Skip to contentSkip to conversation

IMQ Runtime error

LARTC tc 3 participants 3 messages Jan 25, 2004 – Jan 26, 2004

lore
Share & tools
lore

tc

author
#0 lore raw

hi all, i have applied all patches and compiled the kernel (2.4.21), iptables (1.2.9) and iproute2 (2.4.7-now-ss020116) however when i run "modprobe imq numdevs=1", the system returns - imq.o: init_module: Device or resource busy

the transcript is below -

[root@vmlinux project]# modprobe imq numdevs=1 /lib/modules/2.4.21-BW/kernel/drivers/net/imq.o: init_module: Device or resource busy
Hint: insmod errors can be caused by incorrect module parameters, including invalid IO or IRQ parameters.
You may find more information in syslog or the output from dmesg
/lib/modules/2.4.21-BW/kernel/drivers/net/imq.o: insmod /lib/modules/2.4.21-BW/kernel/drivers/net/imq.o failed /lib/modules/2.4.21-BW/kernel/drivers/net/imq.o: insmod imq failed

what could be wrong? thanks all,
bye
joseph
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/

#1 lore raw

even if imq is quite useless right now
this eeror is caused probably by other loaded modules for userspace queue nf_queue probably
since imq uses the same function

----- Original Message -----
From: "tc" <[email protected]>
To: <[email protected]>
Sent: Monday, January 26, 2004 1:33 AM
Subject: [LARTC] IMQ Runtime error

Quoted 3 lines

hi all, i have applied all patches and compiled the kernel (2.4.21), iptables
(1.2.9) and iproute2 (2.4.7-now-ss020116) however when i run '"'modprobe

imq

Quoted 1 line

numdevs=1'"', the system returns - imq.o: init_module: Device or resource

busy

Quoted 5 lines

the transcript is below -

[root@vmlinux project]# modprobe imq numdevs=1 /lib/modules/2.4.21-BW/kernel/drivers/net/imq.o: init_module: Device or

resource

Quoted 2 lines

busy
Hint: insmod errors can be caused by incorrect module parameters,

including

Quoted 6 lines

invalid IO or IRQ parameters.
You may find more information in syslog or the output from dmesg
/lib/modules/2.4.21-BW/kernel/drivers/net/imq.o: insmod /lib/modules/2.4.21-BW/kernel/drivers/net/imq.o failed /lib/modules/2.4.21-BW/kernel/drivers/net/imq.o: insmod imq failed

Quoted 7 lines

what could be wrong? thanks all,
bye
joseph
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/

#2 lore raw
In reply to tc
Quoted 1 line · Roy

even if imq is quite useless right now

I thought it was OK for inbound traffic.

What sort of load/traffic do you see crashes with.

I have an old P200 as a gateway and can run bittorrents on it, with IMQ
doing outbound for locally generated traffic (not that I really need
to) and can do > a gig/day without ever crashing. I do close down at night though, and only have 256/512 bandwidth. Is this way below what you need to do to crash?

Quoted 3 lines

this eeror is caused probably by other loaded modules for userspace queue nf_queue probably
since imq uses the same function

Yea this is a pain, I would like to run a userspace for up and IMQ for down, but can't use lib_ipq at the same time as IMQ.
It has been suggested that I can work round this, but I haven't tried yet. Do you think it's possible?

Andy.

Quoted 45 lines

----- Original Message -----
From: "tc" <[email protected]>
To: <[email protected]>
Sent: Monday, January 26, 2004 1:33 AM
Subject: [LARTC] IMQ Runtime error

Quoted 3 lines

hi all, i have applied all patches and compiled the kernel (2.4.21), iptables
(1.2.9) and iproute2 (2.4.7-now-ss020116) however when i run '"'modprobe

imq

Quoted 1 line

numdevs=1'"', the system returns - imq.o: init_module: Device or resource

busy

Quoted 4 lines

the transcript is below -

[root@vmlinux project]# modprobe imq numdevs=1 /lib/modules/2.4.21-BW/kernel/drivers/net/imq.o: init_module: Device or

resource

Quoted 2 lines

busy
Hint: insmod errors can be caused by incorrect module parameters,

including

Quoted 6 lines

invalid IO or IRQ parameters.
You may find more information in syslog or the output from dmesg
/lib/modules/2.4.21-BW/kernel/drivers/net/imq.o: insmod /lib/modules/2.4.21-BW/kernel/drivers/net/imq.o failed /lib/modules/2.4.21-BW/kernel/drivers/net/imq.o: insmod imq failed

Quoted 7 lines

what could be wrong? thanks all,
bye
joseph
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/

Quoted 4 lines

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/