orinoco_cs IRQ problem with 2.6.0

I'm new to the list. My D-Link cardbus wireless card worked fine under 2.4.22 using the orinoco_cs drivers, and the pcmcia-cs-3.2.5 package.

Under 2.6.0, with the orinoco_cs driver, I get the following errors in my syslog:

Jan 29 19:29:07 localhost cardmgr[684]: initializing socket 0
Jan 29 19:29:07 localhost cardmgr[684]: socket 0: D-Link DWL-650
Jan 29 19:29:07 localhost cardmgr[684]:   product info: "D", "Link DWL-650 11Mbps WLAN Card", "Version 01.02", ""
Jan 29 19:29:07 localhost cardmgr[684]:   manfid: 0x0156, 0x0002  function: 6 (network)
Jan 29 19:29:07 localhost cardmgr[684]: executing: 'modprobe orinoco_cs'
Jan 29 19:29:07 localhost kernel: orinoco.c 0.13e (David Gibson <[email protected]> and others)
Jan 29 19:29:07 localhost kernel: orinoco_cs.c 0.13e (David Gibson <[email protected]> and others)
Jan 29 19:29:07 localhost kernel: orinoco_cs: RequestIRQ: Unsupported mode
Jan 29 19:29:08 localhost cardmgr[684]: get dev info on socket 0 failed: Resource temporarily unavailable

With 2.4.22, the card was assigned irq 3. With 2.6.0, that irq is not listed in my /proc/interrupts.

Dan Lenski
[email protected]

This problem should be fixed in 2.6.1.

Russell King
 Linux kernel    2.6 ARM Linux   - http://www.arm.linux.org.uk/
 maintainer of:  2.6 PCMCIA      - http://pcmcia.arm.linux.org.uk/
                 2.6 Serial core