRIDENT is not set
# CONFIG_SND_TRIDENT is not set
# Video4Linux support is needed for USB Multimedia device support
If there is any other information I can supply, please tell me.
Thanks,
Harold
Fixed in test11
Harold
Quoted 58 lines · Harold Martin
When I boot 2.6.0-test10, it hangs on this message:
hdd: ATAPI 40X DVD-ROM drive 512kB Cache, UDMA(33)Quoted 1 line
From my .config:
grep -i ata .config
CONFIG_X86_MCE_NONFATAL=y
# ATA/ATAPI/MFM/RLL support
#CONFIG_SCSI_SATAis not set
#CONFIG_SCSI_EATAis not set
#CONFIG_SCSI_EATA_PIOis not set
#CONFIG_ATALKis not set
#CONFIG_USB_STORAGE_DATAFABis not set
#CONFIG_ATARI_PARTITIONis not setgrep -i IDE .config
CONFIG_IDE=yCONFIG_BLK_DEV_IDE=y
# Please seeDocumentation/ide.txtfor help/info on IDE drives #CONFIG_BLK_DEV_HD_IDEis not setCONFIG_BLK_DEV_IDEDISK=yCONFIG_IDEDISK_MULTI_MODE=y
#CONFIG_IDEDISK_STROKEis not setCONFIG_BLK_DEV_IDECD=y
#CONFIG_BLK_DEV_IDETAPEis not set
#CONFIG_BLK_DEV_IDEFLOPPYis not set
#CONFIG_BLK_DEV_IDESCSIis not set
#CONFIG_IDE_TASK_IOCTLis not set
#CONFIG_IDE_TASKFILE_IOis not set
# IDE chipset support/bugfixes
#CONFIG_BLK_DEV_IDEPNPis not setCONFIG_BLK_DEV_IDEPCI=y
#CONFIG_IDEPCI_SHARE_IRQis not setCONFIG_BLK_DEV_IDEDMA_PCI=y
#CONFIG_BLK_DEV_IDEDMA_FORCEDis not setCONFIG_IDEDMA_PCI_AUTO=y
#CONFIG_IDEDMA_ONLYDISKis not set
#CONFIG_IDEDMA_PCI_WIPis not setCONFIG_BLK_DEV_IDEDMA=y
#CONFIG_IDEDMA_IVBis not setCONFIG_IDEDMA_AUTO=yCONFIG_IEEE1394_VIDEO1394=m
#CONFIG_VIDEO_DEVis not set
# Digital Video Broadcasting DevicesCONFIG_VIDEO_SELECT=y
#CONFIG_FB_TRIDENTis not set
#CONFIG_SND_TRIDENTis not set
# Video4Linux support is needed for USB Multimedia device supportIf there is any other information I can supply, please tell me.
Thanks,
Harold-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/