Skip to contentSkip to conversation

Per Ip bandwidth

LARTC Claudiu Pruna 1 participant 1 message Jan 31, 2004

lore
Share & tools
lore
#0 lore raw

Hi there,

I have two questions:

1)
In the following setup:

tc qdisc add dev eth1 root handle 1: htb
tc class add dev eth1 parent 1: classid 1:1 htb rate 100Mbit tc class add dev eth1 parent 1:1 classid 1:10 htb rate 128Kbit tc class add dev eth1 parent 1:10 classid 1:11 htb rate 32Kbit ceil 128Kbit
tc class add dev eth1 parent 1:10 classid 1:12 htb rate 32Kbit ceil 128Kbit

I have observed that if the user whois ip is going to class 1:11 has
more threads, that that fro9m class 1:12 then, there is no more fairness in borrowing, so that user with 1:11 gets almost all the unused bandwidth from the parent ( going up to 96Kbit/s ).

2)
why do I get " qdisc pfifo_fast 0: [Unknown qdisc, optlen ] " at tc
qdisc ls dev eth0 right after booting the computer, without attaching yet any qdisc ??

Thank for your ideeas.

-------

Claudiu Pruna
mail: [email protected]
web: http://www.net-go.net

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/