Skip to contentSkip to conversation

Prioritizing UDP Packets?

LARTC Sommarnatt 2 participants 3 messages Jan 29, 2004 – Jan 30, 2004

lore
Share & tools
lore

Sommarnatt

author
#0 lore raw

Greetings,
I'm new to LARTC and I'm trying to solve a problem with multiple clients accessing a game server. So I thought I'd give traffic control a shot.

I've downloaded Wonder Shaper and have added this to the default script:

tc filter add dev $DEV parent 1:0 protocol ip prio 12 u32 \
match ip protocol 0x6 0xff flowid 1:3

I'm now quite sure about everything in the script - all I want is to prioritize the UDP traffic, so that it always gets sent and recieved.
What should I remove / add?

Any help is appreciated!

Thank you.

Kind Regards,
Sommarnatt
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/

#1 lore raw
Quoted 5 lines · Sommarnatt

I've downloaded Wonder Shaper and have added this to the default script:

tc filter add dev $DEV parent 1:0 protocol ip prio 12 u32 \
match ip protocol 0x6 0xff flowid 1:3

There is no flowid 1:3 in the default script. was that supposed to be 1:30 ?

Quoted 3 lines

I'm now quite sure about everything in the script - all I want is to prioritize the UDP traffic, so that it always gets sent and recieved.
What should I remove / add?

The above rule matches tcp traffic and puts it in the low priority queue (if you used 1:30).
I guess this would therefore make UDP faster.
you might also want to try putting UDP in flow 1:10

This won't affect download UDP traffic though, the wondershaper only shapes outbound (sent) traffic, and polices inbound (received) traffic. If you want to prioritize downloaded UDP traffic, you'll need to use 2 network interfaces, or play around with the IMQ device.
(or one of the other suggestions that have been discussed recently)

regards

Signature · 11 lines
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Damion de Soto - Software Engineer  email:     [email protected]
SnapGear - A CyberGuard Company ---    ph:         +61 7 3435 2809
  | Custom Embedded Solutions          fax:         +61 7 3891 3630
  | and Security Appliances            web: http://www.snapgear.com
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
  ---  Free Embedded Linux Distro at   http://www.snapgear.org  ---

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
author
#2 lore raw
In reply to Sommarnatt

Quoting Damion de Soto <[email protected]>:

Quoted 7 lines
Quoted 5 lines · Sommarnatt

I've downloaded Wonder Shaper and have added this to the default script:

tc filter add dev $DEV parent 1:0 protocol ip prio 12 u32 \
match ip protocol 0x6 0xff flowid 1:3

There is no flowid 1:3 in the default script. was that supposed to be 1:30 ?

Yes it seems I didn't copy it right. Changed it to 1:10.

Quoted 10 lines
Quoted 1 line

I'm now quite sure about everything in the script - all I want is to

prioritize

Quoted 2 lines

the UDP traffic, so that it always gets sent and recieved. What should I remove / add?

The above rule matches tcp traffic and puts it in the low priority queue (if you used
1:30).
I guess this would therefore make UDP faster.
you might also want to try putting UDP in flow 1:10

Quoted 6 lines

This won't affect download UDP traffic though, the wondershaper only shapes outbound (sent) traffic, and polices inbound (received) traffic. If you want to prioritize downloaded UDP traffic, you'll need to use 2 network
interfaces, or play around with the IMQ device.
(or one of the other suggestions that have been discussed recently)

Alright. I'll have to read the howto on this, haven't had the time yet :/

Thanks for your help!

Quoted 18 lines

regards

Signature · 11 lines
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Damion de Soto - Software Engineer  email:     [email protected]
SnapGear - A CyberGuard Company ---    ph:         +61 7 3435 2809
  | Custom Embedded Solutions          fax:         +61 7 3891 3630
  | and Security Appliances            web: http://www.snapgear.com
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
  ---  Free Embedded Linux Distro at   http://www.snapgear.org  ---

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/