Skip to contentSkip to conversation

problem whith htb script

LARTC saptah 4 participants 4 messages Jan 4, 2004 – Jan 6, 2004

lore
Share & tools
lore

saptah

author
#0 lore raw

Hi all && happy new Year ;)

I'm try to made a script for shaping my outgoing traffic, but it doesn't work fine.
The script work good if all packets go thru the default class, but, if I try to send packets by other class, the packes doesn't go by this class go also by the default class.

This script is installed in a router linux with ip masquerading for the clients.

¿how I can classify the packets in this classes?

thx 4 all ;) and sorry for my (bad) english :P

##### My script ######
#!/bin/bash
#QoS ;)
DEV=eth1
RATEUP0 #En KiloBytes

# borro las bandas
tc qdisc del dev $DEV root 2> /dev/null > /dev/null
tc qdisc del dev $DEV ingress 2> /dev/null > /dev/null
tc qdisc del dev $DEV root 2> /dev/null > /dev/null
iptables -F   #también las relgas iptables

#creacion del arbol de bandas
tc qdisc add dev $DEV root handle 2: htb default 60
tc class add dev $DEV parent 2: classid 2:1 htb rate 120kbps ceil ${RATEUP}kbps
tc class add dev $DEV parent 2:5 classid 2:50 htb rate $[70*$RATEUP/100]kbps ceil ${RATEUP}kbps
tc class add dev $DEV parent 2:6 classid 2:60 htb rate $[20*$RATEUP/100]kbps ceil ${RATEUP}kbps prio 1
tc class add dev $DEV parent 2:7 classid 2:70 htb rate $[10*$RATEUP/100]kbps ceil ${RATEUP}kbps prio 2

#asociacion de colas sfq con bandas
tc qdisc add dev $DEV parent 2:50 handle 50: sfq
tc qdisc add dev $DEV parent 2:60 handle 60: sfq
tc qdisc add dev $DEV parent 2:70 handle 70: sfq

#se asocian marcas con bandas
tc filter add dev $DEV protocol ip parent 2: handle 5 fw classid 2:50 tc filter add dev $DEV protocol ip parent 2: handle 6 fw classid 2:60 tc filter add dev $DEV protocol ip parent 2: handle 7 fw classid 2:70

#reglas de filtrado

#tc filter add dev $DEV parent 2: protocol ip prio 0 u32 match ip dport
21 0xffff flowid 2:50 #envia algo
#tc filter add dev $DEV parent 2: protocol ip prio 0 u32 match ip dport
20 0xffff flowid 2:50 #envia algo

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/

#1 lore raw
Quoted 8 lines · saptah

Hi all && happy new Year ;)

I'm try to made a script for shaping my outgoing traffic, but it doesn't work fine.
The script work good if all packets go thru the default class, but, if I try to send packets by other class, the packes doesn't go by this class go also by the default class.

Quoted 6 lines

This script is installed in a router linux with ip masquerading for the clients.

¿how I can classify the packets in this classes?

thx 4 all ;) and sorry for my (bad) english :P

No problem.
Are you trying to match ftp traffic? Is so, you can have a problem because ftp can use dynamic ports. So it's not easy to filter out ftp traffic. You also use a combination of fw and u32 filter. But for that fw filter, I don't see the needed iptables rules.

Stef

Signature · 8 lines
[email protected]
 "Using Linux as bandwidth manager"
     http://www.docum.org/
     #lartc @ irc.openprojects.net

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
#2 lore raw
In reply to saptah

Hi all,

The ftp uses dynamic ports in source not in destiny so it is possible mark ftp traffic and shape.

[]´s
Anderson

Quoted 4 lines · saptah
Quoted 3 lines

Hi all && happy new Year ;)

I'm try to made a script for shaping my outgoing traf

fic, but it doesn't

Quoted 2 lines
Quoted 2 lines

work fine.
The script work good if all packets go thru the defau

lt class, but, if I

Quoted 1 line
Quoted 1 line

try to send packets by other class, the packes doesn'

t go by this class

Quoted 3 lines
Quoted 3 lines

go also by the default class.

This script is installed in a router linux with ip ma

squerading for the

Quoted 7 lines
Quoted 5 lines

clients.

¿how I can classify the packets in this classes?

thx 4 all ;) and sorry for my (bad) english :P

No problem.
Are you trying to match ftp traffic? Is so, you can ha

ve a problem because

Quoted 1 line

ftp can use dynamic ports. So it's not easy to filter

out ftp traffic.

Quoted 1 line

You also use a combination of fw and u32 filter. But f

or that fw filter, I

Quoted 13 lines

don't see the needed iptables rules.

Stef

Signature · 8 lines
[email protected]
 "Using Linux as bandwidth manager"
     http://www.docum.org/
     #lartc @ irc.openprojects.net

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: ht

tp://lartc.org/

Quoted 1 line

__________________________________________________________________________
Acabe com aquelas janelinhas que pulam na sua tela. AntiPop-up UOL - É grátis!
http://antipopup.uol.com.br/

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/

#3 lore raw
In reply to saptah
Quoted 4 lines · andybr

Hi all,

The ftp uses dynamic ports in source not in destiny so it is possible mark ftp traffic and shape.

Use CONNMARK to mark packet it put the same MARK on all the packet of the connection. So mark follow any non-linear protocol recognized by Netfilter.
For more information on usage see :
http://home.regit.org/connmark.html

BR,

Signature · 2 lines
Eric Leblond
NuFW, Now User Filtering Works (http://www.nufw.org)